Question about Ford Focus
Come to a stop on round about went to pull away but car had stopped tried to restart car but would not even turn over but all lighys are on dash stereo works everything
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Car loses power while driving
You must replace the distributor cap and rotor button- easy fix. Do not mix wires up. Message me I will guide you through it. definitely know my stuff here.
Posted on Nov 06, 2008
you are correct it is not "seeing" the disk with it's infared sensor to repair this sensor you must disassemble the radio
Posted on Apr 30, 2009
I wonder if your battery is really in an excellent shape. The way you described seem to be non sufficient voltage for the starter solenoid to engage completely. Make a quick observaton by leaving the headlight on while cranking the engine. If no significant drop on the headlight brightness. Then your battery is assumed to be good. (a cold crank voltage shouldn't below 10V) Then the remained items to work with is either the solenoid or the starter or both. I believe the solenoid is piggy pack on the starter. Most autopart stores would test it for free of charge.
Posted on Jun 04, 2009
your camshaft position sensor may be going bad. usually with an old car it tend to go bad. The top of sensor can be covered or gumed up with grease, oil, dirt and cause it not to detect the flywheel turning. Camshaft sensor send single to your DME to deliver fuel and sparks to you engine. If camshaft sensor goes bad it will seem like your fuel pump and ignition coil is bad even-though they are good. Faulty camshaft sensor may caused you to have this issue and problems such as sometime it run good and all of sudden it shut off, sometime its start good and others time is doesn't start. Once the sensor goes bad, the car will not run. There are two Sensor one for the fuel and one for the sparks, I would replace both sensor because soon or later if it will go bad, it will leave you stranded although if you replace one you might as well replace the other. Check the coil and test using the light or volts tester to see you getting power to the coil, next check if your fuel pump is working, fuel pump will not stay running unless the sensor sense the flywheel is turning from your camshaft sensor. next time when your car does not start, check if you getting spark and fuel. Both sensor will cost you around 130 bucks. assuming your DME, fuel pump, coil, wires, etc... is working. keep me update and I will try to walk you through. btw stop by at any auto part store and pick yourself up Haynes auto repair book for your car, its a great tools and investment to have for your next repair work if you plan to keep your car and get to know the heart of it. good luck and i hope that help some.
Posted on Jul 25, 2009
Tips for a great answer:
Aug 20, 2013 | Cars & Trucks
Sep 09, 2017 | 1999 Chrysler Sebring
Sep 02, 2010 | 1999 GMC Sonoma
Aug 09, 2009 | 2002 Mercury Cougar
May 03, 2009 | 2004 Chrysler PT Cruiser
Apr 20, 2009 | 1998 Buick Park Avenue
Jan 28, 2009 | 1998 Dodge Durango
Nov 19, 2008 | 1995 Plymouth Neon
Aug 26, 2008 | 1997 GMC Sonoma
Jul 05, 2008 | 2005 Ford Explorer Sport Trac
83 people viewed this question
Usually answered in minutes!