Question about 1993 Ford Ranger SuperCab

Open Question

1993 ford ranger 2.3 have replaced thermostat and still blows cold no heat

Heater blows cold

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: not blowing any heat

took it to the ford garage ...

Posted on Dec 28, 2008

motor1258
  • 6674 Answers

SOURCE: Heater is blowing luke warm heat

Double checking, does fun shut off when switched to heat instead of defrost?

Posted on Jan 24, 2009

  • 104 Answers

SOURCE: heater blows cold air have replaced the thermostat

sounds like the controller went bad use temp checker see what your temp is at inlet of heater core from hose

Posted on Sep 08, 2009

  • 518 Answers

SOURCE: 1999 Ford Taurus, no heat.

Try checking the two pipes that go into and come out of the heater matrix, is one of them hot? if it is there is an air lock within the matrix, Also is the thermostat opening fully? Sorry i know you said you have changed it twice already but take it out check settings when it should open and close, then boil some water and test the thermostat

Posted on Dec 30, 2009

  • 2 Answers

SOURCE: heater blows cold air. I have replaced thermostat,

Not an expert by any means, but i know my ranger.. I had a small leak at the top of my radiator that still cooled the engine but didnt have enough pressure to get to the heater. The heater hoses travel up over the engine and just were not gettin anything to my heater core. That or make sure the heater control valve is operating.

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1993 ford ranger


Any chance you got an air bubble in the system? Try loosing the return hose from the heater and make sure your getting fluid through the heater core.

Feb 24, 2014 | Cars & Trucks

1 Answer

2008 Ford Ranger heater blows cold air regardless of thermostat position.


Several things can cause a no heat condition. Try this - After the engine is warmed up turn on the heater and place you hand on the two heater hoses (CAUTION THEY WILL BE HOT)- if one is hotter than the other you may have a clogged heater core. The problem could also be as simple as the heat door not opening under the dash.

Oct 02, 2012 | 2008 Ford Ranger

1 Answer

Heaters blow cold


could be heater core failure.

If the temp guage remains cold....the thermostat is stuck open, therefore coolant is running thru the motor always. Therefore, no heat anywhere, and poor gas mileage.

Apr 01, 2010 | 1993 Ford Festiva

1 Answer

I have a 1993 Acura Ledgend. For some reason my heater does not continue to blow hot air, it does for a few minutes and then begain to blow cold air. It does this often now. It works and then it blows cold...


first check to see that you coolant level is full, check it after the engine has cooled down,so there is no pressure in the system. otherwise you possibly have a head gasket in the early stage of failure

Nov 30, 2009 | 1993 Acura Legend

1 Answer

Heater blows cold


If no coolant flowing through the heater core then ther is no heat. There are 2 possible root causes needed to check out: 1- THE VALVE TO CONTROL THE COOLANT FLOWING TO THE HEATER CORE IS NOT OPENING AS DESIRED. 2- THE HEATER CORE GOT CLOGGED UP AND NEED TO BE FLUSHED.

Nov 15, 2009 | 1993 Ford Taurus

2 Answers

Heater blows cold air. I have replaced thermostat,


Not an expert by any means, but i know my ranger.. I had a small leak at the top of my radiator that still cooled the engine but didnt have enough pressure to get to the heater. The heater hoses travel up over the engine and just were not gettin anything to my heater core. That or make sure the heater control valve is operating.

Oct 26, 2009 | 1997 Ford Ranger SuperCab

2 Answers

2003 Ford Ranger 4 Cyl 2.3 litre engine


Is the blower blowing? if not could be a blown fuse or bad blower. If the blower is working make sure your coolant level is full, If both of theese things check out , you may have a vacume line loose somewhere that controls the duct witch controls it to change to defrost ,vent or hot to cold.

Oct 07, 2009 | 2003 Ford Ranger Regular Cab

1 Answer

Heater in truck blows either cold air or no air.


It sounds like you have air trapped in the cooling system. Try filling the radiator and coolant reservoir cold. Then leave the radiator cap loose and run engine at 1500 rpm until it warms up and the thermostat opens. Make sure heater is on full warm setting.

Oct 02, 2009 | 1991 Ford Ranger Supercab

1 Answer

Heater is blowing luke warm heat


Double checking, does fun shut off when switched to heat instead of defrost?

Jan 24, 2009 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...