Question about 1991 Ford Taurus
I checked the fuse, it is ok. wipers worked one day now don't
Maybe worth checking wiper switch or wiper motor.If you have a multi-meter it maybe worth checking power supply to switch and motor..hope it helps.....
Posted on Dec 30, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Wire connection are the only thing left to check. But then again multi function may not be operational you just a have to ck connections motor for wiper may be bad also
Posted on Apr 21, 2011
If you have good voltage as well as a good ground to the motor then yes I would say it's the motor that's bad. I hope this helped and good luck.
Posted on Feb 19, 2011
Check the relay relay maybe latched on. See if there is an identical relay in the box and swap them if problem goes away replace relay.
Posted on May 23, 2012
unplug the wire at the wiper motor and then turn the key on and then turn the wiper switch on and test the wires at the plug with a 12 volt tester . if u dont have any thing then ur wiper switch is bad , if u have juice at the plug then it sounds like its the motor.
Posted on Jul 13, 2012
Tips for a great answer:
Nov 26, 2013 | 1990 Ford Taurus
Dec 29, 2012 | 2000 Jeep Grand Cherokee
Jul 15, 2017 | Ford Ranger Cars & Trucks
Jul 15, 2012 | 2009 Scion tC
Nov 21, 2011 | Cars & Trucks
Jan 22, 2010 | 2004 Ford Taurus
Mar 16, 2009 | 1990 Ford Taurus
Jul 18, 2008 | 1991 Ford Taurus
245 people viewed this question
Usually answered in minutes!