Question about 1993 Honda Prelude
2.3 Si Automatic Trans.
Trying putting silicone on first and tighten down in a crisscross pattern first hand tighten all the bolts then finish tightening the rest of the way
Posted on Dec 31, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
make sure they are tight
could be time for head gaskets
make sure the old gasket from the old filter came off the block sometimes they come off old filter and stick this causes a leak due to improper seal.
Posted on Apr 10, 2009
Its probably your speed sensor mounted on the back side of your transmission on top of the final drive gear. Its the sensor/plug located just under the shift linkage. Make sure its bolted down tight and check for any loose connections.
Posted on Aug 15, 2009
The most common oil leaks in Honda are the Oil filter gasket, Oil pan gasket, Cranksaft oil seal, and the Distributor oil seal.
Try to look at those part and tell us if u see some oil near it.
Posted on Dec 02, 2010
Tips for a great answer:
Nov 28, 2015 | GMC Cars & Trucks
Mar 08, 2014 | Chevrolet Malibu Cars & Trucks
Dec 28, 2012 | 1998 Ford Windstar
Jan 16, 2012 | 1990 Honda Prelude
Jan 24, 2011 | 1993 Honda Prelude
Dec 13, 2010 | 1995 Honda Prelude
Oct 24, 2009 | 1993 Honda Prelude
Sep 03, 2009 | 1992 Honda Prelude
Mar 07, 2009 | 1993 Honda Prelude
Oct 23, 2012 | 1993 Honda Prelude
98 people viewed this question
Usually answered in minutes!