- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is the check engine light on? Check for fault codes first. Sometimes these engines had issues with carbon build up and poor starting cold. Run a bottle of Techron thru the tank and see if it gets better.
There is no valve cover gasket for that engine. The cover for the cams is sealed by a special sealant that is applied to the cover and then it is torqued on. You could get into a world of trouble if you try this with out the special tools. Also, it is necessary to remove the timing belt to do this properly.
you only need it to reset service light just change oil and filter as normal then refer to manuel on seqence to set light or take car to dealer who will do it for you will not effect running of car if light is on it is just to tell you service is due
Clear your engine and transmission codes, its a small box in the pass side engine compartment right behind the headlight. Search "Bay 13 Volvo" and that has all the information to check and clear the codes. It also has a list of what the codes mean to help you.