Question about 1993 GMC Sierra C2500

Open Question

Door handle broke on my 1993 gmc sierra pick-up

How do you get the door panel off to access handle

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 328 Answers

SOURCE: How do you remove the door panel on a 1997 GMC 1/2 ton trucks?

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008f768
Hope this helps!

Posted on Feb 16, 2009

Ad
honeymokey
  • 3113 Answers

SOURCE: Removing passenger door panel

There is a screw behind the lock rod. Lift door panel straight up to remove

Posted on Jun 13, 2009

  • 1986 Answers

SOURCE: door panel removal

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 17 Answers

SOURCE: how do you repair a

You have to remove the door panel, if you have roll down windows the handle will have to be removed. After panel is removed you have to drill the one rivet that hols the interior handle. slide the handle down and unfasten the rod retaining clip. Please make sure you do not break the clip. Install the new interior door handle, clip and provided fasteners. Try the door before you install the interior door panel, Note the is a good time to lube the window roller and the door mechanism. Make sure to install the water shield to provide the protecting from the elements. Line all the plastic retaining clips and or replace if they are broken. Good Luck.

Posted on Aug 24, 2009

  • 1986 Answers

SOURCE: How do you install an inside door handle on a 1997

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can put the new handle in and reconnect everything

Posted on Sep 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i take off my door panel to get to my window motor in my 1993 GMC sierra


the door panel is just pushed on the inner door with pop studs just hook them off

Aug 21, 2010 | 1993 GMC Sierra

1 Answer

How do i replace the door handle on a 1998 gmc suburban


remove the inside door trim to gain access to the inside of the door, there may be plastic covering the large openings in the back of the door panel, you have to remove that as well to gain access to the rear of the door handle.
there will be a couple of nuts or bolts that you have to remove and also a metal rod which connects to the handle, once these are removed you should be able to remove the handle from the door

Jun 13, 2010 | 1998 GMC Sierra

1 Answer

I have a 2000 GMC Sierra. The Driver side interior door handle no longer opens the door. I know this is a problem with all vehicles of this model. What is most likely wrong and how do I fix it?


have to remove panel to access back of handle if plastic retainer to rod broke off than easy fix just reclip if the handle broke in two which is the more lkely than need to replace salvage yards cheaper and quicker for part -online about 18 to 25 for replacement -or dealer to replace it the handle surround is pop riveted in place drill out replace with a screw and exchange the rods from old to new

Jun 10, 2010 | 2000 GMC Sierra 3500

1 Answer

How do you remove the door panels from a 2001 GMC Sierra pick up


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect any other wiring that may be attached to the door.

Nov 02, 2009 | 2001 GMC Sierra 1500HD

1 Answer

I have taken the door panel off of my '98 GMC Sierra to fix my door handle, which does not work anymore. It has no resistance against it, and moves side to side without even trying to open the door. When i...


Broken inside door handles are a common problem and there is not an easier way of fixing problem.drill out head of rivet with a 3/16 drill bit.Then slide handle assy. from panel.To install new handle attach the two rods you removed .Then slide new handle back into the slots and replace the rivet.

Aug 06, 2009 | 1998 GMC Sierra

2 Answers

Door Stuck Shut


not good,try to pull off the door panel a little enough to get your hand in there to reach the latch itself ,and is the lock hooked up?maybe its not unlocking first

Apr 21, 2009 | 2000 GMC Sierra

1 Answer

Door panel removal


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 22, 2009 | 1998 GMC Sierra

1 Answer

Replacing door handle driver side, exterior. How to release the lock set and put it on the new one?


u r asking 2 different things if u are working on a gm pick up as they r seperate items... door handle is bolted in, lock uses a clip... remove door panel!

Jan 11, 2009 | 1989 GMC Sierra

Not finding what you are looking for?
1993 GMC Sierra C2500 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...