Question about Cars & Trucks

Open Question

Chev aveo key stuck in ignition - Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: chev. aveo 2006

I contacted a chevy dealer and though there is not an actual recall on this at this time it is a common problem and they will fix it free.

Posted on Jun 04, 2008

  • 158 Answers

SOURCE: ignition key is stuck trucks

Try wiggling the steering wheel back and forth while turning the key off.

Posted on Feb 26, 2011

johnf1aresti
  • 1098 Answers

SOURCE: remove stuck ket from ignition on 2005 chev blazer

the problem is not in the ignition it is mostly on the gear selector knob. Might show that it is in Parking position and is not completely in.Push with your hand further in Parking and try to remove the key.If no success the ask from an expert to check it.

Posted on Sep 09, 2012

alicantecoli
  • 22156 Answers

SOURCE: how do I change an

Now if you mean the barrell then what you do is insert key and turn to acc position and then look around the lock and you will see a hole and into this hole you push a small nail to push the pin down and then pull teh key gently and the barrell will come out.make sure the steering lock mechanism doesnt drop or you are in the proverbial.if you have lost the key then its down to cutting the whole lock off as you cannot get a drill to drill the spring loaded pin out .make sure you remove the transponder ring before you do anything though and if you replace the barrell or the complete lock you will need a autolocksmith to reprogramme the keys for you ,or remove the chipfrom the old key and put it in the new one and the spare as well or vehicle will not start ,and make sure you remove the transponder ring i know i have already written that but i cannot over emphasize this enough ,if you have lost the keys and no spare then its easier to wait for a new key from dealer

Posted on Aug 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The immobiliser for my Chev Aveo has been activated & I dont I don't know how to bypass it.How can I deactivate/bypass the immobiliser. Im stuck and have no money to pay auto-electricians.


If the battery is dead in the key fob then the following will help you
1. Remove the screw from the back of the cover and open the cover of the transmitter.
2. Pull the transmitter out of the cover and carefully detatch the sticker from the unit.
3. Remove the battery and replace it with the new one. Make sure the positive side of the battery faces up. Use one three-volt, CR1620 or the equivalent.
4. Attatch the sticker and put the transmitter unit in the cover.
5. Put the two halves back together and replace the screw. Make sure the cover is on tightly, so water will not get in.
6. Test the transmitter operation.

Aug 05, 2016 | 2007 Chevrolet Aveo Sedan

1 Answer

My 2010 Chevy aveo is stuck on neutral and key is stuck it goes down to drive but not up towards reverse or park Please help


theirs a push pin opening under steering column by ignition that will allow you to turn key to off and remove it the reverse lock out tab on your selector either broke or something like a coin is jammed in it most of time a coin is jammed there

Jul 11, 2016 | 2010 Chevrolet Aveo

1 Answer

Why is the key stuck in the ignition of my 2009 Chevrolete Aveo?


is the indicator in the park position really in park ? was the replacement cylinder installed properly? could it be hanging up on locking in steering collum .? try moving steering wheel hard left and right while trying it remove key.

Feb 26, 2015 | 2009 Chevrolet Aveo

1 Answer

Firing diagram for 06 chev aveo


there is no firing diagram on an 06 aveo this has electronic ignition which is controlled by the computer. if your car is running bad take it to a certified tech or to your local dealership and have it looked at.

Sep 29, 2014 | 2006 Chevrolet Aveo

1 Answer

Chevy aveo 2005 key stuck in egnition


Call locksmith or remove ignition switch and replace with new.

Aug 30, 2014 | 2005 Chevrolet Aveo

1 Answer

My 2007 chev aveo wont start and cant move gear shift


most cars the brake light switch has to work properly for it to come out of gear and start properly. check this switch! Also First check to see if you have brake lights (if not the switch may have failed) secondly when with the ignition key on when you press the brake pedal do you hear a click from the area of the gear shift lever each time you press the brake pedal? If not the control module, wiring or solenoid may have a problem. First check all your fuses! Hope this helps, Good-Day!

Jul 27, 2014 | 2007 Chevrolet Aveo Sedan

1 Answer

What torque spec for chev aveo 2004 cylinder head


18 lb ft+60°+60°+60°+10°

NEW HEAD BOLTS ARE REQUIRED WHEN REPLACING THE HEAD OR HEAD GASKET.

Jul 04, 2009 | 2004 Chevrolet Aveo

2 Answers

Chev. aveo 2006


Is your car in PARK?

May 14, 2008 | 2006 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...