Question about 2002 Chevrolet Silverado 2500HD

1 Answer

Power mirror/switch problem?

Ok so i bought some new tow mirrors for my truck and had them about 5 to 6 months all of a sudden both mears only move to the left and up and i thought they both might be bad so i put the old factory ones back on and did the same thing what would this be? cant be the fuse because its getting power i was thinking have to be the swich inside the truck because nothing was wrong with my old mirrors just wanted to upgrade to bigger ones so any help is great thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 660 Answers

Sounds like the switch itself to me.

Posted on Dec 30, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: replaced the power mirror switch on my 99

its the switch the remote part is bad the pad that you roll around is no good replace it

Posted on May 05, 2009

  • 33 Answers

SOURCE: My 1998 s10 has power mirrors work sometimes

Check with VOM (volt ohm meter) 3 to 5 bucks at harbor freight.
...with current connected check voltage at each pole of switch while pushing in the respective direction.
...Can also try electrical contact cleaner spray into switch as a potential quicky test/solution---often the contacts get arc residue/resistance.
..if replaced the mirrors then you know where the wiring harness connector is, and can check the voltages on each pin while moving the switch--thereby seeing which pin is generating something and which is pole/switch position is doing nothing (if connector is more accessible than switch blade connectors.

Posted on Aug 09, 2009

tuckers68
  • 60 Answers

SOURCE: Map lights and power door locks stopped working -2001 Chvy Camaro

sounds like you fried a relay ,, and will have to see a tech. for this ,, someone you trust and is ASE cert. in Auto electrical specialist

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is mirror wiring for plugins?


Installing 08 mirrors on 01 Superduty, looking for wiring diagrams ...

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Aug 12, 2008 - Installing 08 mirrors on 01 Superduty, looking for wiring diagrams Super Duty ... 2013-2014 mirror plug pin outs, SUPERDUTY_08, Super Duty ... Power/Heated/Lighted Tow Mirror upgrade...
Jul 24, 2012
F250 Paddle to towing mirror installation
Dec 20, 2010
Towing Mirror Wiring Harness Adaptor
Sep 15, 2010
Towing mirrors
Apr 16, 2010
More results from www.ford-trucks.com

Nov 19, 2015 | 2000 Ford F350 Super Duty Super Cab

1 Answer

How d I swith passenger side mirror on a power mirror on a 2004 Jeep Grand Cherokee limited edition


no symptoms posted (broke glass or ???) can we be on same page?
"how do I switch," verb switch , the mirror as switches inside, too.

please say what that word means. switch and the failure.
1: remove and replace with new.
2: move right to left and left to right side.

why would you do that #2
fold away mirrors/ Export only (this is usa forum so..)
these,NASA grade mirrors are very complex... not just glass and plastic. heaters ,motors, memory , etc.

the FSM cover all tests for the mirror, including scan data.

ill quote the FSM now , 8 steps (just 1 fail,not heat, not memory failure or fold failure)
ONE MIRROR INOPERATIVE
(1) If the one inoperative mirror is on the passenger
side, go to Step 2. If the one inoperative mirror is
on the driver side, go to Step 3.
(2) Check if the passenger front door will lock and
unlock using the power lock switch on the driver side
front door. If OK, go to Step 3. If not OK, go to Step 6.
(3) Disconnect and isolate the battery negative
cable. Remove the trim panel from the front door.
Disconnect the 12-way mirror wire harness connector
from the door wire harness connector.
(4) Using two jumper wires, test the mirror as
shown in the Mirror Test chart (Fig. 2). If the mirror
tests OK, go to Step 5. If the mirror does not test
OK, replace the faulty mirror.
(5) Disconnect the 12-way door wire harness connector
from the door module connector receptacle.
Check all of the circuits of the door wire harness
between the connector for the mirror and the connector
for the door module for opens or shorts. If all of
the circuits are OK, replace the faulty door module.
If any of the circuits are not OK, repair the open or
shorted circuit(s) as required.
(6) Use a DRB scan tool and the proper Diagnostic
Procedures manual to test and repair the faulty Programmable
Communications Interface (PCI) data bus
communication between the two door modules.

(bar stool answer) all cars. mostly
pull door skins
unplug motor conn.
unscrew mirror base from door.
extract mirror,

Mar 07, 2015 | 2004 Jeep Grand Cherokee

1 Answer

Side mirror replacement


Fixya does not sell mirrors and covers.

Aug 01, 2017 | 2010 Hyundai i20 1.4i

1 Answer

Memory seats adjust on there own as well as mirrors


BCM has nothing to do with this function , MMM - memory mirror module !
Memory Mirror System Operation
The MMM is capable of storing mirror position for 2 different drivers. Mirror position is determined by both horizontal and vertical position sensors in each of the power mirrors. The MMM supplies a reference voltage and a low reference to these sensors and determines mirror position through the horizontal and vertical position signal circuits.
The MMM receives power through the battery supply voltage circuit and the MIR/LOCK fuse and a constant ground source. Any time that battery voltage is disconnected and then connected from the MMM, the MMM will enter the mirror relearn mode. The mirror relearn mode can also be commanded using a scan tool. Refer to Memory Mirror Module Learn for further information.The memory switch receives power through the battery supply voltage circuit and the MIR/LOCK fuse. The MMM upon receipt of a memory switch signal input, a class 2 message from the SIC or a class 2 message from the PCM indicating that the transmission is in park, will then supply battery voltage and ground to the appropriate power mirror motors through the mirror motor control circuits to move the mirrors to the predetermined positions.

DTC B1586, B1596, B1616, or B1626
The mirror horizontal and vertical position sensors are potentiometers. The Memory Mirror Module (MMM) provides these sensors with a 5 volt reference circuit and a low reference circuit. The MMM monitors the horizontal and vertical position sensor signal circuits which change values based on mirror position. These voltage values are used to determine mirror position and can be set into memory. When the MMM receives a memory recall request, the MMM will control the power mirror to the memory position based on the horizontal and vertical position sensor signal values.

Install a scan tool.
Turn ON the ignition, with the engine OFF.
With the scan tool, observe the mirror horizontal and vertical position parameters in the Memory Mirror Module (MMM) data list.
Operate both the left and right mirrors through the full range of movements.
Does the scan tool indicate that the left and right mirror horizontal and vertical position parameters are within the specified range?

Memory Seat System Components
The memory seat system consists of the following components:
• Power seat switch assembly
• Memory recall switch assembly
• Horizontal adjuster motor
• Front vertical adjuster motor
• Rear vertical adjuster motor
• Recline adjuster motor
• Memory seat module
• Memory mirror module
• SEAT 25A circuit breaker
• MIR/LOCK 3A fuse

Your best bet , take it to a qualified repair shop !

May 23, 2017 | 2002 Cadillac Escalade

1 Answer

Right side power mirror on silverado hd 2500 will not move out


are you referring to the power camper mirrors that adjust out for towing? if so you can try and move out manually by pulling on it this may free up the stuck motor if that doesnt work will need to replace mirror

Mar 07, 2011 | 2005 Chevrolet Silverado

1 Answer

2001 explorer sport trac side mirros not working"


did you check power mirror fuse? if ok, remove your power mirror switch at the driver side and clean the contact area, take a test light and check all wires for good connection. one by one test the voltage output,-/+ by pressing the switch, if all wires have output -/+ , and mirrors still not working, remove the switch connector, find out the three wires going to power mirror and direct it to - and positive voltage alternately, if the mirrors move, repair the wire that cut on the moving area, if still not moving repair or replace the two motors inside the mirror

Jul 13, 2010 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

Mirror replacement


you can replace the mirrors with the standard power mirrors

Sep 19, 2009 | 2004 Nissan Titan

1 Answer

2005 Ford F-350 mirror installation


It sounds like you bought the wrong year mirrors. Yes you could cut the connector off you old mirror but you would have to know the wiring for the mirror not the truck.

Apr 12, 2009 | 2005 Ford F 250 Super Duty

1 Answer

2005, F150 Power mirrors not working


try the 10 amp fuse or even the 15 amp,good luck

Mar 08, 2009 | 2005 Ford F-150

1 Answer

Side view mirrors


the 4 buttons around that switch are the ones you press to move the mirror. to adj the drivers mirror, move the switch to the left, to adj the passenger mirror, move it to the right.

then you press one of the 4 buttons

Jul 21, 2008 | Hyundai Motor 2002 Sonata

Not finding what you are looking for?
Cars & Trucks Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...