Question about 2001 Ford F350 Super Duty SuperCab

1 Answer

EXACT LOCATION OF FACTORY HORN

I WANT TO INSTALL A AFTER MARKET HORN THE USES THE STOCK WIRING. I CAN'T FIND THE HORN I KNOW IT FRONT, PASSENGER SIDE BUT WHERE EXACTLY.

Posted by on

  • rabhockey69 Jan 18, 2009

    thanks will go check it now ,,,,

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

Go to the frt off the vech have some one release the hood with your right hand pick up on the hood with your left hand go to the release handle for the hood while your hand is at the release handle slide it towards the left you should feel a bracket that the horn good luck kdc744

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The horn dose not sound when button is pushed on steering wheel. Passenger air bag is off, and how can I turn it on to operational mode


As far as the passenger airbag is concerned - OFF may be normal. This is an excerpt from the owner's manual (page 1-67).

Passenger Sensing System
The vehicle has a passenger sensing system for the
right front passenger position. The passenger airbag
status indicator will be visible when you start the vehicle.
The word OFF or off symbol will be visible near the
clock, located in the center of the instrument panel,
during the system check. See
Passenger Airbag Status
Indicator on page 3-27
.
When the system check is complete, either the words
ON and OFF or the symbol for on and off will be visible
under certain conditions.
The passenger sensing system will turn off the right
front passenger frontal airbag and seat-mounted
side impact airbag (if equipped) under certain conditions.
The driver airbags are not part of the passenger
sensing system.
The passenger sensing system works with a sensor that
is part of the right front passenger seat. The sensor is
designed to detect the presence of a properly-seated
occupant and determine if the right front passenger
frontal airbag and seat-mounted side impact airbag
(if equipped) should be enabled (may inflate) or not.


The horn is another matter. There are four possibilities here. I will list them in order of likelihood:

  1. Bad switch in the steering wheel. These are common failure items.
  2. Bad horn relay
  3. Bad horn assembly itself
  4. Faulty wiring in the horn circuit (including fuse)
You can have the switch(es) replaced in the steering wheel, but they are just as likely to fail again. I have had this issue happen in the past, and I simply went to the bottom of the steering column, found the horn button wire, and installed a dashboard mounted horn button. It is legal in most jurisdictions for inspection purposes as long as the button is easily accessible by the driver.

Dec 15, 2015 | 2005 Chevrolet Aveo

2 Answers

Horn location


The horn if i remember correctly is behind the plastic wheel arch at the front if a RHD then its passenger side if a LHD the its passenger side

Mar 12, 2013 | 2006 Chrysler PT Cruiser

1 Answer

1999 caviler horn won't work but makes clicking noise on right side by glovebox what to do


Had the same exact problem.Found the horn had collected water in the neck of the horn.Froze and split the horn housing,therefore causing that clicking noise inside by the glove box.The horn is located front passenger side in front of the tire / wheel well protector.Check it out first,cause your horn relay is working, your horn is not .Cheaper to get 1 from a auto yard..had this problem twice in the 12 years i had it .Bad location so the 2nd time i relocated to a hirer spot to eliminate water from the tire splash.HAVE NO PROBLEM SINCE been 7 years,

Feb 15, 2011 | 1996 Chevrolet Cavalier

1 Answer

Wheres my horn located need to replace it


  • Locate the original manufacturer's horns by looking under the hood.the most likely location is under the passenger side headlight.
  • Remove the passenger headlight. Unscrew two nuts on each side of the headlight with a socket wrench and remove it to expose the horns. Loosen the mounting bolt for the old horns with a socket wrench and unplug the power connectors. Remove the two horns.
  • Mount the new horns with the attachments that came in the kit. You should be able to simply mount the new horns in the old brackets if your kit is a direct factory replacement. Some custom horn kits include air compressors that may require you to install the horns in a non-standard location.
  • Plug the old wiring harnesses into the new horns if they are compatible to retain the factory wiring. Some aftermarket horn kits may include a custom wiring harness that you will need to connect to your car's original wiring using a wire/crimper splitter.
  • Test the new horns to ensure they work. Be aware that horns that use a compressor will be extremely loud.




Aug 25, 2010 | 1997 Pontiac Trans Sport

2 Answers

Where is the horn located on a Hyundai Tucson please ??


There are two horns. One on each side, under to the side, under headlight area. The drivers side you can remove the battery for clear access. The passengers side can only be accessed from below the car, due to the A/C lines. The factory connectors are impossible to remove, so be ready to cut the wires.

Jun 17, 2010 | 2006 Hyundai Tucson

1 Answer

I have a 1995 sunfire car and i dont know where


It is located behind and below the passenger side headlight. It can be changed yourself, but being an auto technician, I can tell you it's not the easiest to change, it is most accessible from under the car. Remove the lower front splash shield from the right side wheelhouse for access. 13mm socket for the bolt and unplug the wiring harness. If you get a universal horn, you will have to cut the wiring harness to splice in the horn.

Oct 02, 2009 | 1995 Pontiac Sunfire

2 Answers

2008 Equinox Horn Replacement


You can use any horn of your choice.It's like you are buying a pair of tyres and it varies from made to price and check with the seller if it is road legal as it varies from countries.Hope this helps.

Sep 02, 2009 | 2008 Chevrolet Equinox

1 Answer

Replacing the horn.


OK, here is a step by step guide to help you replace the horn at hand.


Step1 Locate the stock horn. It will be in the front under-hood area of the truck and may be under the battery or inside the area between the fender and the inner fender. Behind the grille is also a possible location for the stock horn.
Disconnect the power wire, which will be attached to a spade on the horn. If possible, remove the horn. The horn will be held in place with a small bolt. Step2 Purchase a replacement horn, either from the dealer or a universal aftermarket model from an automotive parts dealer. Step3 Install the horn in the original mount if a stock horn is the replacement choice. Reconnect the power wire. Step4 Mount a universal horn in the stock bracket if possible, or use a large self-tapping screw and mount in a convenient location using the bracket that is supplied with it. Step5 Connect the wire connector to the horn. In most cases the stock wire connector will simply plug on to the spade connection of the new horn. If it does not fit, cut off the original connector and replace it with a solderless female spade connector and plug that onto the horn terminal. If the horn has two terminals, the other is to be grounded to the car body using a self-tapping screw.


Please rate and god bless:)

Mar 23, 2009 | 1999 Chevrolet Cavalier

1 Answer

I don't know where the horn is located on my 1992 ford bronco, where is it? and what color are the wires the come out of the relay because I want to use the factory horn button and factory relay but put a...


Look between the radiator support and the front grill on the left and right hand sides.
Also,,there is no need to replace the Horn Relay when replacing the horn unless the relay is faulty.

Jan 19, 2009 | 1992 Ford Bronco

1 Answer

HORN


normally on the frame under the hood or the wheel well have someone to blow the horn until you find it

Jan 18, 2009 | 2001 Ford F350 Super Duty SuperCab

Not finding what you are looking for?
2001 Ford F350 Super Duty SuperCab Logo

Related Topics:

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...