Question about 1993 Volvo 940

Open Question

Reset check engine light for Volvo 1993 940

I have 1993 Volvo 940 turbo . The check engine light just true on The car rpm will not stay 1 mark. Wen I put the car in d . Car will not . Rpm will not stay at the 1 mark.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Engine management light

my car volvo s40 2000 had problem with engine managment light. I took it to the garage & they did dignostic check and the problem was(reset the camshaft valve)he gave me the part nomber and i put new part in ad problem solved.i do not know the name of part but this part is next to the spark plugs on right hand side,its got 4 bullts and the wire pluged in to it. It might be not problem with your car becaus macanic told me that this is not the common foult with s40, with yor car it may be sensor. good luck

Posted on Jul 28, 2008

  • 1 Answer

SOURCE: engine management light volvo s40 problem

The best thing is to go to your local Volvo maintenance shop or Volvo experts to find out whats the problem..usually the coomon ones I think is the programs inside its ECU unit..you try this..ask the volvo experts to reset the ECU and lets see..if problem arise then it is no doubt you might need the sensor..hope this help..

Posted on Nov 03, 2008

  • 4 Answers

SOURCE: 76 volvo 240 car idles and low speed is rough,

It could be the filter. Has the fuel been changed after storage? I would also thing the Carburetor or the fuel injectors might need to be cleaned.

Posted on Dec 19, 2008

onyeredson
  • 404 Answers

SOURCE: car will start but won't stay running

Hi!
I'm presuming the B23 engine? Have you checked fuel pressure valve located on the inlet manifold, are your plugs getting soaked in fuel?
If not try looking at the Fuel relay in the block situated behind the ash tray below the Radio.
It might be easier for you to access this by taking out the coin tray, flip the cover plate off the cigar lighter it will reveal 2 screws, take that out and the tray then you'll see a whole lot more relays.
There are different types/colours I'm guessing your could be Blue but there are white ones too.Try Jiggling them carefully then crank the engine if it runs but poorly replace.
You must replace with correct one even if it is Blue some have Copper Lugs others steel and they are different.
Good Luck!
Paul 'W'

Posted on Jan 05, 2009

  • 1 Answer

SOURCE: reset check and service engine lights

It's in the console under the coin holder, in front of the gear shifter. You have to remove the coin holder and you will see it.

Posted on May 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should the timing setting be at on a Volvo 740


For a 1990 Volvo 2.3 SOHC B230 at 700-800 rpm 12 degrees
at 2500 rpm 21 degrees plus or minus 1 degree

For a 1990 Volvo 2.3 DOHC 15 dergrees BTDC

For a 1990 Volvo SOHC turbo same as SOHC specs

Jun 05, 2011 | 1990 Volvo 740

1 Answer

Use 1st turbo n 1st gear then change nd theaz no boost tl 2nd turbo 2nd gear no power.check engine light cums on wen start the car and turbo timer dosnt work


CODE SCAN VECHICLE TO SEE WHAT CAUSING CHECK ENGINE LIGHT TO COME ON.SOUND LIKE TURBOCHARGER REGULATATING VALVE AND ECM PROBLEMS.

Feb 01, 2011 | 1999 Subaru Legacy

1 Answer

Hello.I got my Volvo s40 2002.Its suppost to have a turbo build-in.But I cannot feel the difference,basically when is turbo starts working?Thanks!


The S 40 came with different size and spec engines and they were not all Turbo charged versions. The choice of engines available depends on which country you are in.

The turbocharger is driven by the engine's exhaust system and runs continuously but has minimal affect at low engine RPM. Unless the turbo has failed, you should feel the turbo effect kick in when you accelerate hard but there will be a brief lag .

If you have the turbo engine fitted to your 2002 model S40 you will have a " 1.9T " badge on the rear of your car under the S40 badge. The "T" designates Turbo. An engine designator badge without a "T" indicates it is not turbocharged.

The turbochargers on these S40 models will fail (especially if the car has done a lot of miles) so you should have your car examined if you feel the turbo is not functioning.

Dec 18, 2010 | 2002 Volvo S40

3 Answers

Can i replace a volvo s40 turbo engine with a regular non turbo volvo s40 engine. my mechanic says he can install the turbo from the toasted turbo engine on the non turbo engine but that he will have to...


tHIS WILL TURN ON AND KEEP THE CHECK ENGINE LIGHT ON, MOST OF THE ENGINE BLOCKS ARE THE SAME BUT ARE BUILT A LITTLE STRONGER TO WITHSTAND THE TURBO, IF HE CONNECTS THE TURBO AND YOU DONT BEAT ON THE MOTOR I THINH YOU WILL BE OKAY, HAVE HIM USE ALL THE OLD PARTS LIKE INTAKE INJECTORS OIL PAN EXHAUST MANIFOLD AND I THINK IT WILL BE FINE, HOPE THIS IS HELPFUL,

Oct 25, 2010 | Volvo S40 Cars & Trucks

1 Answer

Ignition timing specs for a 1988 volvo 760 turbo wagon ?


It is most likely going to be between 5 and 15 degrees BTDC. I would put it at 5 degrees BTDC. At idle, if the motor is extremely quiet, but the exhaust loud, move it to 10. As you advance the timing, the motor should become louder and the exhaust quieter (at idle). As you increase RPMs, the motor should get quieter and the exhaust louder. This is only true with an injector pump that has static timing (does not automatically increase with increased RPM).
If your engine has dynamic timing (automatically advances with increased RPM), then I would set the timing at 5 degrees, test run. Maybe change to 7 degrees, test run...etc. Basically, don't make dramatic changes with the injector pump timing if it is dynamic. I hope this helps.

Apr 30, 2010 | 1988 Volvo 760

1 Answer

Wen I push it a little more then normaly, de yelow motorlamp goes on. ist happand on about 150 km/h. and 3000 rpm.


If the light goes on and keeps flashing, then it's detecting a misfire in your engine. If the light goes on and stays solid, then it could be anything. If you take your car to a place like Autozone(free) and have it scanned, they'll be able to retrieve the codes that will narrow down what the issue is

Sep 15, 2009 | 1998 Volvo S70

1 Answer

91 volvo stalls at anytime


TRY ANOTHER FUEL PUMP AND FUEL FILTHER THESE PUMPS ARE FUNNY ON VOLVOS HAD SAME PROBLEM ON 850 TURBO AND SURE ENOUGG IT WAS THE PUMP

Apr 11, 2009 | 1991 Volvo 940

2 Answers

Volvo 940 GL 1995 Soft Turbo


First check for holes or disconnected air inlet hoses, that will give the sensor/meter a problem so it cannot send the correct signal.

Jan 29, 2009 | 1994 Volvo 940

1 Answer

Check engine codes


1-2-3* Signal missing to/from coolant temp. sensor Wiring fault to or in ECT sensor;grounds corroded on intake manifold or engine Difficult to start engine when cold Same Same

Dec 23, 2008 | 1994 Volvo 940

Not finding what you are looking for?
1993 Volvo 940 Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...