Question about 1997 Mercedes-Benz Mercedes Benz Sl Class

Open Question

How to lower the top in the manual for benz r129

I wanna fold the soft top manually

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
jasperoni
  • 203 Answers

SOURCE: How to lower soft top manually on 1995 SL500?

It depends how much hydraulic pressure you have in the system. Take your softop tool and unlock the rear locks via trunk. see if you can raise the rear of the top (do not force because you will damage a ram). Next unlock your compartment lid and then the front of the top. You may be able to then retract it into it's storage compartment. The manual should also tell you how to release the hydraulic pressure via your pump in the trunk by your spare. hopefully I have been helpful

Posted on Jul 15, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 corvette top will retract but deck lid makes no effort to close, then top will not go back up. Need to release pressure in block lift top up about 1/4 of way then top will go back up


Manually Moving the Folding Top from the Down Position
Important: Allow the system a minimum of four minutes to bleed down pressure after the last cycle.
Manually release the folding top cover latch using the emergency release cable.
Raise the folding top stowage cover.
Manually raise the folding top, holding the 5 bow up.
Manually lower and latch the folding top stowage cover.
Manually unfold the top and latch per normal procedure.

Manually Moving the Folding Top from the Up Position
Important: Allow the system a minimum of four minutes to bleed down pressure after the last cycle.
Manually release header latch per normal operation.
Manually lift front of roof off of the header and raise the #5 bow at the same time.
Manually release the Folding Top Cover latch using the emergency release cable.
Fold the roof down into the well.
Manually close and latch the folding top stowage cover.

Power Folding Top System Components
The power folding top system consists of the following components:
• Folding top control (FTC) module
• Body control module (BCM)
• Folding top control switch
• Serial data communication
• Folding top cover latch actuator
• Folding top cover pull down actuator
• Folding top pump motor with valve manifold
• Position switches and limit switches:
- Pin receiver switch
- Luggage barrier switch
- Folding top cover open switch
- Top open switch
- Top closed switch
- 5 bow raised switch
- 5 bow lowered switch
• Tonneau release relay
• TONNEAU PULL DOWN ACTUATOR Fuse 20 A
• TONNEAU RELEASE Fuse 10 A
• BATT 2 Fuse 40 A
• REAR FOG/ALDL TOP SW Fuse 10 A
• Folding top mechanical components:
- Folding top
- Folding top cover
- Folding top valve 1
- Folding top valve 2
- Folding top valve 3
- Hydraulic lines and cylinders

Folding Top Cover Latch Actuator
The power folding top system includes a folding top cover that is powered open and close by a hydraulic system that is controlled by the FTC module. A power unlatch motor is used to unlatch the folding top cover before the folding top control (FTC) module powers the top cover open. The folding top cover unlatching is requested by the FTC module via class 2 message, but is executed by the body control module (BCM). When requested, the BCM applies battery voltage through the folding top cover release relay control circuit to the tonneau release relay. The relay is energized and battery voltage is applied through the folding top cover release control circuit to the latch actuator. The actuator is energized and the latch releases the folding top cover.

The electronics on this are very complex ,

System Operation
Before any movement of the power folding top is allowed, the folding top control (FTC) module must be aware of the following conditions:
• Unlatch the header. The FTC module reads the pin receiver switch is Inactive.
• The windows must be normalized. Refer to Power Window Reinitialization.
• The ignition must be placed in Accessory or RUN.
• The transmission must be placed in PARK, or with manual transmission, the park brake must be applied.
• Trunk status must not be ajar.
• The luggage barrier must be in place.
• The pump motor temperature must be within the operating range.

After the last cycle of power folding top operation, allow the hydraulic system a minimum of 4 minutes to bleed down before attempting manual operation of the top.
Your best bet take and have it checked for DTC'S - diagnostic trouble codes .
DTC B3666 Rear Tonneau Position Error
DTC B3667 Tonneau Release Circuit
DTC B1011
DTC B1291
DTC B1420
DTC B3602
DTC B3666
DTC B3667
DTC B3670
DTC B3971

Jan 23, 2017 | 2007 Chevrolet Corvette Convertible

9 Answers

Soft roof does not open


Find the two plastic caps sitting behind the sun visor on either side of the car. Gently prise them out, be careful as years of sun may have made them brittle. Behind the caps you should see a hexagonal head that the manual roof tool fits into (failing that use an allen key). Turning these hex heads will unlock the front soft top locks. (can't recall if it was clockwise or anti-clockwise, so be careful!). I found that you need to start one side, then unlock the other side, then come back to the first side and finish the job off. At this stage you should be able to lift the top up slightly to see it's no longer engaged in the front locks. Now move to the boot.

In the back of the boot you should see two small pieces of the trim that will lift out. These will be located on each side near the boot hinge mechanisms. Lift the trim peices out and you should see a lever (mine is made from cad plated something or other, ie it's a gold colour) and it will have red paint on it.

Fit the spanner/wrench end of the manual roof tool, or otherwise a 10mm open ended spanner, onto the small nut welded into the end of that red lever. I started on the left side(passenger side), levering gently down will unlock, and gently up will lock). You may need to alternate between each side, undoing a little and then swapping. NOTE: I found the levers won't budge unless the soft or hard top 'pins' are physically sitting in the lock holes. Don't force the levers as they should move quite easily.

Now that you have both the front and back locks undone, the last part is to unlock the tonneau or rear deck (soft top roof compartment). To do this you need the 10mm spanner/wrench again. You will find two hex heads tucked down in between the roll bar and the side of the interior trim (about 6-8 inches from the door frames), fit the spanner onto the head and turn until the tonneau cover releases. You should now be able to fold the soft top down by first raising the rear section of the soft top until the back lip is pointing to the sky, then lift the front section along with the rear section down into the compartment. I guess getting it back out is a reverse of the procedure above. Hoepfully I've got it all right as I've done it from memory.

Jul 12, 2008 | 1991 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

Is there a fuse for the fuel gauge on a 2003 mercesdes benz c320


You may go to your owners manual and look for a page that discuss about fuel fuse.

-
Jeep Tops and Jeep Soft Tops

Smit

Mar 17, 2013 | Mercedes-Benz Cars & Trucks

1 Answer

I have a 1988 vw cabriolet, it of course has a manual top, and it goes about 2/3 rds of the way then it wont budge anymore. ive got it down before, then the next day i tried to put it down and it wont go...


Make sure that as the top is folding backwards, the soft part of the top is not getting stuck in the hinges or between the support bars. If it is folding improperly, there might be a piece of the top that is keeping the rest from folding as it is supposed to. My father had this problem on his Mazda Miata once, but resolved it by paying closer attention when he opened it (he usually opened it from the driver's side, but once it started getting stuck, he had to walk around the car and make sure the passenger side was folding properly, too).
If it is not part of the soft top that is jamming you up, check the hinges all the way around. If one of them has a loose screw or broken rivit or something, that can jam it up too. Also, while the top is open, check the storage space that the top folds into -- if there is something in there, it could block the top from having the space to fold into.

May 27, 2011 | Volkswagen Cabriolet Cars & Trucks

2 Answers

I need to raise my soft top and lock it into place before installing newly rebuilt STCU ( soft top control unit). Can you outline procedure or give direction to finding said procedure?


You may need another person to execute this one. Please see link below for the manufacturer's procedure. As far as I know cabriolet has similar procedures on closing the top across all models.
http://www4.mercedes-benz.com/manual-cars/ba/cars/c207/en/in-depth/d62e8658.shtml

May 04, 2011 | Mercedes-Benz 500-Class Cars & Trucks

1 Answer

To remove 1993 mustang conv. top cylinders should top be up or down? thanks, bill


don't have 93. here's 94

Motor Assembly, Convertible Top Removal and Installation
NOTE: The folding top hydraulic cylinder rods should be in the fully retracted position.
Use absorbent rags or a container to catch any hydraulic fluid that leaks out when removing the fittings.
  1. Remove motor and pump assembly as outlined.
  1. Loosen each folding top motor upper and lower hose fitting on the sides of the folding top hydraulic lift motor and plate kit (533A00) .
  1. Remove the folding top hydraulic lift motor and plate kit .
  1. Remove each of the service folding top hydraulic lift motor and plate kit plugs one at a time and attach the tee fitting to the replacement folding top hydraulic lift motor and plate kit . NOTE: Make sure that the o-ring is installed in the bottom of each folding top hydraulic lift motor and plate kit port before attaching the hose tee fitting.
  1. Connect the folding top hydraulic lift motor and plate kit unit to a 12-volt power source and cycle the folding top hydraulic lift motor and plate kit in and out several times to purge the air from the folding top motor upper and lower hoses (53390) . Some noise squeal may be noticed due to the air. srb~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not overfill or the reservoir seal could be blown out.
  1. Carefully remove the rubber fill plug from the back and the reservoir and check the fluid level. The level should be at the bottom of the filler hole. If necessary, add Synthetic Mercon® Multi-Purpose Automatic transmission fluid E6AZ-19582-B (ESR-M2C163-A2) or equivalent.
  1. Replace the fill plug with a new fill plug.
  1. To install, reverse Removal procedure.
-------------------------------------------------------------------------------------------------------------------------------
Section 01-17: Convertible 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Lift Cylinder, Power Top Removal and Installation
NOTE: The cylinder rods should be in the fully-retracted position.
  1. Remove pump and motor as outlined.
  1. Remove the upper and lower hose fitting from the folding top hydraulic cylinder (50600) . Use absorbent rags or a container to catch any hydraulic fluid that leaks out when removing the fittings.
  1. Remove each of the service cylinder plugs one at a time and attach the hose fittings. NOTE: Be sure each fitting is installed in the correct position on the folding top hydraulic cylinder .
    NOTE: Make sure that the tetra seal is installed in the bottom of each of the folding top hydraulic cylinder ports before attaching the upper and lower hose fittings.
  1. Connect the folding top hydraulic lift motor and plate kit (533A00) to a 12-volt power source and cycle the folding top hydraulic lift motor and plate kit in and out several times to purge the air from the hoses. Some noise squeal may be noticed due to the air.
  1. Carefully remove the rubber fill plug from the back and the reservoir and check the fluid level. The level should be at the bottom of the filler hole. If necessary, add Synthetic Mercon® Multi-Purpose Automatic transmission fluid E6AZ-19582-B (ESR-M2C163-A2) or equivalent.
  1. Replace the fill plug with a new fill plug.
  1. To install, reverse Removal procedure.

Jan 21, 2011 | Ford Mustang Cars & Trucks

1 Answer

How to lower soft top manually on 1995 SL500?


It depends how much hydraulic pressure you have in the system. Take your softop tool and unlock the rear locks via trunk. see if you can raise the rear of the top (do not force because you will damage a ram). Next unlock your compartment lid and then the front of the top. You may be able to then retract it into it's storage compartment. The manual should also tell you how to release the hydraulic pressure via your pump in the trunk by your spare. hopefully I have been helpful

Jul 15, 2009 | 1995 Mercedes-Benz SL-Class

1 Answer

How to remove the center console on a 1992 600SEL?


here is a place you can get a free online manual for your car!

maybe it will show where they hide the screws!

http://www.onlinefreeebooks.net/automotive-machinery-power-equipment-ebooks/mercedes-benz/1992-mercedes-benz-600sel-operators-manual-pdf.html

Jon V.

Feb 28, 2009 | 1992 Mercedes-Benz Mercedes Benz S Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...