Question about Cars & Trucks
Posted by Anonymous on
Yes actually theres two wrenches they cost between 20 and 30 dollars or you can take a strap like a flat tie down and a piece of duct tape wrap it around your pully and either tie it to something or have someone hold the end while you break big nut loose
Posted on Jul 21, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
remove drive belt then aquire the clutch removal tool from Auto zone or Napa, there is a specific puller designed to remove this clutch,in some cases in order to hold the pulley while removing center nut or bolt you must use a chain wrench with an old leather belt wraped around the pulley to protect the v-ribs on pulley in order to get the pulley bolt or nut loose the clutch will just turn when trying to loosen center nut if you don't use the chain wrench to hold it, after removing said nut or bolt attach the puller to the clutch and while holding it stationary with the chain wrench proceed to turn the shaft of the puller to remove the clutch, it should pop free after a couple of turns with a socket wrench of the appropriate size. PS use the chain wrench ($22.00 Auto zone) only in the corerect direction it does not clamp effectively either direction. also sometimes there is special holding tool for certain clutches, consult Napa or the dealer before buying the chain wrench it may not be effective in holding the clutch while trying to remove center bolt.
Posted on Jul 08, 2009
If their is one large nut between the fan and pump then look for notches in the side of the sharp edges of the nut. If they are there then it is lefthand thread.
Posted on Jan 18, 2010
how do you remove the fan and fan clutch from 1998 f150 4.2 liter engine. i am trying to replace the water pump but i cannot get the fan to break loose . i cannot figure how to stop pump from turning while trying to loosen the bolt or nut that holds the fan clutch on the water pump shaft . is there a special tool to help me with this
Posted on Jul 25, 2010
Tips for a great answer:
Mar 13, 2015 | 2005 Dodge Dakota Quad
Sep 04, 2011 | 2000 Ford Crown Victoria
Apr 01, 2011 | 2000 Chevrolet S-10
Jul 15, 2010 | 1998 Ford F150 Regular Cab
Jul 19, 2009 | 2000 Kia Sportage
Jul 10, 2009 | 2000 Kia Sportage
Jul 04, 2009 | 1994 Ford F150 Styleside Supercab
Jun 08, 2009 | 2000 Ford F150 Flareside SuperCab
Mar 10, 2009 | 1994 Ford F150 Styleside Supercab
Jan 16, 2009 | 1997 Ford F150 Regular Cab
153 people viewed this question
Usually answered in minutes!