Question about 2005 Toyota LandCruiser Prado

Open Question

3rd row 2005 prado seats won't lock into floor, have not been used since new

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: 2004 toyota highlander -

Most dealers will not perform this service, as they become the "final stage manufacturer", and what that means is THEY would be responsible for any claims (liability) that may arise from an accident. Toyota does NOT recommend adding seats, nor do they recommend changing seat types (buckets vs bench). Note that the vehicle is designed with the specific seating positions in mind. To add a 3rd row seat, you would also have to install the proper seatbelts, and secure the 3rd row seats in a fashion that meets NHTSA specifications.
In short, and I apologize for this, please refrain from doing it.

Posted on Sep 25, 2008

Ad
  • 34 Answers

SOURCE: can't reinstall 3rd row seat 98 toyota sienna

These seats are hard to get in and out, especially if the receiver hook on the floor has any obstruction; so first thing is to clear out anything that may be interfering with the seat from properly seating in the front hooks.

This fix applies to seats that are stuck and won't come out as well as seats that won't go back in.

Each seat has two levers on their back, marked; one for 'tumble' and the other for remove. Problem is, if you press the 'tumble' lever when the seat is out it may not let you replace the seat without first holding BOTH levers up while pushing the seat back into place, then pushing the seat DOWNWARD to reset the mechanism for tumble. Then, push the seat down so that the locking mechanism for tumble (a black lever under and on the drivers side of the seat).

If the receiver hooks are clear and the seat retainer mechanism is properly set you will be able to push the seat in and press down on the back of the seat and hear a very satisfying thunk that lets you know the seat is properly locked in.

These seats can handle quite a bit of shoving and jamming, and you may just have to work it hard to get them back into place.

Posted on Aug 11, 2009

flores136959
  • 215 Answers

SOURCE: My 2008 Toyota Rav4 rear seat (3rd row) has 2

replace the whole seat.

Posted on Jan 18, 2011

saailer
  • 1868 Answers

SOURCE: Prado Tailgate or (Rear door) doesn't lock

Hello! There is a 4 pin connector that plugs into the tailgate with colors; Gray/Blue (pin4)...White/Black (pin1)...Blue/Black (pin3)...And Blue/White (pin 2)...Pins 2 & 3 are the motor that operates the tailgate...pins 1 & 4 are the switch contacts with pin 1 (White/Black wire tied to chassis ground)...When you press your remote Ground should be on pin #4...Check the plug to see if it is properly connected also inspect for loose or broken wires....If all looks good open the left kick panel and switch relays "L" and "U" and see if the problem occurs on a different door...If it does Relay "L" is the culprit...Replace relay...Guru...saailer

Posted on Apr 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove center seat belt in second row 2005 Cadillac srx


Remove the rear lower seat. Remove bolts holding belts to floor pan of vehicle.

Mar 06, 2015 | 2005 Cadillac SRX

1 Answer

The 3rd row suburban chevy 2003 not lock into floor


take it to the dealer before someone gets hurt...

Dec 30, 2013 | 2007 GMC Yukon

1 Answer

Why is there no power to third row seat?


Power 3RD Row Seat Problems and Tranny Shutter - Ford Truck ...

www.ford-trucks.com > ... > Expedition & Navigator
Mar 27, 2014 - Expedition & Navigator 1997 - 2002 and 2003 - 2006 Ford Expedition andLincoln Navigator SPONSORED BY: ... First the 3RD row seats won't fold down, noclicking, no sounds, nothing. I the fuses are good and there is power at the fuse box, but no power at the motors or switches. Based on continuity ...

3rd row powerfold seat stuck down - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > 2007 - 2014 Expedition & Navigator
Mar 14, 2010 - 3rd row powerfold seat stuck down 2007 - 2014 Expedition ... 2010, 2011, 2012, 2013 and 2014 Ford Expedition and Lincoln Navigator ... I also tried lifting the seat while my wife was pushing the button to raise it, to no effect. There is defnitelypower going to the motor but it just isn't ... Join Date: Feb 2005.

No power to third row seat on 2005 lincoln navigator - Fixya

www.fixya.com/cars/t12295627-no_power_third_row_seat_2005_lincoln
Apr 4, 2012 - no power to third row seat on 2005 lincoln navigator third row seat is ... U will have to replace the entire power seat transmission, there is no ...

Lincoln Navigator Review - Edmunds.com



Apr 04, 2012 | 2005 Lincoln Navigator

2 Answers

2004 3rd row rear seat won't fold down using lever


Cable is broken or stretched. pick up the bottom seat and see the cable end if broken or slack from being stretched pull that cable and then the back should fold down. Ibelieve you will need to remove seat to repair the cable. the bottom seat when lifted pulls on a cable that releases the backs lock to fold down

Jun 11, 2011 | 2004 Chevrolet Suburban

2 Answers

My honda odyssey touring does not have a spare tire. We bought this as a brand new car. The first time i had a flat tire we checked everywhere in the car even with AAA service help and we were not able to...


2005 Honda Odyssey TOURING models originally came with Michelin PAX run-flats and eliminated the traditional dough-nut spare. If your van no longer has run-flats (look at the tire size) then your van has already been De-PAX'd...count your lucky stars because PAX tires run about 300 a tire plus!!! If you have been De-PAX'd then you will need a donut spare (T135/80D17) this goes into the spare tire space located behind the 3rd row of seats. this Site has everything you will need for the spare http://www.hondapartworld.com/1534_SPARE-SHJ

Mar 23, 2011 | 2006 Honda Odyssey

1 Answer

There is no power going to my 2005 MDX trailer hitch plug. The manual does not say if there is a fuse for a trailer hitch or not. Someone help


There are two 7.5A fuses in-line located under the left 3rd row seat.
The exact location is behind the seat, below the floor between the seat and the storage compartment. Easier access if you remove the compartment lid.

Aug 02, 2010 | 2005 Acura MDX

1 Answer

I want 3rd row seats.


As a Auto body tech. Yes it is possible. It will take alot of work. You have a few ways to do this but it will take alot of modification. Find a third row seat and take it to a welding shop or apolestry shop and have a bracket built to bolt the seat down to the floor. Then take it to a body shop and have them drill the floor and install the seat. Or if you wish to tackle this on your own Good luck.

Jul 30, 2009 | 2006 Chevrolet Trailblazer

1 Answer

'07 Chevy Tahoe 3rd Row seat will not fold down


I have had this problem, and I am having it again. The problem is if a little trash gets under the bar in the floor, it will keep the mechanism from locking completely. I had tried everything. The only solution so far is the rock back and forth. Real pain. I am trying to find a secret release.

Apr 29, 2009 | 2007 Chevrolet Tahoe

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

2 Answers

Need to remove backseat


You can not remove the far back seat, only the middle one. But you can slide it all the way foward. I have had my van for two years and just learned how to do it today from my husband. Below the rear are two levers. A and B. Make sure the back of the seat is in the upright position and then pull on Levee A. At the same time, lift of the bottom of the seat. It will go up and fold together making a V with the back of the seat. Then pull lever B and slide seat forward.

Jun 23, 2008 | 1993 Nissan Quest

Not finding what you are looking for?
2005 Toyota LandCruiser Prado Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...