Question about 2004 Dodge Durango

1 Answer

I replace my starter and the relay and my 2004 dodge durango still will not turn over,, what else could it be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,101 Answers

Does the motor crank? if the cranks it is not the starter. you have a problem with fuel ,spark or air

Posted on Dec 30, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 170 Answers

SOURCE: My 2004 Dodge Durango will not start, battery is

theres wires that go to the starter that could have come loose. sometimes theres fusible links in those wires that go bad.
but most likely you have a bad fuse somewhere

Posted on Jul 31, 2010

  • 412 Answers

SOURCE: interior lights won't turn off

there is a recall on instrument cluster for dome light operation..consult your local dodge dealer

Posted on May 21, 2009

isaid
  • 302 Answers

SOURCE: 1999 Dodge durango 5.9 starter clicks but wont

pull starter back off but do not disconnect cables, then try key again, if starter spins use a large standard screwdriver to turn the flywheel through the starter mounting hole,if it doesnt move u have motor trouble

Posted on Oct 03, 2009

  • 1 Answer

SOURCE: durango trailer wiring left turn signal doesn't

I lost all of my trailer lights. Turns out the wires in the harness were corroded out by the gas tank. Dealer said it was a common problem

Posted on Apr 02, 2010

  • 47 Answers

SOURCE: location of 1999 dodge durango starter for

Its on the bottom of the engine on the passenger side next to oil pan

Posted on Aug 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Dodge Durango has a brand new battery and starter. It also has a security system on it. Everything works it just won't turn over. What can I do?


Sounds like the immobiliser is working well. You have to tape a key near the ignition switch when you have a remote starter installed.

Aug 12, 2015 | 2004 Dodge Durango

2 Answers

Starter clicks but will not turn engine over on 2004 Dodge Durango. New starter and battery.


Hi Mark
Sounds like you are doing all the right things.
We used to Load Test a Starter Motor by putting it in a Large Vice and connecting a known good battery with solid fat jumper leads.
When the solenoid throws the cog forward to engage we would use a 2 by 4 block of wood levered against the cog to try and stop the starter from spinning. The wood burns up under load but it quickly proves the Starter is functioning under load. Without using the engine.
Also you could try removing the spark plugs on the engine to allow the compression to escape. Make sure NO sparks around to ignite any fuel vapor.
The engine should spin over easily like this and you can hear & see if anything is binding up.
Hope this Helps!
Good luck!

Mar 03, 2015 | 2004 Dodge Durango

1 Answer

98 durango will not start good abttery and starter also starter relay is new


Hi queenshit200, I'm glad to help!

First you must make sure you have power from the ignition switch to the ASD Relay. Using a test light, turn the ignition switch to the on position and see if you have power at the relay, if the test lights up when you turn the key on and turns off when you turn the ignition off then it is OK from the ignition switch to the relay. NEXT, you must have battery power to the relay at all times, if you do then that circuit is OK. NEXT: make certain you have a good ground on the body of the vehicle and the engine. Also make sure you have a good power too power connection at the junction where the power wires meet together. If all that is OK, then you'll need to know if the Engine Controller is seeing something it doesn't like. OR it's possible the CRANK SENSOR or something else may be bringing down the BUS CIRCUIT. Unplug one thing at a time and see if it starts. If it does after unplugging that sensor or part then that's what you must replace to fix it. Hope this helps and have an awesome day.

May 05, 2012 | 1998 Dodge Durango

1 Answer

My 2004 Dodge Durango will not start, battery is good the starter sounds good it just won't turn over? It happened after running good the entire morning.


theres wires that go to the starter that could have come loose. sometimes theres fusible links in those wires that go bad.
but most likely you have a bad fuse somewhere

Jul 31, 2010 | 2004 Dodge Durango

1 Answer

How difficult is it to replace a 2004 Dodge Durango Starter?


this should not be difficult. Look under the vehicle near the transmission. on the bettom of the engine block will be sticking out the starter. 2 bolts and it will slide out. Replace with the new starter. You may need to jac up the vehicle or use car ramps to have enough room under the vehicle

Jan 29, 2010 | 2004 Dodge Durango

1 Answer

I have a starting problem problem with my 2006 dodge durango. this problem does not happen at all attempts to start but when it happens i get a clicking sound and have toget the truck boost started. i had...


It sounds like your starter solenoid (relay) is failing. The clicking is a classic symptom. It's time to have it replaced.

A starter solenoid (or starter relay) is the part of an automobile which relays a large electric current to the starter motor, which in turn sets the engine in motion .In many vehicles the solenoid also engages the starter pinion with the ring gear of the engine.

The starter solenoid receives a large electric current from the car battery and a small electric current from the ignition switch. When the ignition switch is turned on, a small electric current is sent to the starter solenoid. This causes the starter solenoid to close a pair of heavy contacts, thus relaying a large electric current to the starter motor, which in turn sets the engine in motion. The starter motor is an electric motor that initiates piston motion in a car's internal combustion engine before it can power itself.

Oct 27, 2009 | 2005 Dodge Durango

1 Answer

1999 Dodge durango 5.9 starter clicks but wont turn over replaced starter/battery good as well as the starter relays


pull starter back off but do not disconnect cables, then try key again, if starter spins use a large standard screwdriver to turn the flywheel through the starter mounting hole,if it doesnt move u have motor trouble

Oct 03, 2009 | 1999 Dodge Durango

1 Answer

2004 dodge durango courtesy lights.


See http://autos.msn.com/research/vip/reliability.aspx?year=1998&make=Dodge&model=Durango . Under "Brakes". It's probably the Rear Axle Speed Sensor. Easy Fix. Do-It-Yourself. Search this site or Google "Replace rear axle speed sensor 1998 Durango"

Oct 01, 2008 | 2004 Dodge Durango

Not finding what you are looking for?
2004 Dodge Durango Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...