Question about 2006 Fiat Grande Punto

Open Question

REMOVING DOOR TRIM FROM FIAT GRANDE PUNTO - 2006 Fiat Grande Punto

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1986 Answers

SOURCE: fitting a wing mirror on the passenger side of a fiat punto

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Ad
bunnydawg
  • 5158 Answers

SOURCE: Fiat Punto indicators

you need to change the flasher unit .... also check fuse # 24 on the fuse panel inside the vehicle. the flasher unit should be just under the dash on the steering wheel side... i have alot of information on that vehicle but i couldn't find where exactly the flasher unit is located.

Robert

Posted on Feb 17, 2009

  • 51 Answers

SOURCE: fiat punto acceleration problems

nikki,

I had a similar problem with a 98 sporting. It turned out to be firstly the clutch had worn down to almost nothing and the fuel filter hadn't been changed in a good while so it got clogged. I would do the filter first. (located just under the drivers side near the rear wheel.

Posted on Apr 27, 2009

  • 1 Answer

SOURCE: which fuse is it for indicators on fiat punto

1998 on an R reg

Posted on Nov 19, 2009

doreencostel
  • 1 Answer

SOURCE: how do i replace a headlight on a fiat punto

how to change headlight for fiat punto 2000

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Punto central locking works on three doors but not on nearside rear,any ideas?


There is a solenoid inside the door which has almost certainly failed. Once you've removed the door card / trim and the insulating plastic sheet, you will see a black box which is connected to a rod which operates the lock. This box is the solenoid. They are cheap to buy - new or used - and straightforward to change once you've removed the door trim.

Sep 24, 2014 | Fiat Punto Cars & Trucks

1 Answer

Glove box fuse box diagram for fiat punto grande 06


On this website (link below) you find fuse box diagram and description for Fiat Grande Punto

Fiat Grande Punto 2006 2012 fuse box diagram Auto Genius

Feb 04, 2014 | 2006 Fiat Grande Punto

1 Answer

Where is the fuse for the cigar heater on fiat punto2007


On the front Passenger site if I am correct, if you open the door on the side of the dashboard should be a little flap that you can open. There is the fusebox with the Cigarette Lighter Fuse.
If I am wrong it should else be located on the right side under the steering wheel.

Feb 28, 2013 | 2007 Fiat Grande Punto

1 Answer

How do you remove the passenger side rear door panel in a 2006 Fiat Punto


1 Prise out the trim cap and undo the screw securing the exterior mirror inner trim panel of door
2 Where a manually-adjustable exterior mirror is fitted, prise the rubber cover off the adjustment lever, then unscrew and remove the locking collar using pointed-nose pliers.
3 Pull the panel from its location to disengage the retaining clips. Disconnect the loudspeaker wiring connector and remove the panel.
4 Lift off the trim caps, undo the retaining screws, then remove the door interior handle surround.
5 Carefully prise off the loudspeaker grille then undo the three loudspeaker retaining screws. Withdraw the speaker from the door and disconnect the wiring connectors.
6 Undo the three retaining screws in the loudspeaker aperture, and the single screw in the oddments pocket just below the aperture.
7 Lift out the loudspeaker protective cover and withdraw the loudspeaker wiring from the base of the cover.
8 Prise out the trim cap and undo the screw securing the rear of the trim panel to the door frame of Fiat Punto car.
9 Undo the screw at the upper front corner of the panel, and the remaining four screws securing the lower edge of the panel to the door frame.
10 Using a suitable forked tool inserted between the door and the trim panel of Fiat Punto, release the press-stud clips located around the edge of the panel, then lift the trim panel upward.
11 Pull the panel from the door, noting that the lower window aperture weatherstrip is integral with the trim panel and must be released from tie door as the panel is withdrawn.
12 If work is to be carried out on the door internal components, it will be necessary to remove the plastic sealing sheet from the inside of the door. Start at one comer of the sheet and carefully peel it away, using a sharp blade to split the sealant bead, if necessary.
13 Store the detached sealing sheet such that it cannot become contaminated with dust; this will allow it to be re-used later.
Source (with illustrations) - Door inner trim panel removal and refitting FIAT Punto
11_26_2014_6_35_50_pm.jpg

Feb 22, 2013 | Fiat Grande Cars & Trucks

1 Answer

Replacing electric wing-mirror


remove the interior trim cover and three torq headed screws ,simple job

Feb 12, 2013 | 2007 Fiat Grande Punto

1 Answer

We're is the fuse for fan speed on fiat punto grande 06


go to auto shop and look at their chillton manual on it or find your fuse box it may tell you.

Jan 08, 2013 | 2006 Fiat Grande Punto

1 Answer

Where's the AUX port located in a fiat punto


It's located in the glove box, on the top right hand side.

Apr 14, 2012 | 2006 Fiat Grande Punto

2 Answers

Fitting a wing mirror on the passenger side of a fiat punto


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 18, 2009 | 2006 Fiat 124

Not finding what you are looking for?
2006 Fiat Grande Punto Logo

Related Topics:

1,704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...