Question about Cars & Trucks

Open Question

Where is the oil pressure switch on a ford laser

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75051 Answers

SOURCE: oil pressure sensing switch location

The oil switch is located on the passenger side of the truck in the back of the engine. Look for the transmission dipstick, then feel for it between the transmission dipstick and the engine block. It is hidden pretty well, but a socket wrench will fit to take it off. The new part uses a 1-1/16 socket, the old part for some reason was smaller, I think 13/16 inch. Hope that helps.

Posted on Nov 06, 2008

alicantecoli
  • 22095 Answers

SOURCE: leak around oil pressure switch on ford taurus 1994

the internal seal has gone ,renew the switch

Posted on Dec 03, 2009

01fordeb
  • 1033 Answers

SOURCE: 2000 ford epedition location of oil pressure

Right beside the oil filter. easy to change and cheap part. $30 for part and 10 min to change. just be sure you have old paper or something to cover your area from oil leaking.

Posted on Jan 16, 2010

iambanshee74
  • 3489 Answers

SOURCE: where is the oil pressure sensor/switch on a 1998

email me at iambanshee74@yahoo.com and I will get the diagrams right to you.

Posted on May 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is oil pressure switch on 1992 ford 150


Most oil pressure switches/sending units were located are near the oil filter. Did you have the same symptoms before you changed the oil pump? How many miles on your engine? As the bearings (main, rod, camshaft, etc) wear, the gap where oil flows through gets larger, and oil pressure will decrease. If a direct reading gauge shows very low oil pressure at idle, it's time to rebuild or replace the engine.

Apr 11, 2017 | Ford Cars & Trucks

1 Answer

Will the oil pressure sensor prevent ignition to the motor? 1999 Ford Laser - KN or Mazda 323


no oil sensor not related

fuel ,spark a broken timing belt

fuel
pump or relay you should be able to hear the fuel pump working
if engine light is on
crank angle sensor

Nov 05, 2016 | Ford Cars & Trucks

1 Answer

Why is my Ford territory oil pressure light intermittently coming on


Good Day

Firstly check your all Oil pressure switches if they are not faulty.
Remove your electrical oil pressure switch and fit a mechanical oil pressure switch and start the motor:Oil Pressure reading should be between 4-8 bar on the gauge.
Motor must be at working temperature.
If Oil Pressure is below 4 bar their could be a problem on your crankshaft.Depending on milage.
Your Big end and Main bearings determine your oil pressure.
If the engine milage is high this can cause oil pressure fluctuation as their is wear on the bearings.

Regards
Martin

Jun 12, 2014 | 2007 Ford Territory 4.0

1 Answer

Oil light keeps coming on


1992 ford explorer with the oil light coming on, this can be due to a bad switch, this switch is called the oil pressure switch and is located near the oil filter area, this would be the cheapest way to go first and if the light still comes on then you will need to have a pressure gauge hooked to where the switch goes and the gauge will tell you if its really low on oil pressure and if it is then this may be due to worn engine bearings or weak oil pump, i will tell you i have not seen an explorer with low oil pressure just needing a oil pump, most of the time it is time for another engine. what =i have seen is alot of them with bad oil pressure switches that were making the oil light come on . hope this is helpful, good luck.

Mar 19, 2011 | 1992 Ford Explorer

1 Answer

I need to know where the oil sending gauge is in a 1993 ford f250


Oil pressure switch location - 4.9L engine

tecnovative_92.gif
Oil pressure switch location - 5.0L/5.8L engines

tecnovative_93.gif
Oil pressure switch - 7.3L diesel and 7.5L gasoline engines (adapter is for 7.3L only)

tecnovative_94.gif

Feb 04, 2011 | Ford F-250 Cars & Trucks

1 Answer

How do you change the oil pressure switch on 99 ford explorer? And where is it located in laymens terms.


OIL PRESSURE SWITCH ON LOWER SIDE OF ENGINE NEXT TO THE OIL FILTER.BOTH ARE ON THE SAME OIL CHANNEL IN CYLINDER BLOCK.ALL YOU HAVE DO TO REMOVE IT.IS DISCONNECT OIL PRESSURE SWITCH ELECTRICAL CONNECTOR.THEN USE A OIL PRESSURE SWITCH SOCKET WITH A RARCHET WRENCH AND EXTENSION..YOU CAN BUY SOCKET AT ANY AUTO PART STORES.REMOVE OIL PRESSURE SWITCH. WHEN INSTALLING NEW ONE MAKE SURE THREADS HAS SOME KIND OF SEALER LIKE TEFLON TAPE CAN BE USED ON NEW OIL PRESSURE SWITCH IF IT DONT HAVE NO SEALER ON THREADS. WHEN YOU GET NEW ONE IN PLACE CRANK VECHICLE CHECK FOR LEAKS.

Nov 14, 2010 | 1999 Ford Explorer

2 Answers

1986 ford thunderbird oil gauge on and beeping


I would check that the engine oil level is high, then I would check that the pressure is high enough by plugging a gauge into the oil pressure switch socket after removing the oil pressure switch.

There is a possibility that the oil pressure switch is bad, or the oil pump has failed, unfortunately.

Oct 13, 2010 | 1986 Ford Thunderbird

1 Answer

2000 ford windstar LX 3.8L where is he oil pressure switch


oil pressure switch is always VERY close to the oil pump itself, check around the oil filter if its located at the bottom of te engine.

Jun 16, 2010 | 2000 Ford Windstar

1 Answer

Leak around oil pressure switch on ford taurus 1994


the internal seal has gone ,renew the switch

Dec 03, 2009 | 1994 Ford Taurus

2 Answers

Ford Laser Oil light doesnt show up?


Have a mechanical oil pressure test done. This will verify that the engine has sufficient oil pressure, it may be that the light bulb burned out sense it wont come on even when the key is in the start position.

May 18, 2008 | 2006 Ford Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...