Question about Cars & Trucks

1 Answer

95 honda accord,wheels stuck to axles - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The brakes are stuck on hit the wheel not to hard whilst a helper tries to move back and forwards they should unlock

Posted on Dec 30, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 491 Answers

SOURCE: where is the thermostate located on a 1995 honda accord

follow the top radiator hose. that hose leads the the therostat housing

Posted on Oct 19, 2008

SOURCE: 95 honda accord

I believe there's either a set screw or a release pin in back of the rest post(s) and then you can completely remove after that

Posted on Oct 28, 2008

tony chavous
  • 50 Answers

SOURCE: vss for honda accord 95

there is a ten millimeter bolt holding it in remove this then depending if you have a factory or afterrmarket replacement you may have to remove the three tourqe scews fom sensor and replace just the electrical portion of the swith and reuse the shaft. Be sure to lubricate the shafts oring before reinstalling and double check to makesure the sensor is seated before installing the ten millimeter bolt. this can some times be tricky because the gear on the sensor doesnt mesh eith the gear in the diff just rotate the sensor side to side if this happens until it bottoms out

Posted on Feb 01, 2009

  • 87 Answers

SOURCE: 2001 honda accord factry wheels.

They should aslong as they are the same lug pattern

Posted on Mar 27, 2009

  • 1201 Answers

SOURCE: MY 95' Honda Accord Speedometer stops working on

Have the speed sensor checked, it is on the side of the tranny.

Posted on Aug 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Center axle nut will not come off of my 1993 accord


I've had to use a monkey wrench on a socket, with a large, three foot long piece of steel pipe as a breaker bar, to remove some of those stuck Accord axle nuts.

Mar 18, 2012 | 1993 Honda Accord

1 Answer

How to remove the driveshaft from a 1987 honda accord


you do not have a driveshaft on a 1987 honda accord.. they are front wheel drive... you have two drive axles.. but no driveshaft buddy

Mar 22, 2011 | 1987 Honda Accord

2 Answers

What problems will come with a 1990 Honda Accord with a passenger wheel turned in? Is it the axle? Should I purchase a car with this problem?


not really big problem on the axle they cost about $60 on the axle with exchanged labor will cost you about $80 to $100 its been worn out for about 80 to 150 miles when rubber cover loose or rip-off.

Feb 26, 2011 | 1990 Honda Accord

1 Answer

I need to know how to take out the front rotors coz everytime i brake, my steering wheels shaking


ON THE 95 AND 96 ACCORD THE ROTORS WERE BOLTED TO HUB. ITS A JOB! U NEED A HUB REMOVER,AXLE NUT SOCKET AND METRIC TOOLS. IF U NEED STEP BY STEP I CAN CLARIFY. IT TAKES ABOUT 2-3 HOURS A SIDE DEPENDING ON HOW EXPERIENCED U ARE

Aug 04, 2010 | 1996 Honda Accord

1 Answer

How to replace front wheel bearings on a Honda Accord 2000?


Hi:
Changing the front wheel bearings on your Honda Accord are a bit of work: You must remove both front hub assemblies, and that entails undoing the axle nut, the tie rod , the brake caliper, and the other attachpoints on the hub. Then the wheel bearing needs to be pressed out of the hub. I usually have a machine shop do this for me. This is just a basic overview of the process, but wanted to let you know what you are in for...hope this helps!

Apr 23, 2010 | 2000 Honda Accord

1 Answer

1987 Honda Accord Rear Wheels Not Running


what do you mean by rolling, is the car
been seating for a while.my sense tell me that u have frozen brakes in the rear, maybe due to frozen emergency brake.

May 11, 2009 | 1993 Honda Accord

1 Answer

I have problem mi 91 honda accord ex coupe has vibration when im driving 55 & up im replaced l/f axle,control arm & balance the tires


Is there vibration in steering wheel? Check for bent wheel then check axle...again. Remans are not always good and new ones are just a bit more expensive. Also, check the output shaft bearing for excess play. Also try rotating tires to confirm it's not there.

May 10, 2009 | 1991 Honda Accord

1 Answer

Transmission


Iit could be your half shaft axles that need replacing rather than the tranny. Jack up the front of your vehicle and support it with jack stands (safety should be your first priority). Grab your wheels and try spinning it. If it spins freely, you'll need to replace your axle. If your able to spin your wheel and engage the opposite side axle, chances are your axles are okay and the tranny is shot. Good luck.

Feb 20, 2009 | 1996 Honda Accord

4 Answers

Honda Accord 2003 - Engine and steering vibration


My 2003 honda accord was doing this too. The problem is the inner CV axle bearings. The fix is to replace both CV axles. When you choose your CV axle choose a new one not a reman, there are known problems with used CV axles. It's not a hard job. It took me 1hr to do both sides on a lift.

Oct 21, 2008 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...