Question about 2005 Hyundai Sonata
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is located at the right top of engine (V6). Looking from the front of the car, it is just past the plastic cover over the engine. It has a silver clip (looks like a paper clip). remove clip and unplug sensor.
Posted on Aug 28, 2008
remove the cap on the radiator or the header tank, use a plastic container that will hold about 4 ltrs of coolant, there should be a drain tap at the bottom of the radiator, if not you have to remove the hose clamp on the bottom hose and let the coolant drain out.
Replace the hose and clamp, top up the radiator and run the motor while checking the coolant level, if the level goes down a bit just top it back up and check over the next day.
hope this helps
Posted on May 19, 2009
The sensor is located on the left hand rear side of the block (near the bell housing). It is held in place by a 10mm bolt. It's to the right of the exhaust manifold (LH - radiator side) on the V6. Once you purchase the new sensor you'll be able to identify it on the engine. The connector to this sensor is located in the illustration.
A word to the wise... replace the O2 snsr as well.
Posted on Oct 04, 2009
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.
Posted on Feb 21, 2010
My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.
-- begine excerpt from 2000 Hyundai Sonata Repair guide --
The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.
--- end excerpt from 2000 Hyundai Sonata repai guide ---
Posted on Jan 02, 2011
Tips for a great answer:
Jun 23, 2016 | Hyundai Cars & Trucks
Jul 08, 2015 | Hyundai Cars & Trucks
Oct 20, 2013 | Hyundai Motor 2003 Sonata
Apr 17, 2011 | Hyundai Sonata Cars & Trucks
Dec 29, 2010 | 2000 Hyundai Sonata
Dec 10, 2010 | Hyundai Sonata Cars & Trucks
Sep 08, 2010 | Hyundai Sonata Cars & Trucks
Mar 27, 2010 | Hyundai Motor 2004 Sonata
Feb 21, 2010 | 2000 Hyundai Sonata
Sep 24, 2009 | 2000 Hyundai Sonata
214 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: