Question about Cars & Trucks

Open Question

1993 toyota corolla A/C Compressor Bypass Pulley replacing

How to replace?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: Needing to remove ac compressor to install ac bypass pulley

There are a couple of ways to approach this. I just did one of these for a friend. The A/C pump seized while running. The serpentine belt broke. Crazy things can happen to other components when this occurs. In this case the broken ends of the belt, I think, whipped back around on itself on the crankshaft pulley and one of the other pulleys in the belt circuit and devastation occurred. 1) It snapped the power steering pump bracket in two. 2) It took out the alternator. 3) And not to be left out, GOODBYE cool blowin air conditioning. Time to decide what to do. He had to order the power steering bracket from a dealer (junk yards were cleaned out). He decided to replace the power steering pump with a remanufactured unit and new hoses (parts houses are much cheaper than dealer parts folks). You'll need a pulley remover that you can usually borrow (with a deposit) from some parts houses. He HAD to buy the alternato ya gotta have juice. I have been using the name, "parts houses" . (Can we use specific company names in this forum MR./MS. Editors ? I Feel I need to for the sake of all of us that come here for correct information.) THE ANSWER : DO you want to drop the bucks into fixing your A/C ? NO ? It can be involved and costly depending on how good of a do it yourselfer you are. New pumps are spendy. Then, if you use the older refridgerant you'll need a conversion kit and blah blah blah. YOU have opted for a bypass pulley. COOL ! Errrr...not actually. It's coming out. The bolts that hold the A/C pump to its bracket come out from BEHIND the bottom of the unit. They are long and won't clear the intake manifold,at least not easily. Take the bracket bolts out from the front. Take the hose from the pump to the dryer apart (at the dryer). Do you want to preserve the system for future repair? If so, cover that connection on the dryer to protect it from the world. With a sharp blade, cut the other hose coming off the pump right behind the grill. Or, try to take the fitting apart at the evaporator. Cutting it is easier. Plug the cut off end if ya want. Future repair thing. Rotate the pump forward so you can either take the bolts out,or remove the pump and bracket as a unit, with the lengths of hose attatched to the pump. This gets all that hose you no longer need out of the engine compartment. NOW THE BYPASS PULLEY. He found a pulley from NAPA. IT DOES NOT WORK ! YOU DO NOT NEED IT ! Nothing against NAPA. I have bought good parts from them before. Maybe their supplier does not know. The pulley is supposed to drop into the A/C bracket in the concave recess that the pump once occupied. IT WASN'T EVEN CLOSE. Chevy released THREE versions: Poor Boy-no power steering,no A/C. MIDMan-power steering,no A/C. Rich Guy-power steering,with A/C. SO....... If you have power steering, the A/C pump removal just put you into Midman status. Stop at your local chevy dealer, ask them to print you a belt routing diagram from the computer parts book. It shows all three versions. Go to your local,,,,,,,"PARTS HOUSE", tell them info...year,make,engine size, REMEMBER.. IT NO LONGER HAS AIR CONDITIONING. YOU'LL GET A SHORTER BELT !! IF, they sold you the bypass pulley.....GET YOUR MONEY BACK !!! Use the diagram you got. The belt is routed a little different since you lost the A/C pump and the idler pulley with it's bracket(that you can keep for future repair or trade in for to be made into beer cans) Also remember that without a belt on, the tensioner pulley is swung over to the end of it,s range of motion. When you get the belt routed correctly you have to put a wrench on the bolt on the pulley and turn hard to compress the spring. (COUNTERCLOCKWISE) The bolt is left hand thread so it won't come loose while ya reef on it to get the belt swung onto the ALTERNATOR LAST.<<<<<<GOOD LUCK !!! ADDED NOTE: Would that bypass pulley work on say...an "88" or "89" or "90" ? > I DO NOT KNOW. DID CHEVY change the size of the pump bracket after 87 ? We will be letting the good folks at NAPA know what we ran into and how we fixed it. We also will ask for a refund on the wrong part for the job. IT DOES NOT FIT AN 87! WE DO KNOW THIS..... IF the belt had just broke in half and safely dropped away, then all those parts wouldn't have been needed and the cost of the fix is FOR A SHORTER BELT and a little sweat to remove the A/C pump and bracket. The A/C NEVER WORKED ANYWAY

Posted on Jun 23, 2008

  • 1861 Answers

SOURCE: replace rear seat belt in 1993 Toyota Corolla

OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).

Posted on Oct 07, 2008

  • 20 Answers

SOURCE: How do I replace the fuel filter on my 2006 Toyota Corolla?

ITS A LIFETIME FILTER AND WITH REGULAR USE, SHOULD NEVER NEED TO BE REPLACED

Posted on May 24, 2009

emissionwiz
  • 75822 Answers

SOURCE: need to bypass the a/c compressor with pulley

see the dealer for the delete AC pulley, that is the only place to get it.

Posted on Aug 28, 2009

  • 248 Answers

SOURCE: How do I replace "front brakes" toyota corolla

Replacing front disc brakes is a relatively easy task. The attached link will walk you through the steps:

http://www.ehow.com/how_4520110_replace-front-disc-brakes-toyota.html

Please remeber to rate this solution. Thanks!

Posted on Feb 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac


the relay is there for a reason, ide start there

Mar 15, 2012 | 1993 Toyota Corolla

1 Answer

I HAVE A 93 CHEVY P/U 4.3L HAS A/C & P/S NO AIR PUMP. MY A/C COMPRESSOR LOCKED UP AND I DONT HAVE MONEY TO REPLACE IT CAN I JUST BUY THE BELT FOR NO A/C AND BYPASS THE A/C COMPRESSOR ?


This is what you are looking for. You can use your old belt. rockauto.com


1993 CHEVROLET K1500 PICKUP 4.3L 262cid V6 TBI (Z) OHV : Heat & Air Conditioning : A/C Compressor Bypass Pulley Wiki Price DORMAN Part # 34152 moreinfo2.png {#10118713} 34152-007.jpg $28.79 Add to Cart addtocart2.png

Jul 21, 2011 | 1993 Chevrolet K1500

1 Answer

How to remove a/c compressor clutch and pullley on denso 6seu14c. mounted in toyota corolla 2007.the pulley bearing is so noisy,i want to replace it but i cant remove the clutch and pulley.


Most technicians don't bother removing the clutch and pulley when there is too much noise, and instead replace the entire a/c compressor after removing the refrigerant.

Good luck on this repair.

Jan 01, 2011 | 2007 Toyota Corolla

1 Answer

2004 frontier truck 2.4 L ac belt was changed compressor froze up what causes this?


Well that depends on exactly what froze up. The options are the pulley bearing, and the compressor itself. Both repairs require special tools and training. take it to a qualified shop.

Sep 15, 2010 | 1993 Toyota Corolla

1 Answer

1993 toyota corolla how to replace watwr pump


  1. Place the water pump gasket (O-ring) on the block and install the pump. Tighten the mounting bolts evenly to 11 ft. lbs. (15 Nm). Install the timing belt covers, making sure they are properly seated and not rubbing on the belt or other moving parts. Install a new seal (O-ring) on the dipstick tube and lightly coat it with engine oil. Remove the plug and install the dipstick tube and dipstick; secure the mounting bolt to 82 inch lbs. (9 Nm).
Using a new O-ring, install the inlet pipe to the water pump.
Attach the clamps and bolts to hold the pipe in place and tighten to 7-9 ft. lbs. (9-12 Nm).
Connect the water inlet and water bypass hoses to the inlet pipe.
Install the water pump pulley and temporarily tighten the four pulley bolts.
Install the drive belts on all the pulleys and adjust all of them to the correct tension.
With the belts in place and adjusted, the water pump pulley will now resist turning. Tighten the pulley bolts to 16-18 ft. lbs. (22-24 Nm).
Install the front engine mount (mounting insulator).
Confirm that the draincocks are closed on the engine block and radiator. Refill the engine with coolant. Reconnect the negative battery cable. Start the engine and check for leaks.

Jul 20, 2010 | 1993 Toyota Corolla

2 Answers

My 93 buick regal custom 3.8l has a bad ac pump and makes an aweful noise when running. The ac doesnt work and the 'clutch' on the pump spins freely, is this an easy fix or do i need a new ac pump?


you would need a new a/c pump, however you you didnt want to replace it and could live with out the a/c, a cheaper option is to replace the belt and bypass the a/c. Most auto parts store will sell you a belt of the correct dimensions if you tell them you wish to bypass the a/c. I've done this for many customers. It can be done on just about any motor.

Best of Luck.....

Mar 24, 2010 | 1992 Buick Regal

1 Answer

1993 Toyota Corolla revs high and will stay that


Automatic choke stuck on.Replace it the car is running to ritch.

Jul 17, 2009 | 1993 Toyota Corolla

1 Answer

How do you replace the ac magnetic clutch on a 2005 corolla


Sounds like your A/C compressor coil is bad.I would suggest replacing clutch disc,pulley and coil or you can put a complete compressor assy. on which is a little more expensive.

Jul 05, 2009 | 2005 Toyota Corolla

2 Answers

Toyota AE101L Corolla 1.5


I need a service manual.

Jun 17, 2008 | 1993 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...