Question about 2008 Ford Escape

Open Question

2008 FORD ESCAPE HEATER BLOWING COLD AIR

HEATER WORKS WHEN IT WANTS TO. SOMETIMES HEAT WORKS BUT WHEN I TURN IT DOWN AIR BECOMES COLD AND STAYS COLD. I TURN OFF THE ENGINE A FEW MINUTES AND WHEN I RESTART THE ENGINE I SOMETIMES GET HEAT BUT MOST OF THE TIME I GET COLD AIR BLOWING.

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Ford windstar 2001

Replace the heater actuator switch it is not allowing the door to open, Ours did the same thing so I relaced it . it cost 90.00 from ford

Posted on Nov 02, 2008

jamaicanmech
  • 17 Answers

SOURCE: My 1999 Ford F150 Heater only blows out cold air

guys have you checked for a vaccum leak????? there is a little plastic ball with a vaccum line going to it that controls the outside air coming in. check for a leak in this line

Posted on Jan 08, 2009

  • 11 Answers

SOURCE: 1998 for taurus heater wont blow hot air only cold

you need to check the blend door in the heater box it maybe broken or stuck.the blend door switches between the heater core and ac evaporator to provide a mix of temperature

Posted on Oct 18, 2009

  • 4088 Answers

SOURCE: 2008 ford f250 6.4l diesel, heater works one time

Feel the heater hoses when it blows cold air--they should be quite hot when the engine is up to temperature. If ok, then either the control center in the dash has a problem or an air-duct vacuum-controlled-valve has a problem with sticking in one position. The truck is too new to have bad vacuum lines, but one may have a kink that is causing a problem. Check around the engine and the dash control panel for a loose or split vacuum line.

Posted on Dec 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blows cold air turn heat on


Search Results

    07 Tucson heater blowing cold air - Hyundai Forum - Hyundai ...

    www.hyundaiforum.com > ... > Vehicle Line Up > Hyundai Tucson
    Dec 16, 2009 - I have a 2007 Tucson, when you turn on the heater it only blows hot air... Join Date: May 2005 ... a low coolant level will exhibit the first stated symptoms of no heat/low heat at idle and increased heat at cruise due to an air ...

    Denlors Auto Blog » Blog Archive » Car Heater Blows Cold ...

    www.denlorstools.com/autoblog/.../car-heater-blows-cold-auto-service-ti...
    Oct 10, 2009 - When a car heater blows cold air, there are several possibilities that should ...... On my Dodge Neon when I turn on the heat it blows out cold air.

    Heater blows only cool air...even w/ defroster on : Buick ...

    repairpal.com > Problems > Buick > LeSabre
    ... Cadillac, Chevrolet, Chrysler, Dodge, FIAT, Ford, Geo, GMC, Honda, Hummer,Hyundai, Infiniti, Isuzu, Jaguar ... I'll turn up the temp on the dual control to get heat,

Jan 28, 2016 | 2005 Hyundai Tucson

1 Answer

Problem answers for no heat, 08 Escape


are the heater hoses connected ?? does it have a electric motorised solonoid to open the hearter hose feed ,Sorry never seen one of these vehicles so i do not know the build/layout of components on this vehicle ,with my head in the engine bay i soon see the problem but just never seen on to know .

Jan 03, 2016 | 2008 Ford Escape

1 Answer

Ford Escape Heater Vent Control


suspect a control panel issue as this HVAC (heater, ventilation, Air conditioning ) system should be all electric... If you can pull the control panel out looking at the back of it will answer your question... are the cables or just wires..

Dec 28, 2013 | 2008 Ford Escape

1 Answer

2008 Ford Escape Limited- Air/Heat stopped working in all 4 speeds- Dad replaced resistor and it still does not work. Help!


replace the heater fuse/breaker and, the whole resistor set (each resistor controls a different speed on the heater fan: low,medium, high speed

Dec 03, 2013 | 2008 Ford Escape

1 Answer

Front heater not blowing any heat


You will need to be more specific ... front heater wont turn on after using the on switch? Heater blows but only warm air ... heater blows cold air .... see what I mean.

Nov 26, 2013 | 2008 Hyundai Veracruz

1 Answer

04 ford escape new thermostate still no hot air blows cool hold it about 2500 rpm it get warm let off gas goes back cool


Check the heater core, if it's OK, check the thermostat again, but it could be the heat switch too.

Mar 23, 2013 | Cars & Trucks

1 Answer

2008 Ford Ranger heater blows cold air regardless of thermostat position.


Several things can cause a no heat condition. Try this - After the engine is warmed up turn on the heater and place you hand on the two heater hoses (CAUTION THEY WILL BE HOT)- if one is hotter than the other you may have a clogged heater core. The problem could also be as simple as the heat door not opening under the dash.

Oct 02, 2012 | 2008 Ford Ranger

2 Answers

I have a 2010 ford escape..prob started as a coolant leak..took it to ford dealer, they repl water pump..a week later we noticed when u stop a red lite heater starts blowing cold air..took back to...


The performance of the heater indicates low coolant level. Pretty strange about the multiple water pumps, but if is is under warranty, you need to keep going back to the dealer. They must be missing something...

Dec 16, 2010 | 2008 Ford Escape

1 Answer

'02 Escape, heater cold when outside air below freezing


This could be a few different problems. I would recommend taking it in and having the antifreeze checked to see if it is of a sufficient mix to keep it from freezing. Sometimes the antifreeze will be to thin to keep it from freezing and it will start to freeze in the heater core. If this is the case, the vehicle may not run long enough to thaw out the antifreeze in the heater core to generate heat. Another possibility is that the thermostat is stuck in an open or partially open position not allowing the engine to reach a high enough temperature to generate heat through the heater core. The last possibility is that there is a blockage in the heater core not allowing the hot antifreeze to pass through the heater core thereby reducing the amount of heat drawn off of the heater core. These are but a few of the more simple problems but any of them should be treated by a licensed mechanic.

Dec 26, 2009 | 2006 Ford Escape

2 Answers

Heater is blowing but its cold air not hot air 2000 expedition


Make sure the heater core is in the open position by using the shut off valve and turning it to open. next, you may have a malfunction in the direction door the directs the air flow in the dash. a lever may have become lose or separated. may be a bad servo motor not directing the door to move to the heater position. i would start by checking that shut off valve first on the heater core.

Mar 13, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2008 Ford Escape Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...