Question about Cars & Trucks
Club car accelerates fine and won't accelerate
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Accelerator Loss
From my experience in owning a VW it souns electrical. Most issues with VWs are electrical related. Most likely a realy of some type. Could also be fuel injection but that is electronic too.
I’m happy to help further over the phone at https://www.6ya.com/expert/phillip_293d34ebcf028794
Posted on Jan 06, 2009
It sounds like you may have a problem feeding the fuel to your engine, I had the same problem with my 89 RS. All the 1989 model's fuel systems were recalled. I think you may need a new fuel pump. The fuel pump is located inside the gas tank in the rear of the car right under the rear axle. The fuel pump itself isn't too expensive, but with other small parts such as the electrical harness upgrade and fuel filter and the labor you should be looking somewhere in the $500 range. I hope this helps.
Posted on Jan 12, 2009
Since you did not say what type of transmission you have i will suspect the clutch is slipping if it's a manual.
If it's an automatic, it could be several things. Low fluid level...clogged filter, fluid needs to be changed..transmission serviced...weak pump, bands/clutch packs worn...etc
Good luck..i hope this helps, please rate me a fixya.
Posted on Jul 29, 2009
Check your TPS Throttle positioning sensor. Sounds like it has a dead spot in it or it is failing. May also be a wiring harness issue or loose connection at TPS too! If its intermittent then it will soon go out completely. It should be located on your fuel pedal. Remove it and check it with an ohm meter. Check resistance all the way thru from 0-100 percent. When it is not working it should do nothing and show no resistance. When it is working the resistance value will increase and or decrease as you turn the sensor.
Posted on Feb 22, 2010
Tips for a great answer:
Oct 21, 2014 | Cars & Trucks
Mar 17, 2013 | 1997 GMC Jimmy
Feb 26, 2018 | 1992 Toyota 4Runner
Nov 11, 2012 | Cars & Trucks
Nov 16, 2017 | 2000 Pontiac Bonneville
Sep 04, 2012 | 1996 Nissan Altima
Jan 17, 2012 | 2001 Ford F250 Super Duty Super Cab
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: