Question about 2002 Jeep Grand Cherokee
Where is it located and how do i replace it
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
On many of these, the drain is on the right front of the radiator, sometimes requiring removal of a small panel in the grille or the entire grille. The ones I've serviced, after geting to the drain I've found that it dosen't turn. It is far easier to ignore the drain altogether and remove the lower hose at the radiator. Don't do this on a hot engine unless you like hot antifreeze baths! (I don't)
Posted on Mar 21, 2009
More than likely you have a bad ground. Under the rear of the vehicle, behind the rear bumper there will be a few wires running to a bolt in the frame (left side i think) Check that no wires are loose or boken. Also if you have a trailer wiring harness, check to see if it has not been damaged. Let me know if this helps :)
Posted on Apr 30, 2009
You can adjust the switch by putting your thumbs on either side of the switch plunger and pushing toward the brake lever. The switch shaft will ratchet into the new position which is will then be depressed by the brake lever when it is the brake is not being depressed.
Posted on Jun 23, 2009
Tips for a great answer:
Sep 02, 2014 | 2002 Jeep Grand Cherokee
Dec 30, 2012 | 2002 Jeep Grand Cherokee
Sep 07, 2010 | 2002 Jeep Grand Cherokee
Mar 27, 2010 | 2000 Jeep Grand Cherokee
Mar 11, 2010 | 2000 Jeep Grand Cherokee
Feb 20, 2010 | 2000 Jeep Grand Cherokee
Jan 22, 2010 | 2002 Jeep Grand Cherokee
Jul 30, 2009 | 2002 Jeep Grand Cherokee
Sep 24, 2008 | 2002 Jeep Grand Cherokee
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: