Question about 2000 Chevrolet Impala

1 Answer

03 impala cranked this morning and i went to the store. Came back home to add air in my tire and it would turn over but nor crank.

Posted by on

  • Carden Jan 03, 2013

    Now just replaced the spark plugs. Still nothing. Should I try replacing the crank sensor?

  • Carden Jan 08, 2013

    Found out the problem.. After changing all those parts, it was the ignition control module, which took my husband 10 minutes to change. My car is running great now. Just wanted to let you all know incase this happens to you...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 53 Answers

You need to test for spark and fuel.
If the coil pack went out, you won't get spark. If the fuel filter is clogged you won't get fuel. Try shaking (bouncing) the rear of the car. Maybe debris is blocking the fuel pickup.

Posted on Dec 31, 2012

  • Carden Jan 02, 2013

    Thanks for the reply. However, coil packs and fuel pump replaced and fuel filter is fine. Any more suggestions, it is still turning over but not canking.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Drove home last night and this morning my impala 2003 wont start


Security. Turn the key to run. Let it sit for ten minutes, off for thirty seconds. Then try to start. Do this three times for a relearn. Don't try to start.

Sep 07, 2014 | 2003 Chevrolet Impala

3 Answers

Why is it that my 2003 impala will crank and turnover but wont start


I sounds like you have a fuel flow problem. Replace the in-line fuel filer located in the fuel line in front of the rear tire. Check out this web site for "how to" replace the in-line fuel filter.
http://www.ehow.com/how_6724057_install-filter-2003-chevy-impala.html

Aug 15, 2014 | 2003 Chevrolet Impala

1 Answer

Is there a safety switch on a 2006 pt cruiser?


Only Ford products have an inertia switch for the fuel pump.
You may have damaged the fuel pump in the tank.
I would start at the beginning and find out if you have spark to the plugs and fuel pressure.

Apr 12, 2013 | 2006 Chrysler PT Cruiser

1 Answer

I have a 2003 chevy impala. My impala cranks fine in the morning but after been driven for a while and I cut it off; its like I have to wait for it to cool down before it will crank back up....for a while...


I have a similar like yours, I changed the ignition switch, 40 bucks in any auto-parts should fix your problem, I strongly recommend see how to disarm your dash board it a big mess but very easy and doable..
Good luck and do not give up on american cars

Sep 12, 2011 | 2003 Chevrolet Impala

2 Answers

My 1999 yukon wont start i changed master air flow


Fuel pumps are real common to go out on those vehicles

Mar 15, 2010 | 1999 GMC Yukon

2 Answers

Why wont my 03 impala start after water got in the air intake will not crank just clanks and doesnt seem to be getting any fire


Be very careful about what you do. If you get a significant amount of water into the cylinders, you can destroy the engine by trying to crank it. Water will not compress, unlike air, and severe damage can be done.

Take it to a repair shop.

Oct 10, 2009 | 2003 Chevrolet Impala

1 Answer

Car starts, then doesn't, then does, then doesn't


check the fuel pump relay! It sounds like it is one of your relays. If it was an electrical or sensor problem, the check engine light would be on.

May 22, 2009 | 1998 Mercury Grand Marquis

1 Answer

My 1997 Dodge Avenger's engine won't start


Try cam and/or crank sensor. If crank to cam timing isn't detected properly it'll crank all day but won't start. I had similar problem on my 2.5L V6 Avenger....drove home fine, no engine light, next morning it cranked, but wouldn't start. The crank sensor was faulty.

Jan 11, 2009 | 1997 Dodge Avenger

3 Answers

Starting problems with my 2003 Hyundai Santa Fe


I have an 03 Santa Fe as well and just had the exact thing happen to me. One day, it just wouldn't turn over at all and I had to have it towed to the dealer. They replaced the "crank shaft position sensor" and now the car is fine. I am not sure if this is your problem but it might be worthwhile asking someone to check it out.

Dec 29, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2000 Chevrolet Impala Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...