Question about 2003 Chevrolet Suburban 1500

Open Question

2003 chevy suburban battery not charging - 2003 Chevrolet Suburban 1500

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2003 Chevy suburban engine dies while driving

the reason your truck is shutting off is because one of your o2 censors is bad. had the same problem even got a diagnostic done ans showed no error.finally went to advance auto and asked someone who had the same problem. hope is works out

Posted on Feb 07, 2009

  • 87 Answers

SOURCE: MY 2003 CHEVY SUBURBAN won't crank,showup on the

bad instrument cluster to reset oil light key on press gas pedal 3 times to floor in 5 seconds

Posted on Mar 10, 2009

  • 106 Answers

SOURCE: Changing CO2 Sensor on 2003 Chevy Suburban

check the whole exaust sestyem? there should be 4to5

Posted on Mar 19, 2009

  • 468 Answers

SOURCE: 2003 Chevy Suburban-replace alternator

Ok, Alternators are a breeze on these things. There are two bolts that hold it on, and 2 sets of wires. If you haven't taken anything apart yet, and the belt is still on it, here's what to do. You will want one of those rubber or elastic bungee cords, about 2 and a half feet long(this makes it easy). Hook that bungee cord to your hood somewhere, so that it hangs down. Hook the other end on the serpentine belt right next to the alternator pulley. If you need to prop the hood up with a stick or something to keep it up, do so. Pull up on the belt, and watch the pulleys. The one that probably has a plastic pulley on it that moves up and down(this is the tensioner) is the one that you'll put a deep well socket in the middle of with a ratchet, and turn counterclockwise. This will make the belt go loose. Now you can work the belt off the alternator pulley, and once you get it off, the bungee cord will keep it in place, so you don't have to look at the diagram. Otherwise, if it comes off, there is a sticker just under the hood either on the fan shroud or the radiator support that has the belt diagram. Now, you can disconnect the battery, pull the rubber boot down off the nut and post on the back of the alternator, remove the nut and wire, and then unhook the wire from the side of the alternator. Now, you can remove the two bolts that hold the alternator on. You Will need to pry the alternator off at this point, as it fits really tightly in place. A socket extension or a large flat screwdriver works really well for this. Once you get it off, put the new one on exactly as you took the old one off. Note, you will have to release your tension on the tensioner at some point; i just ease it down, or if I can pull it off, wedge it somewhere where it won't loosen very far. Remember, on the tensioner, you're not trying to take the nut off. All you're doing is using it to move the tensioner arm. That's all there is to this job. Sometimes it can be stubborn with the prying part, especially getting it into place. Hope this is what you're after, and if you need more info, leave a comment for me.

Posted on Feb 22, 2010

Testimonial: "Great advice on the bungee cord!! Well written advide and easy for a novice to follow. Thanks"

dj_relly999
  • 4070 Answers

SOURCE: I have a 2003 chevy

Hello and welcome to FixYa!

Two things to look at. Have the battery checked for it can be near the end of it's life span. It can be a faulty alternator issue to and I suggest that you have the alternator checked as well. You may need replacement if found out faulty.
Hope this helps and thank you for using FixYa! Have a good one!

Posted on Jun 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Something is draining my battery on my 2003 Chevy Suburban


check for grounded object/wire it really drained a battery the whole night.

Sep 19, 2013 | 2003 Chevrolet Suburban

1 Answer

My 2003 chevy suburban wont start i gave it a charge its making a clicking sound


could have faulty starter relay could have faulty starter solenoid or starter.

Oct 12, 2012 | 2003 Chevrolet Suburban 1500

1 Answer

Replace Throttle Position Sensor on my 2003 Chevy Suburban


Disconnect the wire connector to the sensor then remove the 2 screws and remove the sensor then put new one on and reset the computer with a code reader or a scan tool or take it to your local autoparts store (advance auto,autozone,ect.) and they can reset it for you at no charge to you.

Jan 20, 2012 | Cars & Trucks

1 Answer

My 2001 chevy suburban just went totally dead and wont start


Look at both of your battery cables to see if there is any built up corrision around the post. Next, check to see if your battery is charged and if it will hold a charge with a battery recharger

Feb 04, 2011 | 2001 Chevrolet Suburban

2 Answers

Chevy Suburban 1500 -- Battery Not Charging Light....Replaced Alternator....Still had battery not charging light....Replaced battery....Still have battery not charging light...also first time seen service...


Make sure that you buy a 'lifetime' warranted alternator from your parts source to avoid problems with bad alternators out of the box. I would try to return and exchange the alternator with one that tests out ok on a bench, in order to verify if the wiring in between the alternator or the alternator itself was bad.

Service brake booster would have to do with the vacuum or power booster problem around the master cylinder for the braking system. That wouldn't have anything to do with the alternator, I do not believe.

Good luck on these repairs.

Jan 08, 2011 | 2003 Chevrolet Suburban 1500

1 Answer

Have a 2003 chevy suburban. We turn the key, the


Battery is most likely shot, batteries are only good for about 3 yrs. Usually show signs of battery wear when the weather gets cold were it takes more juice to turn over your vehicle.

Oct 14, 2009 | 2005 Chrysler Pacifica

1 Answer

Changing CO2 Sensor on 2003 Chevy Suburban


check the whole exaust sestyem? there should be 4to5

Mar 19, 2009 | 2003 Chevrolet Suburban

1 Answer

MY 2003 CHEVY SUBURBAN won't crank,showup on the


bad instrument cluster to reset oil light key on press gas pedal 3 times to floor in 5 seconds

Mar 10, 2009 | 2003 Chevrolet Suburban 1500

3 Answers

2003 Chevy suburban engine dies while driving


You need to check the Ignition System. Plugs, Wires, Dist. Cap. If these are Ok, You Probably need to Check the Fuel Pump and Filter. Let me Know!

Jan 03, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
2003 Chevrolet Suburban 1500 Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...