Question about 2000 Mercedes-Benz S-Class
Lights on dash turn on, but wont turn
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try checking the brake light sending unit. Are your brake lights even working. Many newer vehincles will not shift out of park unless the brake pedal is depressed. However, a faulty sendind unit located on the pedal itself can keep you from moving anywhere. Just check to see if your brake lights are working to know if the sending unit is working.
Posted on Apr 30, 2009
SOURCE: a/c fans wont blow
If the fuse is blown for the blower then there is a short, that is not an answer, go to the blower and check to see that the blower motor connector has 12 volts to it when the blower is set to high speed on control, if it does then u need a new blower motor, if it doesn't then the control switch is defective or the blower motor speed control resistor is defective.
Posted on May 13, 2009
I'm no expert, but I have had a similar problem. A friend told me to turn the key in the ignition 7 times consecutively and it will reset. I tried it and it worked bad news was it was only for about a hundred miles or a few starts. In otherwords it is not a fixall.
Posted on Jul 16, 2009
is check engine light on or visit workshop displayed on cluster while engine is running. If so there is a electrical malfunction-although if the linkage is disconnected from the trans to the throttle the gear recognition switch would send an implausible signal and set a code. this code is not a priority code and may not set the light right away. A lot of times one of the linkage rod retaining clips falls off. Look under the car and you will see a rod that attaches to the shifter box arm and to the transmission neutral safety switch(manual valve) arm. It may actually be resting on the ground. If not look and make sure it is secure. Next there is a slot on the shifter wood where you can put a flat blade screw driver in and release the manual shifter lock. Your owners manual will describe how to do this. Depending on what failed the vehicle may be in what is called limo home mode where the trans does not shift out of second gear and the throttle is not very responsive. It will give you the opportunity to move the car to a safe location possibly even a repair shop. The shifter boxes are are a sealed unit with no replaceable parts. They are slightly expensive and require an s.d.s. machine to replace because they must be programmed and version coded. I hope I have been helpful
Posted on Jul 31, 2009
Check the underside of your hood for a belt diagram. If it's not there, call your dealer with your VIN number to get the correct diagram.
Posted on Sep 20, 2009
Tips for a great answer:
Aug 12, 2014 | Mercedes-Benz E-Class Cars & Trucks
Jul 30, 2014 | 2003 Mercedes-Benz S430
Jul 29, 2014 | 2003 Mercedes-Benz S430
Jul 15, 2012 | 2000 Mercedes-Benz S-Class
Feb 03, 2011 | Mercedes-Benz S-Class Cars & Trucks
Jun 08, 2009 | 2001 Mercedes-Benz S-Class
May 13, 2009 | 2000 Mercedes-Benz S-Class
Dec 03, 2008 | 1999 Mercedes-Benz CLK
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: