Question about 2007 Lexus LS 460 L Sedan
Away a month, battery seemed dead. Put it on a trickle charger and all is good, except every bleeping light on the dash is in warning mode with the message "check abs" and "check vdc" but my brakes are perfect.
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: all dash warning lights came
You're alternator has gone bad and the vehicle was running on battery power. The "clicking" sound is your now dead battery that does not have enough power to turn over the starter. You might also want to check your power steering pump for leak. This is a know problem with early LS400s and will most likey be the cause of the alternator failure. I just dropped $1050.00 to fix the very same promblems you have.
Posted on Jul 21, 2008
I brought my RX350 to the dealer for this problem before. They told me to inflate my tires to 36psi for winter time although the recommended pressure is 30 psi
Posted on Jan 18, 2009
ur vsc light will come on whenever you have a check eng light on. best thing to do is bring ur car to a local and have them scan ur car. your car should still be under factory warranty any repairs wont cost u anything.
just from my experience a 2007 ES with a check eng light is most likely a faulty a/f sensor or a loose gas cap
Posted on May 07, 2009
SOURCE: tire warning light won't go off
make sure all tires including your spare have tire pressure between 34 and 38 lbs if the tire pressure is not between 34 and 38 the tire light will not go off
Posted on Nov 04, 2009
SOURCE: 2001 lexus ls430: warning
yaw sensor is out of calibration, most likely from hoisting vehicle in air. sensor needs to be calibrated before light will go out. jump pin 3 and 5 of dlc under driver side dash. connect jumper wire with ignition off, turn ignition on, vsc light should flash, let it flash for awhile (10 sec). turn ignition off and disconnect jumper wire.(do this with vehicle station on ground).
Posted on Sep 21, 2010
Tips for a great answer:
Apr 18, 2017 | Lexus Cars & Trucks
Feb 19, 2017 | Lexus Cars & Trucks
Dec 01, 2016 | Lexus LS 460 Cars & Trucks
Dec 01, 2014 | 2000 Lexus ES 300
Feb 24, 2013 | 2000 Toyota Celica
Dec 28, 2012 | 2002 Porsche Boxster
Jul 16, 2012 | 2007 Lexus RX 350 FWD
Apr 16, 2014 | 2007 Lexus LS 460 L Sedan
147 people viewed this question
Usually answered in minutes!