Question about 2004 Dodge Ram 1500

Open Question

2004 Dodge Ram 1500 rear end gear ratio - 2004 Dodge Ram 1500

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: brake pad replacment on 2004 Dodge Ram 1500

Remove two bolts holding caliper on and pull up as hard as you can on the caliper. Wiggling back and forth at the same time helps.

Posted on Aug 02, 2008

motor1258
  • 6674 Answers

SOURCE: belt diagram 2004 5.7 liter engine dodge ram 1500 1/2 ton 4x4

click on this link, and scroll down to 5.7L

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800ba71e

Posted on Dec 22, 2008

fgainer
  • 54 Answers

SOURCE: 2004 dodge ram 1500 rear brake light out how to replace?

Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.

Posted on Feb 01, 2009

  • 840 Answers

SOURCE: passanger side mirror replacement on 04 dodge ram 1500?

very easy take the mirror inside cap off if you can not get to the 3 bolts then you will have to take trim panel off to take trim panel off look for plastic caps take them out and unscrew them then pop out the bottom of the door and pop the sides out then lift up and out should be loose enough for the bolts now/ 10mm bolts 3 Please rate my response thank you very much

Posted on Feb 02, 2009

  • 98 Answers

SOURCE: 98 dodge ram 1500 rear axle, setting the backlash

there are adjusters on each side of carrier. do most of adjusting from driver side.need about 8 thou of backlash

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2000 ram 1500 4WD v8 5.9l auto. Need to change refer ring and pinion. Dose the teeth of ring and pinion should be same ront and refer?


NO--- Check Gear Ratio On Tag Or Tube--Front and Rear Are Not The Same. Or Count Teeth On Pinion And Ring Gear--Divide Pinion Number Into Ring Gear Number For Ratio.

Feb 17, 2015 | 2000 Dodge Ram 1500 Truck

3 Answers

How to change the front differential on my 2004 Dodge Ram 1500 4 wheel drive.


Unless you are a seasoned mechanic with a lot of tools and a lift, take it to the shop. This swap is like a caesarian section on your truck. All kinds of things have to come loose, like axle shafts and crossmembers and hubs and such. Not something to learn how to do.

Feb 02, 2015 | 2004 Dodge Ram 1500

1 Answer

Interchangeable parts


Yes, as the only difference i see, is that the 2000 models have dual piston calipers, stiffer springs, larger rear spring spacers, and different gear ratios. You might have to swap your gears out of the 2000 into the 97, and use your 2000 springs if you want to retain your original ridehight, I think the calipers are interchangeable directly.

Dec 05, 2013 | 2004 Dodge Ram 1500

1 Answer

RAM 1500 4.7 4WD RPM/Transmission issue


run the fault codes
the rpms change indicates a ratio change up then back down indicating a TR or VSS problem

May 11, 2017 | 2004 Dodge Ram 1500

1 Answer

2003 dodge ram 1500 4x4,vibration rear wheels ,when taking off in a slow turn,something in the rear end ,its not the brakes,something with the pinion gear i think,how do i fix it


Check your u-joints first. If it is not the u-joint, then it is probably the yoke. Take the driveshaft off/out and on the yoke you will see a nut, make sure that it is tight. You will want to drain and refill your rear end gear oil as well.

Apr 09, 2011 | 2004 Dodge Ram 1500

1 Answer

Which digit on a 2005 dodge ram identifies the rear axle ratio?


i dont believe the ratio is supplied by the vin but the ratio is written or stamped on the tag on the rear end, or front differential

May 05, 2010 | 2005 Dodge Ram 1500

1 Answer

2004 dodge ram rear end noise


while you had the cover off did you by chance look at the condition of the ring gear and spider gears...if it was run for any length of time low on fluid or with two different sized tires you may need some repairs but first inspect the ring gear and rotate till you can see the 4 little beveled gears inside the differential ....use a screwdriver and check for excess movement...look at the crossshaft and look for wear.....hope this points you in the right direction.

Sep 19, 2009 | 2004 Dodge Ram 1500

1 Answer

Rear differential


drop in to your local dodge dealer..they can run serial number and tell you what gear ratio your differential is and towing capacity of your vehicle

Mar 28, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...