Question about 2002 Chevrolet TrailBlazer

Open Question

How i reset a security system on a 02 chevy trail blazer

It wont start

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 71 Answers

SOURCE: Reset the security system after installing a swicth 2001chevy Impala

did you change the key? if you have it more than likely needs programmed as most of the gm's have either a resister based immobilizer or a passlock system. If its the same key check that you have all the connecters back at steering column as you may have disturbed the vat's one.

Posted on Nov 27, 2008

Ad
tripletauto
  • 1450 Answers

SOURCE: 2005 CHEVY +TRAIL BLAZER ABS AND BRAKE LIGHTS ON

if chains caused problem and you have driven with them off light would have gone out once it saw everything working properly. look at sensors might have pulled a wire loose with chains. the abs system runs a self test everytime you start vehicle if it sees a history code from last time it will leave light on and look to see if that problem still exists and 99% of the time it will cut light off . but need to have scanned and checked out

Posted on Dec 29, 2008

ewashmidas
  • 362 Answers

SOURCE: 2005 CHEVY +TRAIL BLAZER ABS AND BRAKE LIGHTS ON

When the ABS light is on when driving there is a problem in the anti lock brake system and you will need to have it tested to find out what the problem is. As long as the light is on the ABS has been shut off by the computer until it is repaired. There could be problems with one of the wheel speed sensors, wiring or the ABS pump. On some vehicles the red brake light will come on too.

Posted on Jan 28, 2009

Molson02536
  • 3854 Answers

SOURCE: M y radio stopped working on my 2004 trail blazer

The 2004 Trailblazer has two fuse panels, one in the under hood and one under the middle row seats. The radio fuse is marked RADIO fuse # 41 and is a 15 amp fuse located in the rear fuse panel. To access the rear fuse panel flip the seat behind the driver to the upright position, under it you can see the fuse panel and a diagram should be on the under side of the cover. 

Good luck and hope this helps.

Posted on May 26, 2009

  • 335 Answers

SOURCE: How to do I reset

there is no light for emissions testing on this vehicle. there is a ses light that can come on, indicationg a problem with the engine or transmission electronic system. this will require a scan tool to pull trouble codes. there is another light called oil life monitoring that needs to be reset after oil changes, which I suspect is what you are seeing. here is a picture of the light and the instructions for resetting.,

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL SOON message being turned on, reset the system.
After changing the engine oil, the system must be reset as follows:

  1. Turn the ignition to RUN, with the engine OFF.
  2. Press the information and reset buttons on the Driver Information Center (DIC) at the same time to enter the personalization menu.
  3. Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL LIFE RESET.
  4. Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
  5. Turn the key to LOCK.
If the CHANGE ENGINE OIL message comes back on when you start the vehicle, the Engine Oil Life System has not reset. Repeat the reset procedure.



485d3b2.gif

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my alarm reset in my 1998 chevy blazer the security system is killing the fuel and i cant get it to run it starts and dies imeaditly


I don't think the anti-theft is the problem.
On GM vehicles, the anti-theft system will not allow the engine to crank, or get fuel or spark. If it cranks, you have a different problem.

Nov 16, 2015 | Cars & Trucks

1 Answer

How to reset change oil light on a 02 trail blazer lt


To reset the change oil light, do the following:

  1. Turn the ignition key to run with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds.
  3. If the CHANGE ENG OIL light flashes for five seconds, the system is reset. If the light does not flash, repeat procedure.

Nov 19, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

2007 chevy trail blazer low beam lights wont work.


maybe a fuse the fuse box is under the drivers side passenger seat . sometimes ive seem them get something spilled on them and i had to wiggle the fuses to clear the corrosion

Mar 16, 2010 | 2007 Chevrolet TrailBlazer SS

1 Answer

Where is the fuel filter located on my 2004 Chevy Trail Blazer? WE


On 05+ Trail Blazer, the fuel filter is integral with the fuel pump inside of the fuel tank. It is a non-serviceable part. On 02-04s, the filter is on the drivers side frame rail at about the B-pillar. If your trail Blazer is a late 04 which means that it was build close to the 05 Trail Blazer, you may have a non serviceable fuel filter. Good luck and check under your Trail Blazer or look at your manufactured date sticker on the door which would help you indicate if your 04 is a early Trail Blazer and you'll have the fuel filter on the inside frame rail under the driver's door.

Mar 05, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

2005 CHEVY +TRAIL BLAZER ABS AND BRAKE LIGHTS ON


if chains caused problem and you have driven with them off light would have gone out once it saw everything working properly. look at sensors might have pulled a wire loose with chains. the abs system runs a self test everytime you start vehicle if it sees a history code from last time it will leave light on and look to see if that problem still exists and 99% of the time it will cut light off . but need to have scanned and checked out

Dec 29, 2008 | 2005 Chevrolet TrailBlazer

2 Answers

2002 Chevy Blazer


take the pos cable off leave it off for a bit and see if it wont reset

Aug 20, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...