Question about 2001 Chevrolet Tracker

Open Question

2001 chevy tracker 4 wheel drive transfer case switch failure front drive does not engage

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

psds4
  • 293 Answers

SOURCE: 1999 chevy tracker 2.0 engine

check the front acuator hooked up at front axle

Posted on Sep 22, 2008

  • 9 Answers

SOURCE: 4 wheel drive on 1999 chevy blazer

99 chev blazer should have an electric motor not a vac switch...Is your controll on the dash a switch you turn.. or on the floor you shift ??

Posted on Jan 07, 2009

  • 6982 Answers

SOURCE: 99 Silverado 4-wheel drive not engaging

It does not seem that sufficient diagnosis was done. No, you cant give a specific diagnosis like that without tearing unit down. It's likely that they told you the most common failure and left it at that. Likely there is a problem with your unit...I think this becomes more of a trust issue than a mechanical one. A second opinion from an independent reputable shop may help but either way, you need to have it fixed. In not using it much, it makes me wonder how it got worn.
good luck

Posted on Mar 19, 2009

cincinaty5
  • 132 Answers

SOURCE: 1993 chevy 1500 4x4 pickup no power to front actuator

check all wire conections also replace the actuator on the front axle but check for power there first if you have power replace that switch as well .

Posted on Aug 27, 2009

  • 1 Answer

SOURCE: 1990 Chevy 1500 4x4 won't engage 4 wheel drive

the 4x4 do not engage in my1990 chevy pick up what i need to check

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there an electric or vacuum switch on a 2001 chevy blazer


There are 2 models here the push button will flash if the system is not engaging or disengaging properly . If front drive shaft is turning. That is with car raised and supported . if front drive axles do not turn then the axle actuator is not engaging axle shaft passenger side. Remove actuator and manually engage shifting collar with a screwdriver still does not turn then inner axle is twisted.

Mar 21, 2014 | 2001 Jeep Grand Cherokee

1 Answer

2001 s10 4wd dosen't engage


Check actuator under battery to see if it moves when you put in 4 wheel drive.This has an arm on it which pulls a cable in on front diff.sometimes the actuator boot will tear as it is like a rubber boot.

Dec 21, 2009 | 2001 Chevrolet S-10

2 Answers

1998 Chevy S10 front axle will not engage when put into 4 wheel


Normal thing that happens as long as onone (worked) on it, is the vacume hose going to the engage sevevo under the battery box has fell of on either end or is brocken on the way there. Then the once or now leaky battery acid ate up this same servo. then the cable going to the front axel breaks sticks falls off or even someone needing one climbed under your truck while parked somewhere to get one to replace their brokeen one now you don't have one then theaxel engage arm or gearset is damaged

Aug 16, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Chevy pickup 4-wheel drive won't engage


Replace the push button selector assembly. Common failures. If that isnt the problem then the encoder motor on transfer case has failed. Try switch first.

Mar 29, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

99 Silverado 4-wheel drive not engaging


It does not seem that sufficient diagnosis was done. No, you cant give a specific diagnosis like that without tearing unit down. It's likely that they told you the most common failure and left it at that. Likely there is a problem with your unit...I think this becomes more of a trust issue than a mechanical one. A second opinion from an independent reputable shop may help but either way, you need to have it fixed. In not using it much, it makes me wonder how it got worn.
good luck

Mar 19, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Chevy s10 4 wheel drive will not engage


There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.

Dec 08, 2008 | 1991 Chevrolet S-10

1 Answer

1999 Chevy 4x4 engaging


Check the solenoid at the front axel. This is a rather common prob. First check that power is at the axel, got power, clean and put it back. Please do not even look at the tranfer case! At worst you may need to replace the axel solenoid! Frankster016

Nov 22, 2008 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
2001 Chevrolet Tracker Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...