Question about 2003 Mazda Mazda6

Open Question

04 mazda 6 clutch cylinder diagram - 2003 Mazda Mazda6

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 166 Answers

SOURCE: mazda rx 7 rebuilt kit clutch master cylinder.

crack the bleeder nipple on the slave cyl and get some one to slowly push the pedal see if any fluid shoots out if not you may have killed the new seal in the master cyl.
it sounds like you did every thing right its just that old cylinders get were in them and if you don't hone them out and put a new sleeve in them quite often you will rip the new seal apart on the first pump of the pedal.
any way check for presser and let me no

Posted on Dec 21, 2008

  • 1 Answer

SOURCE: 2004 mazda 6 starter

the starter is located on top of the engine, underneath the battery and battery tray. they must be removed to gain access to the starter

Posted on Feb 08, 2009

bschilz
  • 2049 Answers

SOURCE: serpentine belt diagram mazda 6 2005

Here are links to the diagram...

If your engine is the 2.3L 4 cyl... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7042

If your engine is the 3.0L V6... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6036

Posted on Sep 01, 2009

roniecon
  • 6826 Answers

SOURCE: engine misfire

It sounds like the coil is going out on that cylinder,but replace the boot with the coil.It would not hurt to use a injector cleaner first,Lucas is the best.

Posted on Jan 26, 2010

Testimonial: "thanx for the promt response and helping me pinpoint the problem"

maine_wolf1
  • 4 Answers

SOURCE: looking for a belt diagram for a 2002 Mazda 626 - 6 cylinder

The best place for a diagram is either in a parts store where they sell books on vehicles or try searching the web and maybe someone will have a book you could borrow. Maybe even a garage will have the diagram but most usually it SHOULD be in the vehicle manual that comes withteh vehicle when you buy it.

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mazda 6 Sport 2009 and after about 15 mins driving I get a squeaking noise from the engine compartment every time I press the clutch. Anybody any ideas?


Throw-out bearing, clutch slave cylinder, clutch master cylinder, an angry mouse (probably not). Start with the first three. First, though, I would find an assistant who could help you narrow down where exactly the squeaking is coming from. One person presses on the clutch while the other listens in the engine compartment.

Jan 12, 2016 | Mazda Cars & Trucks

1 Answer

PLZ I NEED FOR A 04 MAZDA MAZDA 6 V6 THE SERPENTINE BELT DIAGRAM THANK YOU SOO MUCH FOR UR HELP !!!


Hello ezzywaylogis,

Below is a diagram of the belt routing.

netvan_209.png

I hope this helps.

Regards,

Jerry

Aug 28, 2011 | 2004 Mazda 6

1 Answer

Firing order for 2005 mazda6


This model used 2 engines, a 6 cylinder and a 4 cylinder, here are both.
4 cylinder firing order is 1-3-4-2
Here is the diagram:

emissionwiz_21.gif


Here is the 6 cylinder firing order 1-4-2-5-3-6
Here is the diagram:





emissionwiz_22.gif

Jan 04, 2011 | Mazda MAZDA6 Cars & Trucks

1 Answer

How long to replace clutch in a 1998 mazda 626


For a 4 cylinder 2.0L engine flag time to remove and replace clutch 5.4hrs.

For a 6 cylinder 2.5L engine flag time to remove and replace clutch
6.3 hrs.

hope this was helpful for you.

Sep 09, 2010 | 1995 Mazda 626

1 Answer

Where do we find the place to put the clutch/gear fluid for a manual transmission for my mazda mx-6 1993.


The clutch on mazda cars shares the same fluid reservoir as the brakes. Bleeding the clutch is just like the brakes. The clutch slave cylinder is on the front side of the transaxle. You can find it by following the line from the master cylinder that does not go to the ABS unit/brakes. bleed just like brakes, you have to pump cl utch to get are out of it.

Jul 14, 2010 | 1993 Mazda MX-6

2 Answers

I need a diagram of the firing order 2003 Mazda MPV.Misfire on cylinder 2.


For the 2003 Mazda MPV 3.0L V6:

Firing Order:
1-4-2-5-3-6

Cylinders:
........(back).......
|...1....2....3...|
........................
|...4....5....6...|
.......(front)

Let me know if this helped.....

May 06, 2010 | 2003 Mazda MPV

2 Answers

Engine misfire


It sounds like the coil is going out on that cylinder,but replace the boot with the coil.It would not hurt to use a injector cleaner first,Lucas is the best.

Jan 25, 2010 | 2004 Mazda 6

2 Answers

Need engine diagram for 96 mazda 626 manuel trans.. trying to figure out if i have a hydraulic clutch. lost clutch pedal all fo a sudden and trying to identify the problem.


You can go to autozone.com and register for full free online repair manual.
Then login, choose year, make, mode, and then view repair manual.
It will have all the diagrams and anything else you could need for your car.

Is this the 4 or 6 cylinder?

here is a preview of one of several diagrams:

50f21d0.jpg

Nov 14, 2009 | 1996 Mazda 626

1 Answer

Slave cylinder replacment for an 04 mazda rx8


u need to have the dealer fix this, u will need special tools to replace the slave and master cylinder of the clutch

Aug 09, 2009 | 2004 Mazda RX-8

Not finding what you are looking for?
2003 Mazda Mazda6 Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...