Question about 1999 Dodge Caravan

1 Answer

NO heat or air conditioning 1999 grand caravan

I have no heat and no air conditioning on my 1999 grand caravan already recalibrated several times could it be the recirculating door or something else?

Posted by on

  • Birnel A Dec 30, 2012

    I have already filled the coolant long ago that wasnt the problem and have replaced the thermastat twice

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Today i noticed that there is someting on engin is missing because when i put the coolant it comes right out when i look at where is licking i notice frome engine there is big whole which supoose to be close is open i think the mechanic which i took my car to for oil chang did it
could you tell me what dose that part is called so i can go and buy it and replace it thank you

Posted on Dec 31, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: air conditioning only works on high - 2002 Grand Caravan

If you are looking for the fan blower resistor, it is located behind the glove box. No tools need to get to it and a nut driver to remove the 2 screws to replace it. A 20$ part. It has 2 sets of wires coming off of it. A do it yourself fix.

Posted on Feb 05, 2009

  • 1 Answer

SOURCE: 1999 Dodge Grand Caravan horn and Cruise control

I recently had the same issue, but my airbag warning lights also turned on. If this is the case, it might be the clockspring. There is a recall on clocksprings for Caravans 1998 - 2000 I believe. I got it replaced for free in the dealership. Enter your VIN in this site and it will tell you if you are covered in the free replacement warranty.
http://www.chrysler.com/webselfservice/chrysler/index.jsp?screenName=recall&country=us&emailUrl=goToEmailForm%28%27R%27%29

Hope this helps.
Sonny

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

08 dodge nitro blows hot air on passenger side but cold air out the drivers side!! Any answers




NOTE: LHD model shown. RHD model similar. All vehicles are equipped with a common heater, ventilation and air conditioning (HVAC) housing assembly (1). The heating-A/C system combines A/C, heating, and ventilating capabilities in a single HVAC housing mounted within the passenger compartment behind the instrument panel. The HVAC housing assembly includes:
  1. Mode-air doors (2)
  2. A/C evaporator (3)
  3. Recirculation door actuator (4)
  4. Air inlet housing (5)
  5. Recirculation-air door (6)
  6. Blower motor (7)
  7. Blower motor resistor (8)
  8. Heater core (9)
  9. Air distribution housing (10)
  10. Blend-air door (11)
  11. Blend door actuator (12
  12. Floor distribution ducts (13)
  13. Mode door actuator (14)

Jan 28, 2015 | 2008 Dodge Nitro

1 Answer

Ac light and air recirculate light flash constantly. what would cause this


Check to see that air conditioning compressor is actually cycling while a/c is "turned on". If it is not then most likely the system is low on refrigerant and there is a low pressure sensor that keeps the system from running while low on refrigerant.

Apr 21, 2014 | 1998 Dodge Grand Caravan

1 Answer

Temp light flashes when car start up. turn on heater and blows cold air on passenger side, and barely warm on driver side. No blowing air from defroster. Will work occasionally but usually it is this...


Air Door Actuators/Motors Removal & Installation Recirculation Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the left sound insulator panel.
  2. Disconnect the vacuum hose from the recirculation actuator.
  3. Remove the recirculation actuator from the valve.
To Install:
  1. Connect the recirculation actuator to the valve.
  2. Clip the recirculation actuator to the air inlet.
  3. Connect the vacuum hose to the recirculation actuator.
  4. Install the left sound insulator panel.
2000 - 2005 2000 - 2005 Recirculation Actuator gm-10-00-1559.gif

To Remove:
  1. Remove the instrument panel compartment.
  2. Remove the right sound insulator.
  3. Remove the dash integration module from the bracket.
  4. Remove the 2 dash integration module bracket fasteners and position the bracket to gain access to the recirculation actuator.
  5. Disconnect the electrical connector from the recirculation actuator.
  6. Remove the recirculation actuator.
To Install:
  1. Install the recirculation actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the recirculation actuator.
  3. Install the dash integration module bracket and torque the fasteners to 12 in-lbs (1.4 Nm).
  4. Install the dash integration module into the bracket.
  5. Install the right sound insulator.
  6. Install the instrument panel compartment.
  7. Recalibrate the actuator.
Defroster Valve Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Unclip the defroster valve actuator from the air inlet.
  3. Disconnect the defroster valve actuator from the valve.
To Install:
  1. Disconnect the defroster valve actuator from the valve.
  2. Clip the defroster valve actuator from the air inlet.
  3. Install the air distributor assembly.
Heater/Bi-Level Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Remove the clip and the screws that fasten the 2 halves of the air distributor assembly and separate the air distributor assembly.
  3. Unclip and disconnect the heater/bi-level actuator from the valve.
To Install:
  1. Connect and clip the heater/bi-level actuator to the valve.
  2. Fasten the 2 halves of the air distributor assembly together and torque the fasteners to 13 in-lbs (1.5 Nm).
  3. Install the air distributor assembly.
Temperature Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the instrument panel assembly.
  2. By snapping the rod out of the valve, remove the temperature valve link rod from the temperature valve.
  3. Disconnect the electrical connector from the temperature actuator.
  4. Remove the temperature actuator.
To Install:
  1. Install the temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the temperature actuator.
  3. Start the vehicle.
  4. Set the fan to position to high.
  5. Set the temperature to full hot.
  6. Allow a minimum of 45 seconds for the temperature valve actuator to move to the full hot position.
  7. Move the temperature valve to the full hot position.
  8. Snap the temperature valve link rod into the temperature valve.
  9. Install the instrument panel assembly.
Mode Actuator 2000 - 2005 Mode and Left Air Temperature Actuator gm-10-00-1560.gif

To Remove:
  1. Remove the left side sound insulator panel.
  2. Remove the knee bolster.
  3. Remove the instrument panel cluster. (Automatic HVAC)
  4. Disconnect the electrical connector from the left air temperature actuator. (Automatic HVAC)
  5. Remove the left air temperature actuator. (Automatic HVAC)
  6. Disconnect the electrical connector from the mode actuator.
  7. Remove the mode actuator.
To Install:
  1. Align the mode door levers with the cam slots.
  2. Install the mode actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  3. Connect the electrical connector to the mode actuator.
  4. Install the left air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm). (Automatic HVAC)
  5. Connect the electrical connector to the left air temperature actuator. (Automatic HVAC)
  6. Install the instrument panel cluster. (Automatic HVAC)
  7. Install the knee bolster.
  8. Install the left side sound insulator panel.
  9. Recalibrate the actuators.
Left Air Temperature Actuator 2000 - 2005 Mode and Left Air Temperature Actuator gm-10-00-1560.gif

To Remove:
  1. Remove the left side sound insulator panel.
  2. Remove the knee bolster.
  3. Remove the instrument panel cluster.
  4. Disconnect the electrical connector from the left air temperature actuator.
  5. Remove the left air temperature actuator retaining screws.
  6. Remove the left air temperature actuator.
To Install:
  1. Install the left air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the left air temperature actuator.
  3. Install the instrument panel cluster.
  4. Install the knee bolster.
  5. Install the left side sound insulator panel.
  6. Recalibrate the actuators.
Air temperature Actuator (Manual), Right Air temperature Actuator (Automatic) 2000 - 2005 Right Air Temperature Actuator gm-10-00-1561.gif

To Remove:
  1. Remove the instrument panel compartment.
  2. Disconnect the electrical connector from the air temperature actuator.
  3. Remove the right air temperature actuator.
To Install:
  1. Install the air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the air temperature actuator.
  3. Install the instrument panel compartment.
  4. Recalibrate the actuators.
prev.gif next.gif

Nov 03, 2010 | 1998 Buick LeSabre

1 Answer

Where is the cabin filter on grand caravan sxt with dual air conditioner controls


It is on the passenger side, behind the lower glove box door. Empty your lower glovebox contents, and press in on the tabs to allow the glovebox door come completely open and hang down. There is a place where the filter cartridge slides in behind this glovebox area.

Be sure that you key is off and out of the ignition to ensure that the fan is off. This filter sits on top of the air recirculating fan.

Hope this helps.

May 28, 2010 | 2008 Dodge Grand Caravan

1 Answer

WHERE IS LOCATED BLOWER MOTOR IN DODGE GRAND


the blower motor is located in behind the glove box. lower the glove box door and look inside. to remove the blower motor you will have to remove the glove box door and the lower half or the instrument panel to gain access to the heating/air conditioning unit.

Apr 27, 2010 | 2005 Dodge Caravan

2 Answers

1999 Dodge Grand Caravan - dome light intermittent


Could be a worn or defective door switch. That is the first thing I would check.

Oct 20, 2009 | Dodge Grand Caravan Cars & Trucks

1 Answer

Heater problems


Your heater issue could be several thing, if there is absolutly no het then it could be a thermostat. It may also be a fresh air mode door. there are no linkages to check, it's all electrically controled.Recalibration of the control head has to be done by the dealer with their scan tool.If that's what the problem is. Give a little more info and I'll point you in the right direction.

Jan 30, 2009 | 2000 Dodge Caravan

1 Answer

1999 Ltd. The right vents blow hot air but left vents blow cold


Yes go to you have to get the codes from your ATC controls first...Hold down the A/C button and the Recirculating button at the same time and while holding the two buttons turn you left temp. control up. It should give you codes if not then it will just read 00. Once you get those find out what they mean...20, 46,52,or 54 means you blend door(s) are stuck down and have to come up to allow heat to flow. Go to www.heatertreater.net and it will tell you how to replace it or in my case I just fixed it by putting a screw in it to hold the doors up....But hey i'm cheap so i like quick fixer uppers!!! Try that and lemme know if it works...

Dec 05, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Dodge Caravan Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...