Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1. drain coolant from radiator
2. unbolt and remove the water neck from the engine block (it's attached to the upper radiator hose) and scrape any leftover gasket material off of the mating surface w/ a razor or gasket scraper, being careful not to actually gouge the metal
3. pull thermostat out of engine block (it's easy to see w/ the water neck off)
4. scrape any gasket material off mating surface on engine side, being even more careful not to gouge the metal here
5. place new t-stat on engine side opening
6. place gasket over the thermostat (you can put a thin bead of RTV sealant on both sides of the gasket if you wish, some people think it's overkill, but i hate doing things twice)
7. replace water neck
8. refill cooling system, use the little brass bleeder screw on top of the motor to bleed out the air until a steady stream of coolant is coming out after the engine is warmed up. close the screw.
Posted on Sep 29, 2009
Tips for a great answer:
Dec 25, 2017 | Cars & Trucks
Nov 13, 2016 | 1993 Chevrolet Corsica
Feb 25, 2016 | Pontiac Cars & Trucks
Dec 30, 2015 | Pontiac Cars & Trucks
Mar 07, 2015 | 1994 Chevrolet Corsica
Dec 03, 2011 | 1994 Chevrolet Corsica
Dec 01, 2010 | 1994 Chevrolet Corsica
Oct 10, 2010 | 1994 Oldsmobile Achieva Special Edition
Jun 30, 2010 | 1994 Chevrolet Corsica
79 people viewed this question
Usually answered in minutes!