- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
its possible that your filler neck is porous and is the problem(rare). while filling have you looked under to see where the leak is coming from. the ash substance happens on a lot of rubber parts as the environment begins to break down the rubber.
Give me a make and model number of the dishwasher.
Check that the drain hose isn't kinked, and that where the drain connects at the garbage disposal at the sink isn't partially clogged. And, is the garbage disposal clean/clear of food stuff's. I had a similar thing happen to me a few weeks ago, and it turned out the kitchen sink drain line was clogged.
with the door open push the door switch and tailgate switch closed manually. if the warning stays on, replace the switch. if it stops, adjust the switch to make sure the door or tailgate pushes it down far enough.
You will probably end up having to break the ashtray to get it out. This happens on most cars when ppl use the ashtray as coil holders. Just pull really hard and rip the tray out, see if you cause any damage. Sorry, but this is the only way ive done it in the past.
located where the ash tray is. Just below the ash tray compartment. Remove the ash tray' Then press down on the releae trim just below and a compartment pulls out. This gives access to fuses and relays located here.
For the owners manual, ebay is a good refernece for it and then would check with the dealership.
Remove the ash tray, if I remember correctly there are three or four screws that mount the ash tray bracket (two are vertical and require a very short screwdriver). WIth this bracket removed, it exposes the bracket that mounts the radio, two or three screws there as well, then the radio just slides out of the dash. The radio will pull out far enough to be able to disconnect the wiring and antenna cable.