Question about 1998 Honda Passport

1 Answer

I need a diagram of how to put transmission in 98 honda passport

I have a 98 honda passport an i have tried putting transmission fluid in it but it's not working i need to see a diagram so i will no if i'm putting it in the rite hole.

Posted by on

  • Rick Byrd
    Rick Byrd May 11, 2010

    are you putting it in a dipstick hole that the transmission stick came out of ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If you have an automatic transmission, you should take it to a mechanic or at least purchase the special fluid temperature gauge needed to do it right. You add fluid through the overfill screw opening found on the transmission fluid pan (there is no dipstick or underhood component on the 96' and later models). It should be located in one corner of the pan; there's also a drain plug is more toward the middle. Never open the overfill screw with the engine stopped - it should always be running and warm.

For a manual transmission, the fill plug is also on the pan, but it is located on the side.

Posted on Jan 19, 2009

  • Eponymous
    Eponymous Jan 19, 2009

    Again I say: beg, borrow, buy, or steal a temperature gauge if you have an automatic. Add the new fluid with a small pump or syringe only when the gauge reads between 90 and 135 degrees F.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Eponymous
  • 7 Answers

SOURCE: i have a 98 honda

(Duplicate Question = Duplicate Answer)

If you have an automatic transmission, you should take it to a mechanic or at least purchase the special fluid temperature gauge needed to do it right. You add fluid through the overfill screw opening found on the transmission fluid pan (there is no dipstick or underhood component on the 96' and later models). It should be located in one corner of the pan; there's also a drain plug is more toward the middle. Never open the overfill screw with the engine stopped - it should always be running and warm.

Again I say: beg, borrow, buy, or steal a temperature gauge if you have an automatic. Add the new fluid with a small pump or syringe only when the gauge reads between 90 and 135 degrees F.

For a manual transmission, the fill plug is also on the pan, but it is located on the side.


Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What type of transmission fluid do I put in a 1998 Honda Passport


If it is an automatic Honda recommends you only use their own brand fluid, the same may apply for a standard transmission. You can't go wrong if you buy the fluid from a Honda dealer.

Jan 22, 2017 | 1998 Honda Passport

1 Answer

1998 Honda Passport transmission fluid capacity,how much do I put in transmission


Drain and fill is about 5 and 1/2 quarts. Start with 4 and 1/2. Start it and get to operate temperature. Shut it off and check the fluid. Add till between the v marks.

Oct 30, 2016 | 1998 Honda Passport

1 Answer

How do i find the transmission fluid dip stick on a 2001 honda passport?


There is no dipstick. The engine and transmission was designed by Isuzu up till 2002, and the automatic transmission was a sealed, no-maint. transmission. You will either need to purchase the special tools needed, or...........that's right, go to a transmission shop!!!

Aug 06, 2014 | 2001 Honda Passport

1 Answer

I need to know how to put transmission fluid in my nissan


You can put transmission fluid in the same place you check it, just use a narrow funnel.

Jun 11, 2011 | 1996 Honda Passport

1 Answer

Where to check transmission fluid on honda passport? On an 01 Passport the Automatic Transmission?


checking the transmission fluid of the honda passport is not an easy job. the cap is located at top of the transmission, determining the fluid level is by feel.

Feb 28, 2011 | 1996 Honda Passport

1 Answer

I have a 1996 Honda Passport with an automatic transmission I now know how to check the transmission fluid but I don't know how to put fluid in please advise me how to put in the transmission fluid.


  1. check fluid while running in park or neutral
  2. wipe stick off put back in check again look at both sides of stick
  3. if need to add put fluid in tube where the stick goes
  4. only add what you need check again

Nov 12, 2010 | 1996 Honda Passport

1 Answer

My transmission light has been coming on just 2 weeks ago i put some transmission fluid in it because the light came on and it act like it waanted to slow down


Either the fluid is low, or filter needs to be changed. You may need to reset computer to shut light off.
If you would like to view a full free online repair manual for your passport, go to autozone.com and register for free.

Sep 05, 2009 | 1997 Honda Passport

2 Answers

Locating transmission fluid


I believe those transmissions are computer controlled. There should be a light that comes on when you need to put more fluid in. Only way to actually KNOW how much is in there is to change the tranny filter/pan gasket and see how much drains out

Jun 02, 2009 | 1999 Honda Passport

1 Answer

I have a 98 honda passport that i need to put transmission fluid in but i need a diagram to make sure i'm putting it in the rite whole


(Duplicate Question = Duplicate Answer)

If you have an automatic transmission, you should take it to a mechanic or at least purchase the special fluid temperature gauge needed to do it right. You add fluid through the overfill screw opening found on the transmission fluid pan (there is no dipstick or underhood component on the 96' and later models). It should be located in one corner of the pan; there's also a drain plug is more toward the middle. Never open the overfill screw with the engine stopped - it should always be running and warm.

Again I say: beg, borrow, buy, or steal a temperature gauge if you have an automatic. Add the new fluid with a small pump or syringe only when the gauge reads between 90 and 135 degrees F.

For a manual transmission, the fill plug is also on the pan, but it is located on the side.


Jan 18, 2009 | 1998 Honda Passport

4 Answers

How do you put in transmission fluid?


Unfortunately, you have a closed system transmission, there is no dipstick or filler tube. I have a 96 passport and to have fluid replaced in the transmission you need to take it to a garage that is equipped to fill closed transmissions. This generally runs about $100.00 at the dealership. I was on my way to get my transmission serviced when the trans broke. Don't wait long if you're having issues.

Jun 30, 2008 | 1996 Honda Passport

Not finding what you are looking for?
1998 Honda Passport Logo

825 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74269 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7234 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...