Question about 2000 Nissan Maxima

Open Question

P1130 check engine code nissan maxima

1999 nissan maxima

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: Check Engine Light 1996 Nissan Maxima

The best way is to use a scan tool to clear the codes, that will turn off the light, also disconnecting the battery over night may work, but no completely sure about that, it varies from year to year.

Posted on Sep 23, 2008

Ad
hiseyj
  • 99 Answers

SOURCE: i have a 1999 nissan maxima with code P1320

This code is a crapshoot. There are two main things it could be and they are both expensive. There could be wire breakage in the engine harness. There is a thick harness coming out of engine bulkhead on the passenger/right side and it has a slight bend to it. With the engine idling grab that bend and give it a couple of twists and yanks. If the engine stumbles or misses that is the source of your troubles. If not, you more than likely need to replace the coils. Any one of the six coils could be causing the code so I recommend replacing all six at the same time. You could buy one coil for the front bank and one for the rear and swap it between cylinders to see which coil is causing the code. This is time consuming but cheaper.

Posted on Nov 26, 2008

  • 1 Answer

SOURCE: I have two codes P0304 & P1130 my check engine ligth is on

i have the same problem. I tried everthing and nothing worked until I found a vaccum line that is leaking air between the throttle body and the fire wall on the passenger side where there are a junction of three vac. lines meeting. I replaced and the both the code and engine light never came back yet after 120 driving.

I still have to reset the I/M monitors for emmisions.

Posted on Jan 31, 2009

  • 1 Answer

SOURCE: reset code for 2006 nissan maxima radio...

just changed battery,,all good,,radio is out,,tried fuses ,, what can i do to get the radio back on...

Posted on Sep 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 nissan maxima idles rough when engine warms up and more prominent during summer months. no service warning light indicates the condition.what could be the cause?


May need to have the engine coolant temp sensor checked. It normally does not set a fault code but does send signal for fuel control until the engine warms up enough to enter closed loop fuel control.

Nov 04, 2014 | 1999 Nissan Maxima

1 Answer

Code for 1996 nissan pick up p1130


P1130 Swirl Control Valve Control Solenoid Valve.

Oct 31, 2012 | Nissan Cars & Trucks

1 Answer

How do i fix p1130 AND P 1440 code on my 2000 Nissan maxima? It takes about 5-6 minutes to crank up.


P1130 Swirl Control Valve Circuit Malfunction - With Automatic Transmission Possible Causes
  • Check for air leaks in the Air Induction system (e.g., in the intake manifold)
  • Check for leaks or looseness in hoses and tubes between the intake manifold, vacuum tank and swirl control valve actuator
  • Check for leaks or looseness in the hoses between the air cleaner assembly and the swirl control valve vacuum check valve
  • Crankshaft position sensor (REF) signal problem
  • MAF sensor has failed (it may be dirty or contaminated)
  • One-way check valve has failed
  • Swirl control valve actuator has failed (it may be damaged or sticking)
  • Swirl control valve control connector is damaged (check pins for damage)
  • Swirl control valve circuit is open, shorted to ground or shorted to voltage
  • Swirl control valve has failed
  • PCM has failed
  • Throttle position sensor has failed
  • Vacuum tank has failed

P1440...EVAP Control System (Small Leak)
Check your fuel cap & reset code,

Good luck, hope this helps,,,

Jul 15, 2011 | 2000 Nissan Maxima

2 Answers

1999 nissan maxium,air bag lite flashing,traction con &slip lite on,check engine lite,engine miss fire sparatic.where do i start to look?


Have the trouble codes read and they will tell you what is wrong and needs to be fixed on your car. Most larger auto parts store will scan the codes for free and give you a printout of what's wrong.

Jan 11, 2011 | 1999 Nissan Maxima

1 Answer

1999 Camry 4 cyl. 104k miles, throwing codes p0125, p1130, p1135


P0125- Engine not reaching operation temp quick enough. Possible problems:
  • Insufficient warm up time
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty coolant temp sensor
  • P1130- A/F Sensor Circuit Range/performance, Bank 1 Sensor 1

Oct 15, 2009 | 1999 Toyota Camry

1 Answer

Engine knock 1999 maxima


mate check your timing.it could too advance bro.have that checked and i think it should be allright

Oct 03, 2009 | 2003 Nissan Maxima

1 Answer

I have a 1999 nissan maxima 5 spd. the check engine light flashes while i'm accelerating. It finally stayed on for a breif while, the code read p0303 (cylinder 3 misfire) what can i do to solve it?


if there is a misfire in the #3 cylinder i would suggest checking the spark plug to see if it is dirty or oiley etc other than that the ht leads hope this helps regards Jim

May 01, 2009 | 1999 Nissan Maxima

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...