Question about 2006 Mercury Mariner

Open Question

Mercury mariner 2007 how do u get the license plate lamp bulbs out to change it

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dnewcombe1
  • 1564 Answers

SOURCE: how do i change the brake bulb for my 2007 mercury

Are you positive that there are only 2 screws? If so give a good push with your thumbs near the ceanter of the assembly it should pop out. If not theres another screw that your missing.

Posted on Jul 29, 2009

MNfisherman
  • 11896 Answers

SOURCE: how do I fix a burned out license plate light on a

Unscrew the bulb lens and pull out bulb and replace. Not hard at all

Posted on Sep 12, 2009

rtpflh
  • 546 Answers

SOURCE: Side Marker Bulbs

you need to remove entire assembly to access bulbs.it is secured by small hex head screws & a ''sliding tab'',an L shaped piece you pry up w/a flat screwdriver.

Posted on Sep 20, 2009

Ford007
  • 131 Answers

SOURCE: how to I change the right tailight on my 2006

Open the liftgate and remove the 2 screws holding the lamp. Now grab the lamp and pull straight back to dislodge the spring clips. Then twist the sockets to remove the bulbs.

Posted on Mar 17, 2010

  • 89 Answers

SOURCE: how to change fog light bulbs for 2009 Mercury

just remove it or you can modified by changing the whole thing with the external switch..

Posted on Jan 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chevy equinox license plate light won't work after bulb and fuse replacement


Do the park lamps work ? license plate lights get power from same fuse ! Check ground wire ! use a volt meter an do voltage drop test ! Voltage Drop Testing The fuse for the license plate lights is in the under hood fuse box -engine compartment ! fuse #12 RT PRK LAMP 10Amp .

May 23, 2015 | 2007 Chevrolet Chevrolet Equinox LT

1 Answer

Back up lights not working


Assuming it has automatic, 10A fuse 29 in the smart junction box supplies power to the reverse lamps relay. If the fuse is OK, the relay could have failed. Fuse 3 in the smart junction box may be open, causing the license plate lights to be off.

Mar 31, 2014 | 2006 Mercury Mariner

1 Answer

How do i change the license plate bulb on a 2004 tb ls


here is the instructions on how to replace license plate bulbs.

Remove the 2 screws that retain the license lamp lens to the liftgate.

  • Remove the license lamp lens from the liftgate.
  • Remove the bulb (1) from the socket.


  • 8e7cf48.gifaba90ae.gif

    Oct 11, 2010 | 2004 Chevrolet TrailBlazer

    1 Answer

    How to I change the right tailight on my 2006


    Open the liftgate and remove the 2 screws holding the lamp. Now grab the lamp and pull straight back to dislodge the spring clips. Then twist the sockets to remove the bulbs.

    Mar 15, 2010 | 2006 Mercury Mariner

    1 Answer

    Change tag light bulb


    1. Remove two screws retaining the lamp to the rear license plate lamp shield.
    1. Rotate socket one quarter turn from backside of lamp and remove the miniature bulb (13466) .

    1. Install new miniature bulb into socket.
    1. Install socket in lamp .
    1. Secure lamp to rear license plate lamp shield with two screws and tighten to 2 Nm (18 lb-in).


      ak1473a.gif


      Item Part Number Description 1 13508 Rear License Plate Lamp Shield 2 14A583 Lamp Lead Wire 3 383356-S Nut (4 Req'd) 4 56000-S Screw (4 Req'd) 5 13550 Lamp (2 Req'd) 6 13466 Miniature Bulb (2 Req'd) A — Tighten to 2 Nm (18 Lb-In)

    Feb 27, 2010 | 1998 Ford Windstar

    1 Answer

    How do I change the license plate bulb rear on a 2007 Kia Rio?


    For the Kia Rio5 model, the lenses above the license plate pop out by using a flat-head screwdriver. The lamp and socket all comes out together... put in new bulb and pop lenses back in and you're good to go. No real tools required other than something to pry the lenses out.

    Dec 20, 2009 | 2006 Kia Spectra

    1 Answer

    2007 Pontiac G6. Rear license plate bulb socket dead


    park lamp and license plate share same fuse.check park lamp fuse.if fuse good you have ground wire problems.

    Nov 30, 2009 | 2007 Pontiac G6 GT Convertible

    1 Answer

    1999 Dodge Neon rear license Plate bulb


    LICENSE PLATE LAMP BULB
    REMOVAL
    1. Remove screws attaching license plate lamp to rear bumper
    2. Remove lamp from bumper.
    3. Remove bulb socket from lamp.
    4. Pull bulb from socket.

    INSTALLATION
    1. Install bulb into socket.
    2. Install bulb socket into lamp.
    3. Place lamp in position.
    4. Install screws attaching license plate lamp to rear bumper.

    Oct 08, 2009 | 1999 Dodge Neon

    1 Answer

    How do I change the rear license plate light bulbs?


    License Plate Lights Removal & Installation License plate lamp retainer clips
    a555c7b.gif
    To Remove:
    Remove or disconnect the following:
    1. License plate
    2. Pin-type retainers and the luggage compartment lid trim panel
    3. License plate lamp electrical connector
    4. Lamp socket from the license plate lamp
    5. Using a suitable tool, through the access hole, release the clips and remove the license plate lamp
    To Install:
    1. Install or connect the following:
    2. License plate lamp
    3. Lamp socket to the license plate lamp
    4. Electrical connector
    5. Luggage compartment lid trim panel
    6. License plate

    Jun 06, 2009 | 2000 Lincoln LS

    1 Answer

    License plate bulb 99 alero


    remove the 2 license lamp screws from outside,above the lic.plate then from insidethe trunk pull up the lic.lamp housing and replace the bulb.it should pull straight out

    Apr 21, 2009 | Oldsmobile Alero Cars & Trucks

    Not finding what you are looking for?
    2006 Mercury Mariner Logo

    Related Topics:

    44 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    fordexpert

    Level 3 Expert

    5467 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...