Question about 2005 Chevrolet Suburban

Open Question

Removing back seat of a 2005 suburban - 2005 Chevrolet Suburban

Posted by Anonymous on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: How do you remove the back bench seat in 2005 Suburban

It's easy if you follow the directions in the owners manual but very heavy. Lift lever 1, then 2 then pull straight up. It weighs a ton but opens up the back a lot.

Posted on Aug 19, 2009

  • 1297 Answers

SOURCE: The left latches for the

sound like the latch has failed and will need to be replace

however, you can try this...
with an assistant, have them push and pull on the top of the seat while you try to move the #1 lever
If you are successful then make sure you lube the latch well before locking into place again.

use a premium lube like white lithium and what ever you use AVOID 10w40 for it will not help in the long run

Posted on Apr 04, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What steps to take to remove third seat in 2001 chevy surburan

All actions to be done from the trunk area of the 2001 Suburban

1. Lay seat back down by lifting lever 1 and pushing seat back forward.
2. Grab center lever (labeled 2) at seat bottom, back, middle. Pull up on lever and on bar to roll seat up onto it's front.
3. Pull finger tab at center of seat (unlocks seat from floor) and pull seat towards back of vehicle on rollers.
4. Lay seat down. Seat is a beast and best to use two people to get seat to the ground!

Nov 18, 2010 | 2001 Chevrolet Suburban

2 Answers

Driver side heated seats keep coming on when they want to, on my 2005 Chevy Suburban Z71. They get really hot. I have found that if you leave the base of the seat on the low seating then the back or lumbar...

The problem could be the drivers seat module.It is under the seat and controls the drivers seat functions.There is a service bulletin for seats that will only work for a few minutes and then shut off by themselves.The fix for this is having the drivers seat module reprogrammed but I don`t know if your problem would fall in this bulletin.Only the dealerships can program these modules.Hope this helps.Good luck.

Feb 04, 2010 | 2005 Chevrolet Suburban

1 Answer

Help removing the third seat on my Suburban

first open your rear hatch/doors.2nd fold third seat over buy using latch on right side. 3rd pull relase handle in middle of seat on the back bottom . this unhooks the back latches. use the other hand to pull meatl bar up, tipping seat. 4th while holding metal bar with the one hand use the other hand to pull small release strap. it is too the right of the metal bar, this releases the front latches, pull rearward the seat moves out. the seat is heavy good luck

Dec 30, 2009 | 2004 Chevrolet Suburban

1 Answer

2005 Suburban airbag light is on. What do i need to do to fix it?

One thing you can check, and that is to look under the driver and passenger front seats, there should be a few wires and connections, check that these connections are good, sometimes things like bottles etc that have been put on the floor can roll under the seat and disturb the connections or passengers in the rear can accidently kick the installation.
hope this helps

Dec 30, 2009 | 2005 Chevrolet Suburban

1 Answer

No heat from the driver side seat in my 99 Suburban.

its the heating element in the seat its brunt out, gonna have to remove seat cover to remove element, good luck.

Oct 27, 2009 | 1999 GMC Suburban

1 Answer

How do you remove the back bench seat in 2005 Suburban?

It's easy if you follow the directions in the owners manual but very heavy. Lift lever 1, then 2 then pull straight up. It weighs a ton but opens up the back a lot.

May 28, 2009 | 2005 Chevrolet Suburban

1 Answer

Mounting third row seat in 2008 Suburban 1FL, LS 1500 - Fleet veh

I drive a 2008 Suburban LT and my company has a true work "fleet" suburban. The only difference between these two that I have is the back of the fleet vehicle has a thick rubber mat in the back with no seats. After removing the black mat I found that the channels and rods that the rear seats clip into are present. The third row seats are installed by clipping them in no bolts or tools are required.

Jan 20, 2009 | 2008 Chevrolet Suburban

1 Answer

2005 suburban

It could have something stinky in the button or the button may need to be replaced.

Oct 07, 2008 | 2005 Chevrolet Suburban

Not finding what you are looking for?
2005 Chevrolet Suburban Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides