Question about 2004 Lincoln Aviator

Open Question

Thermostat 4.6 dohc 2005 aviator location - 2004 Lincoln Aviator

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 496 Answers

SOURCE: thermostat on 2005 aviator location

Removal & Installation

Print


4.6L & 5.4L SOHC Engines

  1. Partially drain the engine cooling system to a level below the thermostat.
  2. Disconnect the upper radiator hose from the water outlet adapter.
  3. Remove the power steering reservoir upper mounting bracket.
  4. Remove the bolts and remove the water outlet adapter.
  5. Remove the water thermostat and the O-ring seal. Discard the O-ring seal.
  6. Installation is the reverse of the removal procedure. Tighten the water outlet adapter bolts to 18 ft. lbs. (25 Nm). Tighten the power steering reservoir upper mounting bracket as shown in the accompanying illustration.

    0996b43f80204ea2.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the power steering reservoir upper mounting bracket and tightening specifications


    0996b43f80204ea3.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Exploded view of the water outlet adapter and tightening specifications



5.4L & 6.8L Engines

  1. Partially drain the cooling system to a level below the thermostat.
  2. Disconnect the upper radiator hose.
  3. Remove the coolant outlet connection, as follows:
    1. Remove the bolts.
    2. Remove the coolant outlet connection.

  4. Remove the (A) coolant thermostat and the (B) O-ring seal.
  5. Discard the (B) O-ring seal.

    0996b43f80204ef0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Remove the (A) coolant thermostat and the (B) O-ring seal


To install:

NOTE Thermostat must be installed as illustrated.
  1. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold.

    0996b43f80204ef1.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold

  2. Install the coolant outlet connection, as follows:
    1. Position the coolant outlet connection on the upper intake manifold.
    2. Install the bolts and tighten to 15-22 ft. lbs. (20-30 Nm).

  3. Connect the upper radiator hose.
  4. Fill the cooling system.

  1. Before servicing the vehicle, refer to the precautions section.
  2. Partially drain the cooling system to a level below the thermostat.
  3. Disconnect the upper radiator hose.
  4. Remove the coolant outlet connection, as follows:
    1. Remove the bolts.
    2. Remove the coolant outlet connection.

  5. Remove the (A) coolant thermostat and the (B) O-ring seal.
  6. Discard the (B) O-ring seal.

    0996b43f80204ef0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Remove the (A) coolant thermostat and the (B) O-ring seal


To install:

NOTE Thermostat must be installed as illustrated.
  1. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold.

    0996b43f80204ef1.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold

  2. Install the coolant outlet connection, as follows:
    1. Position the coolant outlet connection on the upper intake manifold.
    2. Install the bolts and tighten to 15-22 ft. lbs. (20-30 Nm).

  3. Connect the upper radiator hose.
  4. Fill the cooling system.


5.4L DOHC Engine

  1. Partially drain the engine cooling system to a level below the thermostat.
  2. Disconnect the upper radiator hose, the heater water inlet hose and the heated PCV inlet hose from the water outlet adapter.

    0996b43f80204ea5.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Disconnect the upper radiator hose, the heater water inlet hose and the heated PCV inlet hose from the water outlet adapter

  3. Remove the water hose connection and thermostat.
  4. Installation is the reverse of the removal procedure. Tighten the mounting bolt to 18 ft. lbs. (25 Nm).

    0996b43f80204ea4.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Exploded view of the thermostat-5.4L DOHC engine

Posted on Aug 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Step by step on how to replace a dodge stratus 2005 water pump and Thermostat.


i hope this helps for the water pump. The thermostat is located at top of engine simply follow upper hose to engine and remove housing and replace thermostat.

Jul 03, 2016 | Dodge Cars & Trucks

1 Answer

Wear is the thermostat at on a 2005 lincoln aviator


Follow top radiator hose to top of engine. Thermostat is right there. GOOD LUCK FRIEND.

Mar 15, 2015 | 2005 Lincoln Aviator

1 Answer

Lincoln aviator thermostat


people have been attempting this since henry taught ferdinand.
the end that has the capsule or wax pellet goes towards the engine so it stays immersed

Apr 27, 2014 | 2005 Lincoln Aviator

1 Answer

Engine knocking


If this has an emblem showing DOHC then the problem is likely a Cam Phaser. You can look up info on the Web by browsing 2005 Lincoln Aviator Cam Phasers. The Ford engines also use this design.

The problem is that the Phaser automatically sets timing. Your engine is probably over advanced and each side can have different timing settings. Sometimes they sound like diesel engines.

When you read more about these engines you can at least be informed and ask a few questions at repair shops.

Now you might want to have the fuel checked out. Cheap gas will make knocking sounds. There are a few products like 104 Octane boost which may help. But if someone used E85, drain the tank. The fuel is too corrosive for your car.

Mar 24, 2014 | 2005 Lincoln Aviator

1 Answer

Thermostat on 2005 aviator location


Removal & Installation

Print


4.6L & 5.4L SOHC Engines

  1. Partially drain the engine cooling system to a level below the thermostat.
  2. Disconnect the upper radiator hose from the water outlet adapter.
  3. Remove the power steering reservoir upper mounting bracket.
  4. Remove the bolts and remove the water outlet adapter.
  5. Remove the water thermostat and the O-ring seal. Discard the O-ring seal.
  6. Installation is the reverse of the removal procedure. Tighten the water outlet adapter bolts to 18 ft. lbs. (25 Nm). Tighten the power steering reservoir upper mounting bracket as shown in the accompanying illustration.

    0996b43f80204ea2.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the power steering reservoir upper mounting bracket and tightening specifications


    0996b43f80204ea3.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Exploded view of the water outlet adapter and tightening specifications



5.4L & 6.8L Engines

  1. Partially drain the cooling system to a level below the thermostat.
  2. Disconnect the upper radiator hose.
  3. Remove the coolant outlet connection, as follows:
    1. Remove the bolts.
    2. Remove the coolant outlet connection.

  4. Remove the (A) coolant thermostat and the (B) O-ring seal.
  5. Discard the (B) O-ring seal.

    0996b43f80204ef0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Remove the (A) coolant thermostat and the (B) O-ring seal


To install:

NOTE Thermostat must be installed as illustrated.
  1. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold.

    0996b43f80204ef1.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold

  2. Install the coolant outlet connection, as follows:
    1. Position the coolant outlet connection on the upper intake manifold.
    2. Install the bolts and tighten to 15-22 ft. lbs. (20-30 Nm).

  3. Connect the upper radiator hose.
  4. Fill the cooling system.

  1. Before servicing the vehicle, refer to the precautions section.
  2. Partially drain the cooling system to a level below the thermostat.
  3. Disconnect the upper radiator hose.
  4. Remove the coolant outlet connection, as follows:
    1. Remove the bolts.
    2. Remove the coolant outlet connection.

  5. Remove the (A) coolant thermostat and the (B) O-ring seal.
  6. Discard the (B) O-ring seal.

    0996b43f80204ef0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Remove the (A) coolant thermostat and the (B) O-ring seal


To install:

NOTE Thermostat must be installed as illustrated.
  1. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold.

    0996b43f80204ef1.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Use a new (A) O-ring seal to position the (B) coolant thermostat in the (C) upper intake manifold

  2. Install the coolant outlet connection, as follows:
    1. Position the coolant outlet connection on the upper intake manifold.
    2. Install the bolts and tighten to 15-22 ft. lbs. (20-30 Nm).

  3. Connect the upper radiator hose.
  4. Fill the cooling system.


5.4L DOHC Engine

  1. Partially drain the engine cooling system to a level below the thermostat.
  2. Disconnect the upper radiator hose, the heater water inlet hose and the heated PCV inlet hose from the water outlet adapter.

    0996b43f80204ea5.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Disconnect the upper radiator hose, the heater water inlet hose and the heated PCV inlet hose from the water outlet adapter

  3. Remove the water hose connection and thermostat.
  4. Installation is the reverse of the removal procedure. Tighten the mounting bolt to 18 ft. lbs. (25 Nm).

    0996b43f80204ea4.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Exploded view of the thermostat-5.4L DOHC engine

Aug 13, 2012 | 2004 Lincoln Aviator

1 Answer

Need Diagram for 2003 Lincoln Aviator Serpentine Belt


There are 2 possible diagrams depending on if you have a 4.6L SOHC or a 4.6L DOHC. This information should be on the plate under the hood. Best of luck!
Greg

4.6L SOHC
290dfd6.gif



4.6L DOHC

0991c74.gif

Mar 02, 2010 | 2003 Lincoln Aviator

2 Answers

Diagram of thermostat location on 2004 Chevrolet


2002 Chevrolet Cavalier 2.2L SFI OHV 4cyl

2.2L VIN 4

90e0bc0.jpg

Fig. Remove the thermostat outlet bolts and outlet

1314104.jpg

Fig. Remove the thermostat


2.2L VIN F

db08240.jpg
Fig. Remove the thermostat


Hope helps (remember rated this)

Feb 05, 2010 | 2004 Chevrolet Cavalier

1 Answer

Where is thermostat location for 2005 Dodge...


2005 Dodge stratus? With 2.4 DOHC, 2.4 SOHC, 2.7 V^, or the 3.0 V6?

Mar 07, 2009 | 2003 Dodge Stratus

1 Answer

Where is thermostat location for 2003 Dodge Stratus, dohc, 4 cyl


Right under the radiator cap. Remove the 2 bolts and the hoses on the housing and there it is. Please rate me!

Jan 27, 2009 | 2003 Dodge Stratus

Not finding what you are looking for?
2004 Lincoln Aviator Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...