Question about 2002 Hyundai Santa Fe
Where is the map sensor on a hyundai santa fe 2002 v6
If you have a mass air flow sensor in the big boot from air cleaner housing to throttle body, likely there is no map sensor.
Posted on Dec 30, 2012
Look on the top intake plenum or surge tank another name for plenum look on side upper plenum you will see map sensor with a vacuum going to it.map sensor has two small bolts holding it in place cant miss it.
Posted on Dec 30, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You might have lost your lower gears, I would have someone look at it to see if your gears are gone or if its just a faulty sensor.
Posted on Jun 15, 2009
SOURCE: Knock sensor location
Knock Sensor Description addthis_pub = 'car-suff'; A quality Knock Sensor is more important than ever thanks to today’s increasing gas prices. Your Engine Knock Sensor enables your vehicle to obtain the optimum combination of timing and fuel/air mixture to generate power and efficiency and that means less wasted gas. Our guaranteed low prices make us your one-stop Knock Sensor Location. Regardless of the brand, make or model car, truck, van or SUV you drive, we make it easy to locate the application specific Knock Sensor that’s perfect for your vehicle. Our state of the art parts locating system puts you just a few mouse clicks away from the Knock Sensor you need and at a price you cannot beat anywhere. Click. Click. Click. And you are there. In addition to robbing you of fuel economy and performance a faulty Knock Sensor can cause expensive damage to your engine. Remember, the Knock Sensor keeps fuel from detonating in the cylinder … exploding rather than quickly burning as it should. If not replaced a faulty Knock Sensor can quite literally cause hundreds if not thousands of dollars in damage. There is really no need to look any further to find the Knock Sensor that’s application specific for your car, truck, van or SUV – high performance or family vehicle. We’ve got guaranteed low prices and shipping that other suppliers envy. Give us a try, we think you’ll be happy … in fact we guarantee it.
Posted on Jun 20, 2008
The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.
Posted on Apr 06, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
Tips for a great answer:
Mar 24, 2017 | 2004 Hyundai Santa Fe
Dec 30, 2016 | 2002 Hyundai Santa Fe
Jan 06, 2015 | 2002 Hyundai Santa Fe
Mar 07, 2013 | 2001 Hyundai Santa Fe
Apr 23, 2012 | 2002 Hyundai Santa Fe
Mar 20, 2012 | 2001 Hyundai Santa Fe
Sep 01, 2011 | 2002 Hyundai Santa Fe
Jun 30, 2011 | 2002 Hyundai Santa Fe
Dec 17, 2010 | 2002 Hyundai Santa Fe
Apr 02, 2017 | 2002 Hyundai Santa Fe
315 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: