- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls and the mirror. Then you can access the bolts securing the mirror onto the door....
i would check the switch first and also the passenger side door jamb wire harness also i know it sounds simple but ALWAYS check ALL of you fuses before beginning any electrical fault tracing, try removing the switch and identify which wire powers the mirror and manually jump power with a paper clip to the mirror in question there should only be three wires one will have power and the others will be left and right mirror retraction if this works your switch is bad if not go to the mirror and power that manually and if no dice you got a bad motor -jeff