2004 Toyota Prius Logo

Related Topics:

A
Anonymous Posted on Dec 29, 2012

2004 prius reset light on abs

How do you reset the light on abs and vsc

4 Related Answers

Anonymous

  • 580 Answers
  • Posted on Jul 09, 2009

SOURCE: trc off vsc and abs lights on display

Find and press your TRC button this turns the TR-action C-ontrol back on, and should turn off, the V-ariable S-tability C-ontrol light and the A-ntilock B-rake S-ystem light. If it does not rengage have the traction control switch checked

Ad

Anonymous

  • 21 Answers
  • Posted on Aug 04, 2009

SOURCE: 2004 Toyota 4Runner, Regarding The VSC TRAC and VSC OFF lights

Check your switches for the VSC, some get bumped on (due to their location) and some get stuck in the "on"position.

Anonymous

  • 1986 Answers
  • Posted on Sep 09, 2009

SOURCE: ABS PROBLEM

Look up above your brake pedal and you should see a switch that is connected to it. This switch controls your brakes and in some vehicles, is tied in to the safety system. Change this and see if your van goes into gear ($10 part)

Anonymous

  • 2 Answers
  • Posted on Mar 04, 2010

SOURCE: brake vsc off and abs lights are on

Krafty930 with brake, VSC off and ABS lights on. You share a common problem with many Toyota owners. My 2003 Sequioa has the same issue. There is no solution. Dealers will replace the air sensors and then the computer all for $2,500 - $3,500. This will not solve the issue. The internet has thousands of complaints re this problem, but Toyota has disowned the issue and declined resolution, even for vehicles under warranty. The lights drive me crazy and I still don't know if there is a functional problem, a wiring problem or a computer problem with the VSC system. To date, I have learned of no reports relating this problem to vehicular deaths, so I really am not holding my breath waiting for Toyota to provide a solution. Sorry that you share this problem, but perhaps my response will help to stop you from "spinning your wheels" too much trying to resolve this issue.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

ABS ON,BRAKE RED L ON ALARM ON HARD PEDAL HOW CAN I FIND THE PROBLEM

VSC ABS and ! lights plus red (!) - Toyota Prius Forum ...

www.priusonline.com/...toyota-prius.../19804-vsc-abs-lights-plus-red.ht...

Jun 3, 2008 - 8 posts - ‎3 authors
If the accumulator fails, you will get a red brake warning light and the pump will now run continuosly until it burns out. ... hydraulic pressure to the brake system and "no"red warning lights. .... Fog Lights, PassGas, Toyota Prius General Discussion, 4, 10-13-2005 09:12 AM ... 11-13-2015 10:01 PM by Tim Lee.

Alarm with Brake Light, ABS, VSC and amber warning lights ' PriusChat

priuschat.com > ... > Gen 2 Prius Care, Maintenance and Troubleshooting
Jul 26, 2005 - Later that same day - I started getting an alarm - as soon... ... Gen 2 (2004-2009) Toyota Prius Forums > Gen 2 Prius Care, ... Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by NorthStar, Jul 26, 2005. ... I am getting the red BRAKE LIGHT, the amber waming symbol, ABS, and ... VSC, ABS, (!) and emergency brake light on
Feb 5, 2010
Brake, Brake warning, ABS, VSC appear
Oct 5, 2008
More results from priuschat.com
1helpful
2answers

I have asked question twice and no answer yet, even spoke with live chat

You can't turn out the vehicle speed control/traction lights without a scanner/code reader. The light is on because it has detected a problem with this system. The ABS controls the VSC. You need to have the codes scanned and determine what is at fault
0helpful
1answer

How do I erase the ABS and VSC codes in my 2007 Prius

Why would you do that?

You need ALL Data (codes) to diagnose the
Systems Problem & make the repairs

If it has no problems, the dash MIL Lamp will go
out, when the system runs the ABS Braking Check
at 16 to 22 plus mph
0helpful
1answer

2005 Toyota Prius. Red Brake and yellow ABS and VSC warnings are continuously on

run the fault codes to find out the faulty sensors /solenoids / servos.
0helpful
1answer

Fault lights

That happened to me on my 2000 toyota corolla and it was in the linkage adjustment on my emergency brake handle. I tightened up the linkage and then when I would release the handle, the light would go out. Hope that solves your problem.
1helpful
1answer

Click sound when shifting gear and parking

The clicking noise could be related to the bigger problem with the abs/vsc actuator, this is a kind of common problem on the prius models, the actuator should be replaced, this is a very expensive part (around $2000) for the part only, while the warning light is on the traction control and abs are disabled, it will still brake normally.
2helpful
2answers

Check engine light and vsc trac off lights stay on. Cannot turn svc off by pressing button on Dash

Hi, have you scanned the vehicle to see why your check engine light is on? IF no, you need to. Toyota/Lexus computer system illumniates both engine light and VSC lights whenver a fault occurs in either unit. VSC or stability control is like trac-control or ABS braking system. Get car scanned and make sure all computers are scanned for additional codes, repair them first reset lights and test drive. ON a side note, fixing check engine light will usually take VSC light away also, however sometimes the VSC system will glitch out and a Steering Angle relearn is necessary, it takes about 3mins to perform and a good quality scan tool with 2004 current software. Good Luck.
Not finding what you are looking for?

143 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...