Question about Mitsubishi Cars & Trucks

Open Question

1991 mitsubishi mighty max ac/heater blower fan does not work

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 131 Answers

SOURCE: 1991 mighty max

If it is 4X4 and you re not going far. Put the transfer case in neutral. If it is 2X4 standard transmission, put it in neutral. If it is an automatic transmission you need to remove the driveline.

Posted on Jul 10, 2008

  • 39 Answers

SOURCE: 95 mitsubishi mighty max main required light

If you are speeking of the check engine light you can disconnect the battery for a few minutes then reconnect it and the light should go off.

Posted on Jan 28, 2009

  • 523 Answers

SOURCE: Torque specs for mighty max

Per my Chilton's manual tehe bolts should be (cold engine) 65 to 72 FT. Pnds., the cam shaft bearing bolts should be 8x25 = 15 - 19 Ft pnds and the 8x65 should be 14 - 15 Ft Pnds.

The sequence is as follows for the (10 ) head bolts:

7 - 5 - 2 - 4 - 10

9 - 3 - 1 - 6 - 8

I hope this may help,
Tom

Posted on Oct 15, 2009

wracefans24
  • 1985 Answers

SOURCE: ANTIFREEZE IS LEAKING ON MY DRIVER SIDE FLOORBOARD

your going to have to pull back carpet and clean any liquid up and start your truck and watch for original source of leaks,have you removed the plastic cover of the heat work on the drivers side to see if the heater core is leaking and running over to the drivers side.

Posted on Dec 28, 2009

  • 523 Answers

SOURCE: put in distributor for 1991 mitsubishi mighty max

Please confirm which engine your truck has; 3.0 V6?

Thanks,
Tom

Posted on Apr 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque for installing the crankshaft for the 2.4 mitymax motor?


Mitsubishi Mighty Max crankshaft bolt Questions & Answers ...

www.fixya.com > ... > crankshaft bolt > Cars & Trucks > Mitsubishi
Mitsubishi Mighty Max cars & trucks crankshaft bolt questions and answers. ...Torque specs for mighty max The head torque specs for 1991 mitsubishi mighty max 2.4 I ... 1989 mitsubishi 2.0 motor crankshaft was turned while timeing belt was off. ...how to install a clutch kit on my 1994 mitsubishi mighty max Disconnect the .

Oct 02, 2015 | Cars & Trucks

1 Answer

Blower fan heater not working


Do you have power and ground at the blower motor ?

Jan 21, 2014 | Mitsubishi Cars & Trucks

2 Answers

How to reset maintenance required light for 1991 mitsubishi mighty max


there is a small switch behind one of the switch blank off plates to the right of the steering column. It is a very small switch about 6" deep into the dash, hard to find easy to reset.

Nov 12, 2010 | 1990 Mitsubishi Mighty Max

1 Answer

1991 Mitsubishi Mighty Max 2D 4X4 V6 3.0L No Start.


you can get pressure specs from your local parts dept, and check injector signal with a noid light

Apr 23, 2010 | 1991 Mitsubishi Mighty Max

1 Answer

1991 MITSUBISHI MIGHTY MAX 2.4 CHECK ENGINE LIGHT COMES ON AND OFF AND WHEN IT DOES I CAN FEEL THE ENGINE CHANGE. I JUST REPLACED THE ALTENATOR AND THE MASS AIR FLOW SENSOR.


try the oxygen sensor. the heated one, when the heater burns out it causes problems. Its the one with 3 wires usually in the rear

Mar 23, 2010 | 1991 Mitsubishi Mighty Max

1 Answer

Put in distributor for 1991 mitsubishi mighty max


Please confirm which engine your truck has; 3.0 V6?

Thanks,
Tom

Feb 28, 2010 | 1991 Mitsubishi Mighty Max

2 Answers

ANTIFREEZE IS LEAKING ON MY DRIVER SIDE FLOORBOARD AND IVE CHECKED OUT THE HEATER HOSES AND HEATER CORE AND THATS NOT IT. IS IT SOMETHING ON THE MOTOR FACING THE FIRE WALL BLOWING ANTIFREEZE IN THROUGH THE...


your going to have to pull back carpet and clean any liquid up and start your truck and watch for original source of leaks,have you removed the plastic cover of the heat work on the drivers side to see if the heater core is leaking and running over to the drivers side.

Dec 28, 2009 | 1991 Mitsubishi Mighty Max

1 Answer

Torque specs for mighty max


Per my Chilton's manual tehe bolts should be (cold engine) 65 to 72 FT. Pnds., the cam shaft bearing bolts should be 8x25 = 15 - 19 Ft pnds and the 8x65 should be 14 - 15 Ft Pnds.

The sequence is as follows for the (10 ) head bolts:

7 - 5 - 2 - 4 - 10

9 - 3 - 1 - 6 - 8

I hope this may help,
Tom

Oct 12, 2009 | 1991 Mitsubishi Mighty Max

1 Answer

1991 mighty max


If it is 4X4 and you re not going far. Put the transfer case in neutral. If it is 2X4 standard transmission, put it in neutral. If it is an automatic transmission you need to remove the driveline.

Jul 10, 2008 | 1991 Mitsubishi Mighty Max

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...