Question about 1998 GMC Safari

1 Answer

Rear door lock will not release - 1998 GMC Safari

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Well this outa be either a bad latch or bad actuator or door lock motor, and rare instances but logic either blown fuse or loose or bad relays make sure u check that this are ok before replacing any.

Posted on Dec 30, 2012

Testimonial: "well that went first..then the other door locks"

  • doug schunick Dec 30, 2012

    won't realease the rear rwindow, so can't open the doors

  • angel alfaro
    angel alfaro Dec 30, 2012

    if u got the tools and effort to go through this then u need a test light to check that all ure fuses are good, if they are check all ure door controls to check if they all are working, and 3rd how many doors work with each of them, last would be dissasembly

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 VW GOLF REAR door wont open


The rear door lock actuator has failed in the door locking unit this is a common problem you can manually unlock the door to replace the latch if you didn't have the deadlocking on if you cant try pressing the locking button twice so when the car is locked the flashing red light is not blinking ie off on the drivers. Doing this usually causes the faulty lock to release the dead locking so you can pull the inside handle to unlock the door.

Oct 13, 2016 | 2003 Volkswagen Golf

1 Answer

Fuel door won't open on a 2008 g8 pontiac


Fuel Fill Door Description and Operation
The fuel door latch actuator shares the circuit with the driver door latch assembly. The body control module (BCM), upon receipt of a lock switch lock or unlock signal, will switch the appropriate door lock actuator, as well as a fuel filler door release actuator control circuits to battery positive voltage. The opposing side of the door lock and fuel filler door release actuators is connected to ground by the I/P fuse block through the other door lock actuator control circuit and the doors, along with the fuel filler door release, will lock or unlock as commanded.
Circuit/System Testing
  1. Ignition OFF, disconnect the harness connector at the fuel door release actuator.
  2. Test for less than 1 ohm between the control circuit terminal 1 and ground.
  3. ?‡'
    If greater than the specified range, test the control circuit for a short to voltage or an open/high resistance.

  4. Test for less than 1 ohm between the control circuit terminal 2 and ground.
  5. ?‡'
    If greater than the specified range, test the control circuit for a short to voltage or an open/high resistance.

  6. Connect a test lamp between the control circuit terminal 1 and control circuit terminal 2.
  7. Ignition ON, command the doors to LOCK and UNLOCK by using the door lock switch. The test lamp should illuminate while commanding the LOCK and UNLOCK states.
  8. ?‡'
    If the test lamp remains OFF during either command, test either control circuit for a short to ground.

  9. If all circuits test normal, test or replace the fuel door release actuator.
Component Testing
  1. Ignition OFF, disconnect the harness connector at the fuel door release actuator
  2. Install a 15A fused jumper wire between the control terminal 1 and 12V. Momentarily install a jumper wire between the control terminal 2 and ground. The fuel door release actuator should perform the LOCK/UNLOCK function.
  3. ?‡'
    If the function does not perform as specified, replace the fuel door release actuator.

  4. Reverse the jumper wires. The fuel door release actuator should perform the UNLOCK/LOCK function.
?‡'
If the function does not perform as specified, replace the fuel door release actuator.


Remove the rear compartment side trim (right) panel. Refer to
Rear Compartment Side Trim Panel Replacement .

Apr 06, 2016 | Pontiac Cars & Trucks

1 Answer

How can i access my trunk in my 2006 impala if my battery is dead


Rear Compartment Lid Release
The rear compartment lid can be released by depressing the rear release button in the glove box or holding either front power door lock switch to the unlock position for a minimum of 2 seconds or by pressing the rear compartment release button on the key fob. The transmission must be in the PARK position for the rear compartment to release. No Key lock on the trunk ?

Dec 07, 2015 | 2006 Chevrolet Impala

1 Answer

How to open a deadlocked rear door.


Hi. remove the rear seat and door pad. You can access the lock through a small hole, break the top inner corner of the lock and it will release the dead lock and open the door.

Jan 29, 2014 | 2004 Volkswagen Golf

1 Answer

How to open a deadlocked rear door


Remove the seat and door pad. You can access the lock through a small hole. Break the top inner corner of the lock to release the dead lock and open the door.

Jan 24, 2014 | 2004 Volkswagen Golf

1 Answer

Buick 2002 LaSabre Custom all windows do not go up and down, door lock/unlock switch drivers side does not work(passenger & rear doors lock/unlock door switches work, trunk release button does n


coulb be the control switch on your panel you can take the door panel off and check for loose connections and try to test for continuity. if you dont know how take it to a shop and have them diagnose the electrical. im quite sure it the switch that burnt out

Oct 24, 2012 | 2002 Buick LeSabre

1 Answer

X-Type Jag 2002 off side rear passenger door will not unlock. Cant open from inside or out.


Your rear door lock lever rod seems to have come off and is therefore not releasing the lock. You will have to open the inner door opener lever and try to somehow reach the place from where our lever rod has come off, manually release it, open the door, its inner door panel and put the rod back in its proper place.

Apr 07, 2012 | Cars & Trucks

1 Answer

Need to remove left rear door panel


  1. If equipped, remove the window crank handle by using a retaining clip removal tool.
  2. Remove the door handle bezel by inserting a flat trim removal tool between the door panel and handle bezel to release the locking tabs.
  3. Remove all door panel electrical connectors .
  4. Remove the door panel push pins and trim screws. Lift the door panel up and out to release the door panel locking tabs.

May 22, 2009 | 2006 Chevrolet Silverado

1 Answer

Rear door won't open


this is fairly common i,m afraid and there is no easy solution.:(......the lock mechanism siezes up you can try banging the door just below the hanldle while you cycle the central locking it sometimes releases it,otherwise you have to pull door panel off and then remove window regulator with the door stuck shut.then you need to basically destroy the lock with a hammer and bar to get it to release.this is not a easy job .i would recomend vw specialist or main dealer.sorry to be the bearer of bad news.hope you get on ok.

Feb 02, 2009 | 1996 Volkswagen Passat

1 Answer

PROGRAMING ALARM REMOTE ON 95 TAHOE


Here it is straight from Alldata:
  1. Ground pin G of the Data Link Connector (DLC).**Bottom left pin**
    • Receiver will respond by locking, and unlocking doors within 2 seconds.
  1. Press any button of the first transmitter to be programmed.
  2. The control module will respond by locking/unlocking doors and activating rear window release.
  3. Press any button of the second transmitter to be programmed (if used).
  4. The control module will respond by locking/unlocking doors and activating the rear window release.
    1. Remove the ground applied to the reprogrammed connector.
      1. Transmitter operation is verified locking and unlocking the doors and activating the rear window release

Dec 23, 2008 | 2007 Chevrolet Malibu SS Sedan New Cars

Not finding what you are looking for?
1998 GMC Safari Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...