Question about 2007 Chevrolet Colorado (Extended Cab) New Cars

Open Question

Finding oil dipstick chevy colorado

Finding oil dipstick

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: dipstick

if it is the 2.2 L motor it is right in the front of the engine just about center.

now just incase your looking for tthe transmission dip stick, on certain transmission models there is no dip stick for the transmission. it is sealed.

Posted on Nov 22, 2008

davespcr
  • 115 Answers

SOURCE: location of the oil dipstick on 2002 chevy s-10

My manual shows the location as being toward the back on the left side of the engine (as you're sitting in the driver's seat), but my 2001 Blazer's is on the opposite side in the same place.
You should be able to get a free copy of your owner's manual here.

Posted on Dec 13, 2008

  • 105 Answers

SOURCE: What is the length of 2005 Chevy Colorado Z71 oil dipstick

If the manuel says 6 qt thats what it takes. Sometimes 5 min is not enough time for all the oil to run down from the top of the engine check the oil after 1 hour if you removed the same amount that you put in I think you are safe

Posted on Mar 18, 2009

Mustgo
  • 2359 Answers

SOURCE: Blowing oil out the dipstick

Check the oil when the engine is cold. Make sure it's at the correct level.

========================

The Positive Crack Valve (PCV) is partial blocked.

This is under $10 item. You should change it.

The location of the PCV is on the top (or near top) of the valve cover.

Replace it and the oil/smoke will reciculate back to the correct path (back to the valve cover).

Posted on Nov 02, 2009

peterrance19
  • 399 Answers

SOURCE: I have a 2004 chevy colorado. I was going to

hi its situsted next to front passanger wheel in line with the transaxle you will see the oil pan the drain plug is on the back please rate this answer

Posted on Nov 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have oil blowing out of the filler tube when I remove the cap on my 2008 Chevy Colorado what could be the problem


It's most likely due to a clogged PCV valve or clogged/kinked PCV hose. I'll include a video showing PCV system operation.
I've seen this symptom many times on various engines, and the PCV valve was usually clogged/defective. A clogged PCV valve results in crankcase pressure build-up and fumes/oil exiting places on the engine that it shouldn't. A severely clogged PCV often makes oil leak/exit out of the dipstick, even with dipstick in place.
The good news is... if the PCV valve is clogged/defective, the "cure" is a very cheap fix. Usually less than $5.
PCV stands for Positive Crankcase Ventilation, btw.

But note that on some engines (those where the oil filler opening is directly above the rocker arms/valvetrain) it is normal to have a small amount of oil "spray" come out, as the rocker arms are dispersing oil thru their oil passage hole on top.

(Whenever posting vehicle questions, always please add the engine size/type. It helps in more accurate diagnosis.)
Also, please rate via the helpful button if you feel my answer helped you out. Also post back and let me know if this cured it.

Nov 04, 2014 | 2008 Chevrolet Colorado

1 Answer

Where is the transmission dip stick on a 2005 cherolet colorado


The transmission dipstick has a yellow top and is located on the right side behind your oil dipstick. Hope this helps

Aug 29, 2014 | 2005 Chevrolet Colorado

1 Answer

Why would a 2004 Chevy Colorado use oil?


Can't use it like that
Have to check Manufacture Bulletins
You got cylinder ring or valve issues
Those inline 5 cylinder motors has head problems
Google that & see what you can find
You could try a dealer just for the info,but I doubt
they would be honest with you

Jul 26, 2013 | Cars & Trucks

1 Answer

Water in oil, 2.8 liter colorado - changed head gasket last winter, same problem this winter?


just in dip stick? or in oil if in oil then nedd to change both head gaskets but if not on oil its condensation that builds up nacause of moisture

Jan 05, 2012 | 2004 Chevrolet Colorado

1 Answer

Where is the oil drain plug on my 2006 two wheel drive ex cab chevy colorado. I can not find it anywhere please help me!!


The drain plug is on the drivers side of the oil pan. About 1/2 way back from the front of the engine

Jan 25, 2011 | 2006 Chevrolet Colorado

1 Answer

After a long trip my chevy colorado will have white smoke come from the tail pipe after restarting and then stops after a few minutes ??? I need to use it on trips. What is happening?


White smoke is from water in the exhaust.
A failing head gasket can cause this.
Is your coolant level droping
Goes the oil on your dipstick look milky
Both of these are symptoms of a blown head gasket.

the problem can also be a cracked head or cylinder wall

Have a leak down test done to confirm if its a head gasket leak.

Oct 12, 2010 | 2005 Chevrolet Colorado

1 Answer

What is the torque for oil pan bolts on 2004 chevy colorado


For re-install Oil Pan, checj this procedure...


10c561d.jpg

Fig. Oil pan sealant application areas-Canyon & Colorado

  1. Apply a bead of sealant around the oil pan as shown.
    NOTE Install the oil pan within 10 minutes of applying the sealant.

  2. Install the oil pan, making sure that the pan if positioned fully rearward against the transmission mounting surface.
  3. Install the oil pan bolts and tighten the side bolts to 18 ft. lbs. (25 Nm). Tighten the end bolts to 89 inch lbs. (10 Nm).
  4. Connect the engine wiring harness retainers to oil pan.
  5. If equipped with 4WD, position the steering gear upward to the frame assembly and install the steering gear mounting bolts.
  6. Install the four lower transmission mounting bolts and tighten to 37 ft. lbs. (50 Nm).
  7. Install the nuts securing the fuel pipe bracket at transmission and tighten to 15 ft. lbs. (20 Nm).
  8. Install the service slot plug.
  9. Right front halfshaft, if equipped with 3.5L Engine
  10. If equipped with RWD, install the power steering gear.
  11. If equipped with 4WD:
    1. Position the differential carrier assembly to the frame.
    2. Install the differential carrier assembly bushing to frame bolts. Tighten to 112 ft. lbs. (152 Nm).
    3. Install the front driveshaft.

  12. Install the engine splash shield.
  13. Install the oil dipstick tube. Tighten the bolt to 89 inch lbs. (10 Nm).
  14. Fill the engine with oil to the correct level.
  15. Start the engine and check for leaks.
Hope help with this (remember rated this help).

Mar 12, 2010 | 2004 Chevrolet Colorado

1 Answer

What is the length of 2005 Chevy Colorado Z71 oil dipstick


If the manuel says 6 qt thats what it takes. Sometimes 5 min is not enough time for all the oil to run down from the top of the engine check the oil after 1 hour if you removed the same amount that you put in I think you are safe

Mar 18, 2009 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2007 Chevrolet Colorado (Extended Cab) New Cars Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...