Question about 2005 Dodge Stratus

Open Question

How do i remove a wiper arm on dodge stratus - 2005 Dodge Stratus

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Windshield wiper arm disconnected

My dad helped me solve this problem on my truck...

They simply pry off. He put down a towel to protect the cowl grill, took a hammer (using the split end) and pried them right off.

There was no mechanism holding them on, when we were done working under the grill, we used the same towel, but the other side of the hammer to stick 'em back on.

Posted on Mar 30, 2009

polarcycle
  • 1392 Answers

SOURCE: How to remove rear wiper arm

Remove the nut holding the arm. Should be able to lift up on the arm and loosen the joint at the motor.

Posted on May 30, 2009

  • 151 Answers

SOURCE: Can't remove rear wiper to replace on 96 caravan

Lift wiper arm from rear window. then release latch that holds the blade to the wiper arm.( It's small tab)

Posted on Jan 27, 2010

emissionwiz
  • 75108 Answers

SOURCE: How to remove wiper arm from 1987 Dodge pickup

lift the wiper arm up, at the arms head where it sits over the drive post look for a small tab, take a pocket screwdriver and move this tab outward, then wiggle the wiper head to remove, they can be really hard to get off.

Posted on Feb 26, 2010

  • 11 Answers

SOURCE: how to remove CV Joints on a dodge stratus

REMOVE your whelland tire on the side that you want to make to fix, removed your brake caliper and attach it with a piece of wire to the suspention strut ,remove the part that hold the caliper,remove the bolt or the nut that hold the lower balljoint in your lower suspention arm to your stering kuckle,and separate those two parts with a long pry-bar or a suspention fork and hammer,remove your disc brake,loose the spindle nut from the axle(this big nut is in the center of whell and if you are not working witch an air impact tool loose it right after removing your whell cap before removing the whell this is a high torque on it be sure to tight it correcly when yuo ins tall it)and pull the suspension strut foward you to removed the axle from the stering kuckle take apry-bar put it betwen the transmission and axle and pry it out some trans mission fluid may leak installation is reverse.

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiper arm dislocated at the base


The wiper blades sometimes are frozen to the windshield. If so turning the wipers on can cause it to come apart. You have a ball and socket connection. Normally a pear of Channel lock pliers are what you need, depending on your access. Just pop it together. And remember to loosen your wipers off from the windshield prior to getting into your car.

Feb 04, 2013 | 1999 Dodge Stratus

1 Answer

Tengo un stratus 99 que esta fallando el sistema electrico


The windshield wipers don't work at all or you can hear the motor running but the wiper arms do not move?

Jul 29, 2012 | 1999 Dodge Stratus

1 Answer

Need to check windshield wiper motor and its removal on 1989 dodge dakota pickup


Remove Wiper Arms,Metal Grill, Nut on Motor Arm,3 Bolts holding wiper motor.
Dealer has a reman. About $59.00
Remove mounting plate from yours. 3 bolts,turn in old core at dealer

Nov 23, 2010 | 1987 Dodge Dakota

1 Answer

Driver side wiper dont work


vehicle may have a stripped wiper arm.( remove wiper arm,turn on wipers & see if splined knob is moving ),if so turn off wipers & replace wiper arm.or if knob does not move then have to remove cowel & check linkage to wiper transmission!

Sep 13, 2010 | 1992 Dodge Caravan

1 Answer

How to remove wiper arm from 1987 Dodge pickup


lift the wiper arm up, at the arms head where it sits over the drive post look for a small tab, take a pocket screwdriver and move this tab outward, then wiggle the wiper head to remove, they can be really hard to get off.

Feb 26, 2010 | 1987 Dodge Pickup 2WD

1 Answer

Can't remove rear wiper to replace on 96 caravan


Lift wiper arm from rear window. then release latch that holds the blade to the wiper arm.( It's small tab)

Jan 16, 2010 | 1996 Dodge Caravan

1 Answer

How do you adjust the windshield wiper arms on a dodge grand caravan


There are no adjustments on the wipers. The arms come off to realign. Pop the wiper arm cap off with a very small flathead screwdriver theres a liitle opening slot to do this. Remove the nut. Pull wiper off straight, use pulley if needed. If the tenson is gone in the wiper arm replace. The springs go bad in the rear arm from dirt.

Dec 02, 2009 | 2005 Dodge Caravan

1 Answer

How to remove rear wiper arm


Remove the nut holding the arm. Should be able to lift up on the arm and loosen the joint at the motor.

May 29, 2009 | 1996 Dodge Caravan

1 Answer

Bad wiper motor on 1996 dodge grand caravan


According to the Haynes repair manual Chapter 12:

1. Disconnect the negative battery cable
2. Detach washer hoses, lift the wiper arm covers and mark the wiper arm locations on the pivot shaft for later re-installation. Remove the wiper pivot nut and remove the wiper arms.
3. Remove the cowl cover (from chapter 11)
3a. Remove the wiper arms then remove the screws that hold the lower area of the cowl cover to the wiper module.
3b. Disengage the quarter turn fasteners that hold the outer ends of the cowl cover to the wiper module.
3c. Open the hood and release the wing nuts that hold the front of the cowl cover to the wiper module.
3d. Close the hood but do not latch it. Now remove the outboard screws and lift the cover up enough to get to the washer hose.
3e. Disconnect the washer hose from the right washer nozzle. Close the hood but do not latch it. Lift the cowl cover toward the windshield and off the vehicle.
3f. Installation is the reverse of removal
4.Open the hood. Disconnect the wiper motor electrical connector.
5. Disconnect the windshield washer hose from the coupling inside the unit. Disconnect the drain tubes from the bottom of the wiper unit.
6. Remove the wiper unit mounting bolts. (Picture appears to be three (possibly allen head) bolts)
7. Remove wiper unit.
8. Installation is the reverse of removal. Wiper blade and wiper arm adjustment is measured with the wipers parked; correct adjustment is the lower wiper arm approximately 1.5 inches distance from the cowl cover and the upper arm approximately 2.5 inches from the lower arm. Operate the wiper motor and check that the wiper motor parks when the wiper switch is OFF.

Mar 21, 2009 | 1996 Dodge Grand Caravan

2 Answers

93 Dodge 350 Van


There is a little hook like metal piece under your windshield wiper arm.When you push it to the right while pulling the wiper arm up it comes off

Oct 13, 2008 | 1993 Dodge Caravan

Not finding what you are looking for?
2005 Dodge Stratus Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...