Question about 2005 Chevrolet Impala

Open Question

How to change fuel pressure regulator on a 2005 chevy impala

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 173 Answers

SOURCE: where is the fuel pressure regulator on my chevy

HERE is a picture of the location. let me know if this help remember release pressure before removing regulatorb1a6d1d.jpg52c36aa.jpg

Posted on Sep 25, 2009

Ad
  • 124 Answers

SOURCE: 2002 chevy Blazer hard starting

i agree with the fuel pump problem this is quite common with these trucks. but the fuel injectors on this motor are not accesable without removing the plenun and they are not standard fuel rail injectors so you can not test as earlier instructed.

Posted on Dec 04, 2008

  • 92 Answers

SOURCE: fuel pressure regulator had no vacuum line connected

another engineers wet dream. think of it this way . what is normally in the intake when the engine is running.. answer vacume, hence the regulator gets its vacume without a hose connected to it as its already in a full time vacume chamber.no hose required . ps be carefull to seat the regulator and o rings securely into the housing befor you reattach the secureing metal clip.
good luck chris

Posted on Mar 23, 2009

  • 10 Answers

SOURCE: 2000 chevy impala a/c low pressure port

PASS SIDE BY THE DRYER NEAR FIRE WALL.

Posted on Jun 28, 2009

  • 118 Answers

SOURCE: How do i change the Blower motor resistor on a 2005 chevy impala?

The blower motor resistor is located behind the glovebox mounted in the fan housing box under the dash.

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy cavalier flooded fuel system engine wont start


check your fuel pressure regulator,pull the vacuum line off it is wet with fuel,replace it,then put vacuum pump on regulator side see if it hold at least 15 psi steady,if it start loosing vacuum ,change it,

Oct 20, 2014 | 2005 Chevrolet Cavalier

1 Answer

05 chevy impala will crank over but will not start, changed the fuel filter it was extremely dirty the fuel pump is working.


First check for spark at any of the sparkplugs if you have spark then check your fuel pressure.Just because its working does'nt mean it has enough pressure for it to run.It may be a weak pump.

Aug 08, 2011 | 2005 Chevrolet Impala

1 Answer

My 2005 Chevy Impala smells gasy when ever started and sometimes after idling for awhile.


SMELL GAS YOU NEED CHECK ALL FUEL LINES UNDER THE HOOD IN THE ENGINE COMPARTMENT.IF GAS IS STRONG UNDER HOOD YOU DONT SEE LEAKING FUEL LINES.YOUR FUEL RAIL FUEL INJECTORS LEAKING OR FUEL PRESSURE REGULATOR O - RING OR DIAPHRAM LEAKING GAS.IF FIND NO LEAKS UNDER THE HOOD CHECK FUEL LINES UNDER CAR FROM ENGINE TO FUEL TANK FOR LEAKS.IF ALL IS GOOD YOUR EVAPORATIVE CANISTER SOAKED WITH GAS OR YOUR EMISSION EVAPORATIVE SYSTEM NOT WORKING. DEALERSHIP HAS TO CHECK AND FIX.

Jul 03, 2010 | 2005 Chevrolet Impala

2 Answers

2005 impala smells like fuel at start up and while driving, gas tank not leaking. smell fumes worist @ morning starts even when heater off and vents shut


its your fuel pressure regulator. pain in the rear to change. its the small brass looking thing next to the throttle with a vacuum line going to it . the part cost me 50$ and i paid a guy $ 75 to put it in. worth every penny. looks easy to change yourself, but not as easy as it looks.

Mar 03, 2010 | 2005 Chevrolet Impala

3 Answers

05 Impala missfire code 301 have changed


check intake for vaccum leaks,the gasket also and egr valve, thats alot of parts to have replaced without diagnosing first, if there are no fuel leaks and you said all injectors were replaced then you have a defective fuel pump, also these engines had misfire problem because of dirty injector but you replaced them so count that out. good luck.

Nov 02, 2009 | 2003 Chevrolet Impala

1 Answer

Car wants to start but dies immediately. fuel pressure test bad


Couple of things, the fuel pressure held before with the old regulator but now it doesn't. Are you sure you got the tiny o-ring out when you changed it and installed it on the new one? Is there any fuel in the vacuum line to the regulator? Does the white exhaust smell like fuel or coolant burning?

Feb 18, 2009 | 2002 Chevrolet Impala

2 Answers

Where is the PCV valve on a 2002 Chevy Impala?


This sounds like a possible bad fuel pressure regulator.
Depending on which engine (3.4l or 3.8l) they can be easy or hard to replace. For pics on the 3.4l regulator replacement, see this link...
Tech JK
----------------------------

Dec 21, 2008 | 2002 Chevrolet Impala

Not finding what you are looking for?
2005 Chevrolet Impala Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...