Question about 1999 Suzuki Grand Vitara

Open Question

2002 suzuki grand vitara maf sensor located - 1999 Suzuki Grand Vitara

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Yazz226
  • 497 Answers

SOURCE: suzuki grand vitara 2.0 TDI

check ignition system, clean fuel system, check all sensors
hope this helps

Thanks for using Fixya

Posted on Jul 15, 2008

Ad
  • 1 Answer

SOURCE: cabin filter element location

Filter is located behind the glove box. All you need is a screwdriver to replace.

1. Open the glove box and empty to take the weight off the box.

2. On the right side there is a plastic hinge like device held on by one Phillips head screw. If you have trouble removing with a Phillips screwdriver you can remove with a narrow flat head screwdriver. Remove the screw and slide hinge off the mount.

3. To drop the glove box press the sides slightly inwards while 'forcing' it open beyond it's normal stopping point. Careful as when it releases it will fall wide open and may even fall from its hinged area. Set it aside.

4. Behind the glove box there is probably some fiberous material inserted to prevent noise like squeaking when it rubs. It is sticky on one side to hold it in place. Just remove and place out of the way.

5. Behind the fiberous material there'll be a cover which kinda looks like a grille. Mine was white and it is in the center of the opening. Remove it by releasing the clips at the left or right. It comes right out.

6. When the cover comes off slide the filter out and replace it. The filter lays flat and just slides in and out easily. However, if it has been some time since you replaced be prepared for a lot of debris on top of the filter such as leaves, grass or other general type of debris that has been sucked into the filter. It also may be the source of any bad odors that you smell through the air conditioning system.

7. Reverse the process. Replace the cover and push the glove box lid back into place. When you replace the glove box be careful to make sure the hinge you initiallly removed the screw from is not left behind the glove box or you will have to remove again to get it out. Replace the screw and do not over tighten as it screws into plastic and then your done.

Posted on May 07, 2009

  • 510 Answers

SOURCE: central locking fob

Programming
When
Remote control buttons operated repeatedly while vehicle out of range and system becomes inoperative. System malfunction.
How
Ensure ignition switched OFF and all doors closed. Proceed as follows: Within 10 seconds, open driver's door and switch ignition ON. Within 10 seconds of switching ignition ON, switch ignition OFF. Within 20 seconds of switching ignition OFF, press and release driver's door contact switch 3 times. Within 10 seconds of releasing driver's door contact switch, switch ignition ON then OFF. Within 20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door locking/unlocking, press remote control lock button Fig. 1 [1] or unlock button [2]. Programming procedure complete. Confirm programming has been successful by locking and unlocking vehicle.
NOTE: A maximum of 2 remote controls can be programmed.

Posted on Feb 06, 2010

ZJLimited
  • 17970 Answers

SOURCE: How to change the fuel filter on a suzuki grand Vitara

Fuel FIlter - Removal

  1. Relieve fuel system pressure.
  2. Remove or disconnect the following:
    Negative battery cable Fuel lines from the fuel filter Fuel filter
To install:
  1. Install or connect the following:
    Fuel filter and tighten the bracket bolt. Note the fuel flow directional arrow. Fuel lines to the fuel filter. Negative battery cable
  2. Start the engine and inspect the fuel filter connections for leaks.

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Fuel lines from the fuel filter Fuel filter
To install:
  1. Install or connect the following:
    Fuel filter and tighten the bracket bolt. Note the fuel flow directional arrow. Fuel lines to the fuel filter. Negative battery cable
  2. Start the engine and inspect the fuel filter connections for leaks.
Fuel filter is incorporated in fuel pump assembly in fuel tank.

Hope this help.

Posted on May 15, 2010

  • 5 Answers

SOURCE: Suzuki Vitara V6, MAF sensor, white smoke.

i have a simialer problem but i was getting neat fuel out the exhaust as well . i removed the engine because id got a replacement then stripped the old one and as i thought it was a valve timing problem.looking at the engine from the front the cams on the left bank had jumped one tooth out of time so fuel was not being burnt and coming straight through the exhaust.strangely it didnt seem to have a big missfire and idling and smoke got worse when warm.

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clean the MAF sensor Suzuki Grand Vitara 2003?


Small cans of MAF cleaner spray-even Walmart carries them. Basically a sensor-safe cleaner in a small spray can, just spray it directly on the sensor-after it is removed from its position in the air stream, of course-and let it dry thoroughly before re-installing it. Never touch or try to wipe the very fragile wires. They will not take it well, and the car will run very rough from then on. That is what happens when a bad MAF sensor is put on. I know from experience.

Jul 27, 2017 | Suzuki Cars & Trucks

1 Answer

Where is knock sensor on 2002 suzuki vitara jls 4 door 5 speed manual


IGNITION KNOCK (DETONATION) SENSOR the knock sensor Is on the back of engine (driver side on LHD vehicles) under the cam position sensor. it is a giant PITA to change. i had to cut a wrench in half (7/8 i think??) and use a pry bar to break loose the sensor..
((found this info from a Suzuki forum.))

So how bout that knock sensor Suzuki Forums Suzuki Forum Site

Ignition Knock Detonation Sensor fits 1999 2009 Suzuki Vitara XL 7 Aerio

http://www.autopartswarehouse.com/shop_parts/knock_sensor/suzuki/vitara.html

P0325 Knock Sensor Diagnosis EricTheCarGuy

Feb 04, 2016 | 2002 Suzuki Vitara

2 Answers

Where can we find diagnostic socket?


OBD2 connector location in Suzuki Grand Vitara (1997 - 2005)

www.outilsobdfacile.com/...plug-connector-obd/Suzuki-grand-vitara-2
Easily find where your OBD2 port / connector is located in Suzuki Grand Vitara (1997 - 2005) ... OBD connector location for Suzuki Grand Vitara (1997 - 2005).

Suzuki Engines Diagnostic Connectors

codes.rennacs.com/Petrol-Engine/Japanese-Korean/Suzuki-Engines.php
Suzuki Engines - diagnostic connector locations, with detailed diagrams, text, and pictures of where to find the diagnostic connector in the vehicle.

Oct 14, 2015 | 1999 Suzuki Vitara

1 Answer

I need a diagram for engine timing on a 2.5 liter suzuki grand vitara 2002


you mean the firing order ...... for the drivers side its 135
the passengers side 246

Sep 09, 2014 | 2002 Suzuki Grand Vitara

1 Answer

Car konks out and check engine light come on.


The check engine light is because all check engine light codes are caused by components that affect emissions. It's not actually an engine problem, it's a problem with either your O2 sensor, MAF sensor, fuel/air ratio, pyrometer, or exhaust.

obd2 scanner

Aug 15, 2012 | 2002 Suzuki Grand Vitara

1 Answer

I just bought a 2000 Grand Vitara and I noticed when in drive at a stop the engine revs up a little then normal, back up and down.


Hello and welcome to FixYa!

As a first course of action, please do check the vacuum hoses. If there are disconnected or worn out vacuum hoses the car's idle becomes unusual. One good reason why it goes up a little when braking.

Another cause will be the MAF (mass air flow) sensor. If the MAF sensor is fault, the car's idle becomes erratic. Your MAF sensor may be near it's break point so be ready for a possible replacement soon.

Hope this helps and thank you for using FixYa! Have a good one!

May 09, 2011 | 2000 Suzuki Grand Vitara

1 Answer

Machine is throwing a MAF sensor i am told my doesnot have one, doing research on my own. the symptoms match a throttle position sensor.


the grand vitara maf sensor is usually located in the intake air duct, from air filter to throttle body. mounted on the intake manifold. some maf sensors are mounted directly to throttle body. symtoms of a bad tps are---it will cause tranny shift issues, bucking, jerking, idle surging, engine cut off, hesitation on take off, surge while cruising down highway. have a good day !!

Dec 28, 2010 | 2002 Suzuki Grand Vitara

1 Answer

2002 Grand Vitara engine light


Try these easy things...take off clean and reconnect the battery cables, take to Auto Zone for a FREE computer hook up. More than likely if the battery hook up doesn't work it's the oxygen sensor.

Jun 29, 2009 | 2001 Suzuki Grand Vitara

Not finding what you are looking for?
1999 Suzuki Grand Vitara Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...