Question about 2000 Chevrolet Blazer

Open Question

License plate wiring diagram - 2000 Chevrolet Blazer

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 881 Answers

SOURCE: License plate light wires

Well if you can see that you have 2 black wires on No plate light and you can see the rear lights then get a test light and turn on the parking lights with test lighttest light to earth and the point stick into wires on rear light till it lights then run wire from there to No plate...1 wire will go to light and 1 to Earth put earth to earth screw and other to No plate lisht good

Posted on Sep 23, 2009

Ad
hepcars
  • 1249 Answers

SOURCE: have to tap on license plate inorder for the

Your first easy repair, will be to remove the bulb, then lightly spray PB Blaster into the socket that holds the bulb. Wipe off all excess liquid on outside of socket...the PB Blaster is excellent in cleaning and maintaining electrical connections...I would consider replacing the bulb with a new one...also use bulb/grease when reinstalling the new bulb...this should work...if not, then you need to totally replace the bulb socket...the replacement is available at your GM Dealer, or save money at a local salvage yard...some let you find and remove the part you need...usually just 2-3 wires that will need re-connected...if you find a used one, inspect for rust, and be sure to leave extra length on each wire when you cut them off...Hope this helps.

Posted on Oct 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rear wiper, defroster and licence plate lights stopped working on my 2007 suzuki swift but when I open the rear hatch the licence plate lights come on . Any ideas what's wrong?bad ground?


[PDF]Wiring Diagram.pdf - Ken Gilbert

ken-gilbert.com/wrx/mans/99.../Wiring%20Diagram.pdf
Each connector number shown in the wiring dia- ... Rear defogger cord (Ground). Fuel tank cord,. Roof cord, ... circuit. Then check the switch, relay, fuse, ground, etc. 4. .....Rear wiper motor. Rear wiper ... License plate light RH. Tail light LH.

#? license plate light - Circuit Wiring Diagrams

circuitswiring.com/tag/license-plate-light/
2008 Volkswagen Newbeetle Main Fuse Box Diagram 2008 Volkswagen Newbeetle ...Parts: rear window defogger, shift lock, battery positive voltage, interior light, A/C clutch, ... brake light, daytime driving light, wiper and washer system, vacan, fuel pump, central ... 1997 Suzuki Geo Tracker Left Dash Fuse Box Diagram.

#? license plate light - Circuit Wiring Diagrams - Page 3

circuitswiring.com/tag/license-plate-light/page/3/
Audi A4 Engine Fuse Box Diagram Audi A4 Engine Fuse Box Map Fuse Panel ... mirror control, wiper, washer, horn, brake light, cruise control, heated rear window, ... 2003Suzuki Aerio Dash Fuse Box Diagram 2003 Suzuki Aerio Dash Fuse Box ... rear defroster, fuel injection controller, radio, A/T controller, hazard light, ...

Jan 05, 2016 | Suzuki Cars & Trucks

1 Answer

Problem with the license plate lamp and the trailer connector.


It's possible these are two separate problems. You will have to find out why the power is not reaching the license plate lamp assembly, and this means tracing the circuit. Check for power and ground at the lamp. You will have to identify the correct wires and follow them back toward the fuse to find the problem. A wiring diagram will make it much easier to solve.
Same with the trailer connector. If it's not working, I assume you mean there is no power when you plug in your trailer. You will have to figure out which wire is supposed to supply battery voltage and why it isn't. Are there any broken wires? Corrosion? Does the trailer connector have any connection to the license plate lamps? (It shouldn't.)

Feb 23, 2015 | 1999 Oldsmobile Bravada

1 Answer

Missing license plate wiring and complete assembly. How do I splice in to the trailer or tail lamp wiring? Off the "brown wire"? Is it really that easy?


These are the diagrams basically from the headlamp switch going back to the license plate lamps. The main splice after the headlamp switch going back is in the main harness near the warning chime module. If you need a larger picture or the entire outside lighting wiring, feel free to email me at csautomotivecars@att.net with all your vehicle information. Yes it is that simple by just splicing into the main rear light wiring at the brown wire. Hope this is what you were looking for.....


10_28_2012_5_31_44_pm.jpg10_28_2012_5_32_02_pm.jpg

Oct 28, 2012 | 1992 Ford F250

1 Answer

I need help solving an issue with my license plate light. They dont work. I've changed the bulbs. Still don't work. I was thinking of checking the fuse but don't know where the fuse for the license...


the number plate light runs off the back lights so their is no seperate fuse ,check teh wires that run into the boot lid as iam sure the fault is here

Apr 29, 2011 | 1997 Jaguar XJ6

1 Answer

NEED WIRING DIAGRAM FOR LICENSE PLATE LIGHT


run a wire from side light connection to the no plate lamp

Jul 05, 2010 | 2006 Dodge Stratus

1 Answer

Access to license plate bulb is difficult


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle... You'll need a small screwdriver

Sep 30, 2009 | 2006 Hyundai Sonata

2 Answers

Jeep grand cherakee 1998 License plate lights not working.


get a test light pull the bulb out turn lights on ground the test light on a good ground and touch test light to the socket and see if there is power if not check the fuses also check the wires coming out and make sure the are not bad

Aug 27, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Tailgate lights for license plate are not working. 2004 Acura MDX


On this website (link below) you find fuse box diagram and description for Acura MDX (2004)

Acura MDX 2004 fuse box diagram Auto Genius

Jun 09, 2009 | 2008 Acura Mdx

2 Answers

No back up lights or license plate lights


First chk. all fuses and bulbs. There is a backup light switch under dash either on steering colume or someplace close. plate lights should be hooked in with running lights, If bulbs are ok chk for wire unhooked or bad ground. can't help on diagram.

Feb 11, 2009 | 2004 Ford F150

1 Answer

Reverse lights and license plate light dont work


Try link below, may point you in right direction, but you'll have to scroll down & find what you need. Otherwise I'd start from bumper with test light & work my way back toward front harness, after all fuses, plugs etc been checked.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800610de

Dec 06, 2008 | 1991 Toyota Pickup

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...