Question about 2005 Ford Freestar

Open Question

How to replace lower control arms on 05 ford freestar

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

breddi2
  • 126 Answers

SOURCE: Can you replace the lower ball joints in the control arms

You can replace them seperately,but they need pressed out and in. Other methods of removing and installing likely will damage control arm.

Posted on Apr 23, 2009

tneubauer
  • 437 Answers

SOURCE: how to replace lower control arm on a 2000 ford

Procedure from the Ford Repair manual.

http://s219.photobucket.com/albums/cc270/anubiscycle/?action=view&current=lowercontrolarm2000winstar.jpg

Posted on Jun 06, 2009

motor1258
  • 6674 Answers

SOURCE: Need new lower control arm ball joint repair

If you go to (www.repairpal.com) and enter all your vehicle info, and select the repair in the list, it will give you prices for your particular area, based on your zip code.

Posted on Dec 22, 2009

Testimonial: "Thank You!"

daves944
  • 1050 Answers

SOURCE: egr valve replacemebt

It's bolted onto the intake, next to the throttle body. If you look into the engine compartment and see the oil dipstick, look up and to the right. It will have a steel tube coming up to it from the exhaust. Why do you want to replace it? They rarely fail. EGR problems (codes) on Fords are usually caused by the Differential pressure feedback sensor.

Posted on Jan 24, 2010

ZJLimited
  • 17970 Answers

SOURCE: need underhood fuse manual diagram for an 05 ford

Check here the 2005 Ford Freestar - Owners Manual (page 235 and next).

Hope this help (remember rated and comment this help). Good luck.

Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oxygen sensor 05 freestar


You need to find out which oxygen sensor needs to be replaced, your vehicle could have 2 or 3. They are located in the exhaust system either in the exhaust manifold or the exhaust pipe before the catylitic converter and one after the catalytic converter. http://www.rockauto.com/en/catalog/ford,2005,freestar,3.9l+v6,1430707,exhaust+&+emission,oxygen+(o2)+sensor,5132 Where is the o2 sensor on 2005 ford freestar 3 9

Feb 15, 2017 | 2005 Ford Freestar Wagon

1 Answer

05 ford freestar front ac blower has no fire to it has new control head and new relay and new resistor


Has no B+ voltage , not fire ! Do you know how to do basic automotive electrical testing (trouble shooting ) ? Go to

Jun 28, 2016 | 2005 Ford Freestar

1 Answer

Electric latch on the rear Hatch door will not unlock


I guess ford was trying to make a couple more bucks by not putting key locks on all doors. Anyway, if you crawl inside and pop the small cover(about 2"x2") off the inside of the hatch where the latch is located you can reach in with a screwdriver and manually move control arms. The lever on the back/far side of assembly is in the locked position, you need to move to the opposite side left or right of it's current position, this will unlock the latch and should allow you to open the door. You mave have to pop acutor arm loose to move it. My problem ended up being the outside cover {license plate frame)seal had been damaged by a ford mechanic, that or it was defective. Water got in and damaged the the lock acuator. Had to replace entire assembly as ford does'nt offer just the acuator. Sealed the outside cover with clear silione.

Try this link for more info:

tailgate 2004 Ford Freestar

Check similar answers at this site:

2005 ford freestar back hatch door wont open

Apr 11, 2015 | 2004 Ford Freestar

1 Answer

What is the best method for changing the lower ball joint/control arm on a 2004 ford freestar?


The lower ball joint original is riveted into the lower control arm. If you can get to the lower control arm with a drill then the rivets can be drilled out and the joint removed . I find it quicker to remove the lower arm and do the job in a vice on the bench. Replacement ball joints will come with grade 8 bolts ( auto engineering quality) and will simply bolt into place using the holes for the rivets. So the procedure will be to jack the vehicle and place securely on jack stands. remove the wheel, remove the ball joint nut and using a ball joint removing tool drive the ball joint taper out of the support arm ( strut) Remove the inner pivot bolt ( remember to note the position of the lock washer as it is encentric and alters the wheel alignment) put the arm in a vice and carry on.

May 10, 2014 | 2004 Ford Freestar

2 Answers

I have 2004 ford freestar it makes a poping noise as u drive changed cv joint don't know what else it might be


lots of things can make it "pop". check the hub bearings, the stabilizer links, the tie rod ends, the balljoints, the struts and strut mounts, the engine cradle bushings, the control arm bushings ,and the engine mounts. GOOD LUCK!

Jun 14, 2012 | 2004 Ford Freestar

1 Answer

How to change the coil in a 2004 ford freestar 3.9L


The ignition coil on a 2004 Ford Freestar is a bit of work to replace. Here are some steps:
1. Disconnect the negative battery cable;

2. Remove windshield wiper arms (you might need a cheap puller to get the arms off the spindles), marking the windshield with tape to help you reposition the wiper arms;
3. Remove the trim screws from the upper cowling and remove the cowling;
4. Remove a bunch of screws from the lower cowling, taking care not to remove the screws holding the wiper motor onto the lower cowling;
5. Remove the lower cowling with the wiper motor attached;
6. There is a large black piece on the passenger side of the car that covers up a big part of the engine. There are three screws that if you loosen you'll be able to remove this part;
7. Now you can get to the ignition coil, which is on the back of the engine; remove the wires (marking where the go);
8. There are only three screws that hold the coil on. Two on your right and one on the left (as you look into the engine compartment). Remove the three screws and the coil comes right out.
Good luck!

Sep 10, 2011 | 2004 Ford Freestar

1 Answer

Need underhood fuse manual diagram for an 05 ford freestar mini van


Check here the 2005 Ford Freestar - Owners Manual (page 235 and next).

Hope this help (remember rated and comment this help). Good luck.

Mar 23, 2010 | 2004 Ford Freestar

1 Answer

2004 freestar


the most common cause of this in your Ford based on my dealer related repairs would be a part called the rotating ribbon contact (Ford refers to this part as the Clock-Spring contact.) that connects the steering wheel airbag to the steering column wiring, this contact coils and uncoils as the wheel is turned left and right and makes a solid connection to all steering wheel mounted components and controls. To change this part you must dis-arm the airbag and remove the steering wheel, if u do this repair yourself it is very important that u dis-arm the SRS system before starting work, this can be done by disconnecting the battery for 1 hour.

Feb 03, 2009 | 2004 Ford Freestar

Not finding what you are looking for?
2005 Ford Freestar Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...