Question about 2006 Chevrolet Cobalt
My 2006 Chevy cobalt wouldn't start I got a jump and it started, it happend again a week later, replaced the battery now the lights come on but no crank or no start. It has manual locks..if that matters
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Are you using the original key that came with the car? The chip in that key may have gone bad. Try using the spare key that should have come with the purchase of the car. You may also be having battery issues. If all else fails....call the people who really know how to rape you...DUM Dum dummmmm....the dealer
Posted on Dec 31, 2008
Try this Put your key in turn it on dont start wait 10 mins remove key wait 10 seconds repeat this a total of 3 times. Your theft light should go out. As long as the light is on your fuel system is disabled. If that dont work try a different key do the same thing. If that dont work a dealer needs to probably replace and reprogram your ignition switch and keys
Posted on Apr 11, 2009
Start with the basics. Check the fuses (all of them) with a test light and be sure you have power to each and that they are good. Then be sure that the power lock relay is good by swapping it with another relay in the fuse block. If the fuses are good and the relay is swapped and the locks still aren't functioning, you may have an issue with the BCM. The BCM can be programmed to change the behavior, but if the car has had water damage, or other stress to the BCM (voltage, heat, etc.), it can sometimes damage the BCM and you will need to replace it and reprogram it at a GM dealership.
Posted on Jul 25, 2009
SOURCE: Chevy Cobalt Jump Start -
You do need to connect the ground lead to the battery. Connect the positive lead to the battery post, then connect the ground lead to metal bracket or chassis nut on the colt bolt. Then connect the positive to the other car and negative to the other car. Keep in mind, always connect the positive first and disconnect the positive last.
Posted on Nov 26, 2010
Tips for a great answer:
Mar 28, 2014 | Cars & Trucks
Oct 18, 2011 | 2006 Chevrolet Cobalt
Jul 25, 2010 | 2006 Chevrolet Cobalt
Dec 20, 2009 | 2006 Chevrolet Cobalt
Jan 13, 2009 | 2006 Chevrolet Cobalt
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: